Message-ID: <20241021083702.9734-3-chanh@os.amperecomputing.com>
Date: Mon, 21 Oct 2024 08:37:02 +0000
From: Chanh Nguyen <chanh@...amperecomputing.com>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Joel Stanley <joel@....id.au>,
	Andrew Jeffery <andrew@...econstruct.com.au>,
	devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-aspeed@...ts.ozlabs.org,
	linux-kernel@...r.kernel.org,
	OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
	Open Source Submission <patches@...erecomputing.com>
Cc: Phong Vo <phong@...amperecomputing.com>,
	Thang Nguyen <thang@...amperecomputing.com>,
	Quan Nguyen <quan@...amperecomputing.com>,
	Khanh Pham <khpham@...erecomputing.com>,
	Chanh Nguyen <chanh@...amperecomputing.com>
Subject: [PATCH v2 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC

The Mt. Jefferson BMC is an ASPEED AST2600-based BMC for the Mt. Jefferson
hardware reference platform with AmpereOne(TM)M processor.

Signed-off-by: Chanh Nguyen <chanh@...amperecomputing.com>
---
Changes in v2:
  - Remove the PSU node with pmbus compatible                     [Andrew]
  - Remove clock-names property in mac3 node                      [Andrew]
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../aspeed/aspeed-bmc-ampere-mtjefferson.dts  | 622 ++++++++++++++++++
 2 files changed, 623 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index c4f064e4b073..b1fb0853a789 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-amd-daytonax.dtb \
 	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
 	aspeed-bmc-ampere-mtmitchell.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..c435359a4bd9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@...00000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@...00000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a{
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
-- 
2.43.0

Powered by blists - more mailing lists