[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241021-tidss-irq-fix-v1-5-82ddaec94e4a@ideasonboard.com>
Date: Mon, 21 Oct 2024 17:07:49 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Devarsh Thakkar <devarsht@...com>, Jyri Sarha <jyri.sarha@....fi>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Jonathan Cormier <jcormier@...ticallink.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>, stable@...r.kernel.org
Subject: [PATCH 5/7] drm/tidss: Clear the interrupt status for interrupts
being disabled
From: Devarsh Thakkar <devarsht@...com>
The driver does not touch the irqstatus register when it is disabling
interrupts. This might cause an interrupt to trigger for an interrupt
that was just disabled.
To fix the issue, clear the irqstatus registers right after disabling
the interrupts.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@...r.kernel.org
Reported-by: Jonathan Cormier <jcormier@...ticallink.com>
Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1394222/am625-issue-about-tidss-rcu_preempt-self-detected-stall-on-cpu/5424479#5424479
Signed-off-by: Devarsh Thakkar <devarsht@...com>
[Tomi: mostly rewrote the patch]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
drivers/gpu/drm/tidss/tidss_dispc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index 99a1138f3e69..515f82e8a0a5 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -700,7 +700,7 @@ void dispc_k2g_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask)
{
dispc_irq_t old_mask = dispc_k2g_read_irqenable(dispc);
- /* clear the irqstatus for newly enabled irqs */
+ /* clear the irqstatus for irqs that will be enabled */
dispc_k2g_clear_irqstatus(dispc, (mask ^ old_mask) & mask);
dispc_k2g_vp_set_irqenable(dispc, 0, mask);
@@ -708,6 +708,9 @@ void dispc_k2g_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask)
dispc_write(dispc, DISPC_IRQENABLE_SET, (1 << 0) | (1 << 7));
+ /* clear the irqstatus for irqs that were disabled */
+ dispc_k2g_clear_irqstatus(dispc, (mask ^ old_mask) & old_mask);
+
/* flush posted write */
dispc_k2g_read_irqenable(dispc);
}
@@ -837,7 +840,7 @@ static void dispc_k3_set_irqenable(struct dispc_device *dispc,
old_mask = dispc_k3_read_irqenable(dispc);
- /* clear the irqstatus for newly enabled irqs */
+ /* clear the irqstatus for irqs that will be enabled */
dispc_k3_clear_irqstatus(dispc, (old_mask ^ mask) & mask);
for (i = 0; i < dispc->feat->num_vps; ++i) {
@@ -862,6 +865,9 @@ static void dispc_k3_set_irqenable(struct dispc_device *dispc,
if (main_disable)
dispc_write(dispc, DISPC_IRQENABLE_CLR, main_disable);
+ /* clear the irqstatus for irqs that were disabled */
+ dispc_k3_clear_irqstatus(dispc, (old_mask ^ mask) & old_mask);
+
/* Flush posted writes */
dispc_read(dispc, DISPC_IRQENABLE_SET);
}
--
2.43.0
Powered by blists - more mailing lists