| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241021211451.GB835676@lichtman.org>
Date: Mon, 21 Oct 2024 21:14:51 +0000
From: Nir Lichtman <nir@...htman.org>
To: kgdb-bugreport@...ts.sourceforge.net,
linux-trace-kernel@...r.kernel.org
Cc: yuran.pereira@...mail.com, jason.wessel@...driver.com,
daniel.thompson@...aro.org, dianders@...omium.org,
rostedt@...dmis.org, mhiramat@...nel.org,
linux-kernel@...r.kernel.org,
linux-kernel-mentees@...ts.linuxfoundation.org
Subject: [PATCH v2 1/2] kdb: Replace the use of simple_strto with safer
kstrto in kdb_main
The simple_str* family of functions perform no error checking in
scenarios where the input value overflows the intended output variable.
This results in these functions successfully returning even when the
output does not match the input string.
Or as it was mentioned [1], "...simple_strtol(), simple_strtoll(),
simple_strtoul(), and simple_strtoull() functions explicitly ignore
overflows, which may lead to unexpected results in callers."
Hence, the use of those functions is discouraged.
This patch replaces all uses of the simple_strto* series of functions
with their safer kstrto* alternatives.
Side effects of this patch:
- Every string to long or long long conversion using kstrto* is now
checked for failure.
- kstrto* errors are handled with appropriate `KDB_BADINT` wherever
applicable.
- A good side effect is that we end up saving a few lines of code
since unlike in simple_strto* functions, kstrto functions do not
need an additional "end pointer" variable, and the return values
of the latter can be directly checked in an "if" statement without
the need to define additional `ret` or `err` variables.
This, of course, results in cleaner, yet still easy to understand
code.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
Signed-off-by: Yuran Pereira <yuran.pereira@...mail.com>
Signed-off-by: Nir Lichtman <nir@...htman.org>
---
kernel/debug/kdb/kdb_main.c | 69 +++++++++----------------------------
1 file changed, 17 insertions(+), 52 deletions(-)
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index f5f7d7fb5936..5f4be507d79f 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -306,8 +306,8 @@ static int kdbgetulenv(const char *match, unsigned long *value)
return KDB_NOTENV;
if (strlen(ep) == 0)
return KDB_NOENVVALUE;
-
- *value = simple_strtoul(ep, NULL, 0);
+ if (kstrtoul(ep, 0, value))
+ return KDB_BADINT;
return 0;
}
@@ -402,42 +402,15 @@ static void kdb_printenv(void)
*/
int kdbgetularg(const char *arg, unsigned long *value)
{
- char *endp;
- unsigned long val;
-
- val = simple_strtoul(arg, &endp, 0);
-
- if (endp == arg) {
- /*
- * Also try base 16, for us folks too lazy to type the
- * leading 0x...
- */
- val = simple_strtoul(arg, &endp, 16);
- if (endp == arg)
- return KDB_BADINT;
- }
-
- *value = val;
-
+ if (kstrtoul(arg, 0, value))
+ return KDB_BADINT;
return 0;
}
int kdbgetu64arg(const char *arg, u64 *value)
{
- char *endp;
- u64 val;
-
- val = simple_strtoull(arg, &endp, 0);
-
- if (endp == arg) {
-
- val = simple_strtoull(arg, &endp, 16);
- if (endp == arg)
- return KDB_BADINT;
- }
-
- *value = val;
-
+ if (kstrtou64(arg, 0, value))
+ return KDB_BADINT;
return 0;
}
@@ -473,10 +446,10 @@ int kdb_set(int argc, const char **argv)
*/
if (strcmp(argv[1], "KDBDEBUG") == 0) {
unsigned int debugflags;
- char *cp;
+ int ret;
- debugflags = simple_strtoul(argv[2], &cp, 0);
- if (cp == argv[2] || debugflags & ~KDB_DEBUG_FLAG_MASK) {
+ ret = kstrtouint(argv[2], 0, &debugflags);
+ if (ret || debugflags & ~KDB_DEBUG_FLAG_MASK) {
kdb_printf("kdb: illegal debug flags '%s'\n",
argv[2]);
return 0;
@@ -1619,10 +1592,10 @@ static int kdb_md(int argc, const char **argv)
if (!argv[0][3])
valid = 1;
else if (argv[0][3] == 'c' && argv[0][4]) {
- char *p;
- repeat = simple_strtoul(argv[0] + 4, &p, 10);
+ if (kstrtouint(argv[0] + 4, 10, &repeat))
+ return KDB_BADINT;
mdcount = ((repeat * bytesperword) + 15) / 16;
- valid = !*p;
+ valid = 1;
}
last_repeat = repeat;
} else if (strcmp(argv[0], "md") == 0)
@@ -2083,15 +2056,10 @@ static int kdb_dmesg(int argc, const char **argv)
if (argc > 2)
return KDB_ARGCOUNT;
if (argc) {
- char *cp;
- lines = simple_strtol(argv[1], &cp, 0);
- if (*cp)
+ if (kstrtoint(argv[1], 0, &lines))
lines = 0;
- if (argc > 1) {
- adjust = simple_strtoul(argv[2], &cp, 0);
- if (*cp || adjust < 0)
- adjust = 0;
- }
+ if (argc > 1 && (kstrtoint(argv[2], 0, &adjust) || adjust < 0))
+ adjust = 0;
}
/* disable LOGGING if set */
@@ -2428,14 +2396,12 @@ static int kdb_help(int argc, const char **argv)
static int kdb_kill(int argc, const char **argv)
{
long sig, pid;
- char *endp;
struct task_struct *p;
if (argc != 2)
return KDB_ARGCOUNT;
- sig = simple_strtol(argv[1], &endp, 0);
- if (*endp)
+ if (kstrtol(argv[1], 0, &sig))
return KDB_BADINT;
if ((sig >= 0) || !valid_signal(-sig)) {
kdb_printf("Invalid signal parameter.<-signal>\n");
@@ -2443,8 +2409,7 @@ static int kdb_kill(int argc, const char **argv)
}
sig = -sig;
- pid = simple_strtol(argv[2], &endp, 0);
- if (*endp)
+ if (kstrtol(argv[2], 0, &pid))
return KDB_BADINT;
if (pid <= 0) {
kdb_printf("Process ID must be large than 0.\n");
--
2.39.2
Powered by blists - more mailing lists