| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ZxYcRgnaskQxXT14@dragon>
Date: Mon, 21 Oct 2024 17:17:58 +0800
From: Shawn Guo <shawnguo2@...h.net>
To: Frank Li <Frank.Li@....com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <imx@...ts.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/4] arm64: dts: imx8-ss-hsio: Add PCIe support
On Thu, Oct 03, 2024 at 02:15:37PM -0400, Frank Li wrote:
> From: Richard Zhu <hongxing.zhu@....com>
>
> Add PCIe support for i.MX8QXP, i.MX8QM and i.MX8DXL.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> Change from v1 to v2
> - none
>
> On going discussion:
> https://lore.kernel.org/imx/20240930-pci_fixup_addr-v3-2-80ee70352fc7@nxp.com/
> don't affect this dts.
> This work for with/without above patches.
> ---
> .../boot/dts/freescale/imx8-ss-hsio.dtsi | 123 +++++++++++
> .../boot/dts/freescale/imx8dxl-ss-hsio.dtsi | 52 +++++
> arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 2 +
> .../boot/dts/freescale/imx8qm-ss-hsio.dtsi | 209 ++++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 +
> .../boot/dts/freescale/imx8qxp-ss-hsio.dtsi | 41 ++++
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 +
> 7 files changed, 431 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
> new file mode 100644
> index 0000000000000..bf05cae05d27a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
> @@ -0,0 +1,123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + *
> + * Richard Zhu <hongxing.zhu@....com>
> + */
> +#include <dt-bindings/phy/phy.h>
> +
> +hsio_axi_clk: clock-hsio-axi {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <400000000>;
> + clock-output-names = "hsio_axi_clk";
> +};
> +
> +hsio_per_clk: clock-hsio-per {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <133333333>;
> + clock-output-names = "hsio_per_clk";
> +};
> +
> +hsio_refa_clk: clock-hsio-refa {
> + compatible = "gpio-gate-clock";
> + clocks = <&xtal100m>;
> + #clock-cells = <0>;
> + enable-gpios = <&lsio_gpio4 27 GPIO_ACTIVE_LOW>;
> +};
> +
> +hsio_refb_clk: clock-hsio-refb {
> + compatible = "gpio-gate-clock";
> + clocks = <&xtal100m>;
> + #clock-cells = <0>;
> + enable-gpios = <&lsio_gpio4 1 GPIO_ACTIVE_LOW>;
> +};
> +
> +xtal100m: clock-xtal100m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + clock-output-names = "xtal_100MHz";
> +};
> +
> +hsio_subsys: bus@...00000 {
> + compatible = "simple-bus";
> + ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
> + <0x80000000 0x0 0x70000000 0x10000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + dma-ranges = <0x80000000 0 0x80000000 0x80000000>;
> +
> + pcieb: pcie@...10000 {
> + compatible = "fsl,imx8q-pcie";
> + reg = <0x5f010000 0x10000>,
> + <0x8ff00000 0x80000>;
> + reg-names = "dbi", "config";
> + ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
> + <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
> + #interrupt-cells = <1>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + clocks = <&pcieb_lpcg IMX_LPCG_CLK_6>,
> + <&pcieb_lpcg IMX_LPCG_CLK_4>,
> + <&pcieb_lpcg IMX_LPCG_CLK_5>;
> + clock-names = "dbi", "mstr", "slv";
> + bus-range = <0x00 0xff>;
> + device_type = "pci";
> + fsl,max-link-speed = <3>;
Can we put vendor property after generic ones?
