[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241021232114.2636083-4-quic_molvera@quicinc.com>
Date: Mon, 21 Oct 2024 16:21:12 -0700
From: Melody Olvera <quic_molvera@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Lee Jones
<lee@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon
<will@...nel.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
"Dmitry
Baryshkov" <dmitry.baryshkov@...aro.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Neil Armstrong
<neil.armstrong@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
NĂcolas F . R . A . Prado
<nfraprado@...labora.com>,
Stephen Boyd <sboyd@...nel.org>, Trilok Soni
<quic_tsoni@...cinc.com>,
Satya Durga Srinivasu Prabhala
<quic_satyap@...cinc.com>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
Jishnu Prakash <quic_jprakash@...cinc.com>,
Melody Olvera
<quic_molvera@...cinc.com>
Subject: [PATCH 3/5] arm64: dts: qcom: Add pmd8028 and pmih0108 PMIC dtsi files
From: Jishnu Prakash <quic_jprakash@...cinc.com>
Add dtsi files for pmd8028 and pmih0108 PMICs, used on SM8750
platforms.
Signed-off-by: Jishnu Prakash <quic_jprakash@...cinc.com>
Signed-off-by: Melody Olvera <quic_molvera@...cinc.com>
---
arch/arm64/boot/dts/qcom/pmd8028.dtsi | 56 +++++++++++++++++++++++
arch/arm64/boot/dts/qcom/pmih0108.dtsi | 62 ++++++++++++++++++++++++++
2 files changed, 118 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/pmd8028.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/pmih0108.dtsi
diff --git a/arch/arm64/boot/dts/qcom/pmd8028.dtsi b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
new file mode 100644
index 000000000000..f8ef8e133854
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmd8028.dtsi
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pmd8028-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&pmd8028_temp_alarm>;
+
+ trips {
+ pmd8028_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pmd8028_trip1: trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pmd8028: pmic@4 {
+ compatible = "qcom,pmd8028", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmd8028_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmd8028_gpios: gpio@...0 {
+ compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmd8028_gpios 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pmih0108.dtsi b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
new file mode 100644
index 000000000000..c868ebf77213
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pmih0108-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&pmih0108_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+ };
+};
+
+&spmi_bus {
+ pmih0108: pmic@7 {
+ compatible = "qcom,pmih0108", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmih0108_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmih0108_gpios: gpio@...0 {
+ compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmih0108_gpios 0 0 18>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pmih0108_eusb2_repeater: eusb2-repeater@...0 {
+ compatible = "qcom,pm8550b-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.46.1
Powered by blists - more mailing lists