lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241021062732.5592-1-kfting@nuvoton.com>
Date: Mon, 21 Oct 2024 14:27:28 +0800
From: Tyrone Ting <warp5tw@...il.com>
To: avifishman70@...il.com,
	tmaimon77@...il.com,
	tali.perry1@...il.com,
	venture@...gle.com,
	yuenn@...gle.com,
	benjaminfair@...gle.com,
	andi.shyti@...nel.org,
	andriy.shevchenko@...ux.intel.com,
	wsa@...nel.org,
	rand.sec96@...il.com,
	wsa+renesas@...g-engineering.com,
	warp5tw@...il.com,
	tali.perry@...oton.com,
	Avi.Fishman@...oton.com,
	tomer.maimon@...oton.com,
	KWLIU@...oton.com,
	JJLIU0@...oton.com,
	kfting@...oton.com
Cc: openbmc@...ts.ozlabs.org,
	linux-i2c@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v7 0/4] i2c: npcm: read/write operation, checkpatch

This patchset includes the following fixes:

- Enable the target functionality in the interrupt handling routine 
  when the i2c transfer is about to finish.
- Correct the read/write operation procedure.
- Introduce a software flag to handle the bus error (BER) condition
  which is not caused by the i2c transfer.
- Modify timeout calculation.
- Assign the client address earlier logically.
- Use an i2c frequency table for the frequency parameters assignment.
- Coding style fix.

The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.

Addressed comments from:
- Andy Shevchenko : https://lore.kernel.org/lkml/ZwkFWVC3_5xr6OQW
  @smile.fi.intel.com/
- Andy Shevchenko : https://lore.kernel.org/lkml/ZwkFwABviY8ClyUo
  @smile.fi.intel.com/

Changes since version 6:
- Modify code comments.
- Remove redundant code check.
- Remove i2c address mask.

Changes since version 5:
- Correct "EAGAIN" to "-EAGAIN" in the commit message.
- Configure the bus->dest_addr by calling i2c_8bit_addr_from_msg()
  and remove the I2C_M_RD flag when calling i2c_recover_bus().
- Fix the commit message which meets a too small wrapping limit.

Changes since version 4:
- Add more description for the codes.
- Modify the term "function" to "function()" in the commit message
and code comments.

Changes since version 3:
- Remove "Bug fixes" in the cover letter title.
- Modify the term "function" to "func()" in the commit message and
  code comments.
- Correct the coding style.

Changes since version 2:
- Add more explanations in the commit message and code modification.
- Use lower character names for declarations.
- Remove Fixes tags in commits which are not to fix bugs.

Changes since version 1:
- Restore the npcm_i2caddr array length to fix the smatch warning.
- Remove unused variables.
- Handle the condition where scl_table_cnt reaches to the maximum value.
- Fix the checkpatch warning.

Charles Boyer (1):
  i2c: npcm: Enable slave in eob interrupt

Tyrone Ting (3):
  i2c: npcm: Modify timeout evaluation mechanism
  i2c: npcm: Modify the client address assignment
  i2c: npcm: use i2c frequency table

 drivers/i2c/busses/i2c-npcm7xx.c | 424 ++++++++++++++++++++++++-------
 1 file changed, 328 insertions(+), 96 deletions(-)


base-commit: 663bff1ddfe4ecbba3bcf4a74646bb388b1ad5b2
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