> + interrupt-map = <0 0 0 1 &gic 0 105 4>,
> + <0 0 0 2 &gic 0 106 4>,
> + <0 0 0 3 &gic 0 107 4>,
> + <0 0 0 4 &gic 0 108 4>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + num-lanes = <1>;
> + num-viewport = <4>;
> + power-domains = <&pd IMX_SC_R_PCIE_B>;
> + status = "disabled";
> + };
> +
> + pcieb_lpcg: clock-controller@...60000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f060000 0x10000>;
> + clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
> + clock-output-names = "hsio_pcieb_mstr_axi_clk",
> + "hsio_pcieb_slv_axi_clk",
> + "hsio_pcieb_dbi_axi_clk";
> + power-domains = <&pd IMX_SC_R_PCIE_B>;
> + };
> +
> + phyx1_crr1_lpcg: clock-controller@...b0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0b0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_phyx1_per_clk";
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + };
> +
> + pcieb_crr3_lpcg: clock-controller@...d0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0d0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_pcieb_per_clk";
> + power-domains = <&pd IMX_SC_R_PCIE_B>;
> + };
> +
> + misc_crr5_lpcg: clock-controller@...f0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0f0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_misc_per_clk";
> + power-domains = <&pd IMX_SC_R_HSIO_GPIO>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
> new file mode 100644
> index 0000000000000..f3104e205ae89
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
> @@ -0,0 +1,52 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + */
> +
> +&hsio_subsys {
> + phyx1_lpcg: clock-controller@...90000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f090000 0x10000>;
> + clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
> + <&hsio_per_clk>, <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
> + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_phyx1_pclk",
> + "hsio_phyx1_epcs_tx_clk",
> + "hsio_phyx1_epcs_rx_clk",
> + "hsio_phyx1_apb_clk";
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + };
> +
> + hsio_phy: phy@...a0000 {
> + compatible = "fsl,imx8qxp-hsio";
> + reg = <0x5f1a0000 0x10000>,
> + <0x5f120000 0x10000>,
> + <0x5f140000 0x10000>,
> + <0x5f160000 0x10000>;
> + reg-names = "reg", "phy", "ctrl", "misc";
> + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
> + <&phyx1_lpcg IMX_LPCG_CLK_4>,
> + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
> + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
> + <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
> + "misc_crr";
> + #phy-cells = <3>;
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + status = "disabled";
> + };
> +};
> +
> +&pcieb {
> + #interrupt-cells = <1>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + interrupt-map = <0 0 0 1 &gic 0 47 4>,
> + <0 0 0 2 &gic 0 48 4>,
> + <0 0 0 3 &gic 0 49 4>,
> + <0 0 0 4 &gic 0 50 4>;
> + interrupt-map-mask = <0 0 0 0x7>;
> +};
> +
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> index 7e54cf2028580..76de3db8b9423 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> @@ -237,12 +237,14 @@ xtal24m: clock-xtal24m {
> #include "imx8-ss-conn.dtsi"
> #include "imx8-ss-ddr.dtsi"
> #include "imx8-ss-lsio.dtsi"
> + #include "imx8-ss-hsio.dtsi"
> };
>
> #include "imx8dxl-ss-adma.dtsi"
> #include "imx8dxl-ss-conn.dtsi"
> #include "imx8dxl-ss-lsio.dtsi"
> #include "imx8dxl-ss-ddr.dtsi"
> +#include "imx8dxl-ss-hsio.dtsi"
>
> &cm40_intmux {
> interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
> new file mode 100644
> index 0000000000000..6494f55d33f85
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + * Richard Zhu <hongxing.zhu@....com>
> + */
> +
> +&hsio_subsys {
> + compatible = "simple-bus";
> + ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
> + <0x40000000 0x0 0x60000000 0x10000000>,
> + <0x80000000 0x0 0x70000000 0x10000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pciea: pcie@...00000 {
> + compatible = "fsl,imx8q-pcie";
> + reg = <0x5f000000 0x10000>,
> + <0x4ff00000 0x80000>;
> + reg-names = "dbi", "config";
> + ranges = <0x81000000 0 0x00000000 0x4ff80000 0 0x00010000>,
> + <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>;
> + #interrupt-cells = <1>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + clocks = <&pciea_lpcg 2>,
> + <&pciea_lpcg 0>,
> + <&pciea_lpcg 1>;
> + clock-names = "dbi", "mstr", "slv";
> + bus-range = <0x00 0xff>;
> + device_type = "pci";
> + fsl,max-link-speed = <3>;
> + interrupt-map = <0 0 0 1 &gic 0 73 4>,
> + <0 0 0 2 &gic 0 74 4>,
> + <0 0 0 3 &gic 0 75 4>,
> + <0 0 0 4 &gic 0 76 4>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + num-lanes = <1>;
> + num-viewport = <4>;
> + power-domains = <&pd IMX_SC_R_PCIE_A>;
> + status = "disabled";
> + };
> +
> + pcieb: pcie@...10000 {
> + compatible = "fsl,imx8q-pcie";
> + reg = <0x5f010000 0x10000>,
> + <0x8ff00000 0x80000>;
> + reg-names = "dbi", "config";
> + ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
> + <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
> + #interrupt-cells = <1>;
> + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + clocks = <&pcieb_lpcg 2>,
> + <&pcieb_lpcg 0>,
> + <&pcieb_lpcg 1>;
> + clock-names = "dbi", "mstr", "slv";
> + bus-range = <0x00 0xff>;
> + device_type = "pci";
> + fsl,max-link-speed = <3>;
> + interrupt-map = <0 0 0 1 &gic 0 105 4>,
> + <0 0 0 2 &gic 0 106 4>,
> + <0 0 0 3 &gic 0 107 4>,
> + <0 0 0 4 &gic 0 108 4>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + num-lanes = <1>;
> + num-viewport = <4>;
> + power-domains = <&pd IMX_SC_R_PCIE_B>;
> + status = "disabled";
> + };
> +
> + sata: sata@...20000 {
Not sure why SATA is included in a PCIe change. If it's been done for
some reason, we should probably mention that in commit log.
Shawn
> + compatible = "fsl,imx8qm-ahci";
> + reg = <0x5f020000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sata_lpcg 0>,
> + <&sata_crr4_lpcg 0>;
> + clock-names = "sata", "sata_ref";
> + /*
> + * Since "REXT" pin is only present for first lane PHY
> + * and its calibration result will be stored, and shared
> + * by the PHY used by SATA.
> + *
> + * Add the calibration PHYs for SATA here, although only
> + * the third lane PHY is used by SATA.
> + */
> + phys = <&hsio_phy 2 PHY_TYPE_SATA 0>,
> + <&hsio_phy 0 PHY_TYPE_PCIE 0>,
> + <&hsio_phy 1 PHY_TYPE_PCIE 1>;
> + phy-names = "sata-phy", "cali-phy0", "cali-phy1";
> + power-domains = <&pd IMX_SC_R_SATA_0>;
> + status = "disabled";
> + };
> +
> + pciea_lpcg: clock-controller@...50000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f050000 0x10000>;
> + clocks = <&hsio_axi_clk>, <&hsio_axi_clk>, <&hsio_axi_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_6>;
> + clock-output-names = "hsio_pciea_mstr_axi_clk",
> + "hsio_pciea_slv_axi_clk",
> + "hsio_pciea_dbi_axi_clk";
> + power-domains = <&pd IMX_SC_R_PCIE_A>;
> + };
> +
> + sata_lpcg: clock-controller@...70000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f070000 0x10000>;
> + clocks = <&hsio_axi_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_sata_clk";
> + power-domains = <&pd IMX_SC_R_SATA_0>;
> + };
> +
> + phyx2_lpcg: clock-controller@...80000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f080000 0x10000>;
> + clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
> + <&hsio_refa_clk>, <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
> + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>;
> + clock-output-names = "hsio_phyx2_pclk_0",
> + "hsio_phyx2_pclk_1",
> + "hsio_phyx2_apbclk_0",
> + "hsio_phyx2_apbclk_1";
> + power-domains = <&pd IMX_SC_R_SERDES_0>;
> + };
> +
> + phyx1_lpcg: clock-controller@...90000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f090000 0x10000>;
> + clocks = <&hsio_refa_clk>, <&hsio_per_clk>,
> + <&hsio_per_clk>, <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
> + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_phyx1_pclk",
> + "hsio_phyx1_epcs_tx_clk",
> + "hsio_phyx1_epcs_rx_clk",
> + "hsio_phyx1_apb_clk";
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + };
> +
> + phyx2_crr0_lpcg: clock-controller@...a0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0a0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_phyx2_per_clk";
> + power-domains = <&pd IMX_SC_R_SERDES_0>;
> + };
> +
> + pciea_crr2_lpcg: clock-controller@...c0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0c0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_pciea_per_clk";
> + power-domains = <&pd IMX_SC_R_PCIE_A>;
> + };
> +
> + sata_crr4_lpcg: clock-controller@...e0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f0e0000 0x10000>;
> + clocks = <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_sata_per_clk";
> + power-domains = <&pd IMX_SC_R_SATA_0>;
> + };
> +
> + hsio_phy: phy@...80000 {
> + compatible = "fsl,imx8qm-hsio";
> + reg = <0x5f180000 0x30000>,
> + <0x5f110000 0x20000>,
> + <0x5f130000 0x30000>,
> + <0x5f160000 0x10000>;
> + reg-names = "reg", "phy", "ctrl", "misc";
> + clocks = <&phyx2_lpcg IMX_LPCG_CLK_0>,
> + <&phyx2_lpcg IMX_LPCG_CLK_1>,
> + <&phyx2_lpcg IMX_LPCG_CLK_4>,
> + <&phyx2_lpcg IMX_LPCG_CLK_5>,
> + <&phyx1_lpcg IMX_LPCG_CLK_0>,
> + <&phyx1_lpcg IMX_LPCG_CLK_1>,
> + <&phyx1_lpcg IMX_LPCG_CLK_2>,
> + <&phyx1_lpcg IMX_LPCG_CLK_4>,
> + <&phyx2_crr0_lpcg IMX_LPCG_CLK_4>,
> + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
> + <&pciea_crr2_lpcg IMX_LPCG_CLK_4>,
> + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
> + <&sata_crr4_lpcg IMX_LPCG_CLK_4>,
> + <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "pclk0", "pclk1", "apb_pclk0", "apb_pclk1",
> + "pclk2", "epcs_tx", "epcs_rx", "apb_pclk2",
> + "phy0_crr", "phy1_crr", "ctl0_crr",
> + "ctl1_crr", "ctl2_crr", "misc_crr";
> + #phy-cells = <3>;
> + power-domains = <&pd IMX_SC_R_SERDES_0>, <&pd IMX_SC_R_SERDES_1>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> index 3ee6e2869e3cf..ac9064a949d82 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> @@ -594,6 +594,7 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
> #include "imx8-ss-dma.dtsi"
> #include "imx8-ss-conn.dtsi"
> #include "imx8-ss-lsio.dtsi"
> + #include "imx8-ss-hsio.dtsi"
> };
>
> #include "imx8qm-ss-img.dtsi"
> @@ -603,3 +604,4 @@ mipi_pll_div2_clk: clock-controller-mipi-div2-pll {
> #include "imx8qm-ss-audio.dtsi"
> #include "imx8qm-ss-lvds.dtsi"
> #include "imx8qm-ss-mipi.dtsi"
> +#include "imx8qm-ss-hsio.dtsi"
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
> new file mode 100644
> index 0000000000000..47fc6e0cff4a1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-hsio.dtsi
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2024 NXP
> + * Richard Zhu <hongxing.zhu@....com>
> + */
> +
> +&hsio_subsys {
> + phyx1_lpcg: clock-controller@...90000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5f090000 0x10000>;
> + clocks = <&hsio_refb_clk>, <&hsio_per_clk>,
> + <&hsio_per_clk>, <&hsio_per_clk>;
> + #clock-cells = <1>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>,
> + <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "hsio_phyx1_pclk",
> + "hsio_phyx1_epcs_tx_clk",
> + "hsio_phyx1_epcs_rx_clk",
> + "hsio_phyx1_apb_clk";
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + };
> +
> + hsio_phy: phy@...a0000 {
> + compatible = "fsl,imx8qxp-hsio";
> + reg = <0x5f1a0000 0x10000>,
> + <0x5f120000 0x10000>,
> + <0x5f140000 0x10000>,
> + <0x5f160000 0x10000>;
> + reg-names = "reg", "phy", "ctrl", "misc";
> + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>,
> + <&phyx1_lpcg IMX_LPCG_CLK_1>,
> + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>,
> + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>,
> + <&misc_crr5_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr",
> + "misc_crr";
> + #phy-cells = <3>;
> + power-domains = <&pd IMX_SC_R_SERDES_1>;
> + status = "disabled";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 0313f295de2e9..db21c6d64f24d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -323,6 +323,7 @@ map0 {
> #include "imx8-ss-conn.dtsi"
> #include "imx8-ss-ddr.dtsi"
> #include "imx8-ss-lsio.dtsi"
> + #include "imx8-ss-hsio.dtsi"
> };
>
> #include "imx8qxp-ss-img.dtsi"
> @@ -330,3 +331,4 @@ map0 {
> #include "imx8qxp-ss-adma.dtsi"
> #include "imx8qxp-ss-conn.dtsi"
> #include "imx8qxp-ss-lsio.dtsi"
> +#include "imx8qxp-ss-hsio.dtsi"
> --
> 2.34.1
>
Powered by blists - more mailing lists