[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241022-flagpole-subject-51e68e81e948@spud>
Date: Tue, 22 Oct 2024 18:22:36 +0100
From: Conor Dooley <conor@...nel.org>
To: Angelo Dureghello <adureghello@...libre.com>
Cc: Nuno Sá <nuno.sa@...log.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Olivier Moysan <olivier.moysan@...s.st.com>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, dlechner@...libre.com,
Mark Brown <broonie@...nel.org>
Subject: Re: [PATCH v7 2/8] dt-bindings: iio: dac: adi-axi-dac: add ad3552r
axi variant
On Mon, Oct 21, 2024 at 02:40:12PM +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@...libre.com>
>
> Add a new compatible and related bindigns for the fpga-based
> "ad3552r" AXI IP core, a variant of the generic AXI DAC IP.
>
> The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the
> generic AXI "DAC" IP, intended to control ad3552r and similar chips,
> mainly to reach high speed transfer rates using a QSPI DDR
> (dobule-data-rate) interface.
>
> The ad3552r device is defined as a child of the AXI DAC, that in
> this case is acting as an SPI controller.
>
> Note, #io-backend is present because it is possible (in theory anyway)
> to use a separate controller for the control path than that used
> for the datapath.
>
> Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
> ---
> .../devicetree/bindings/iio/dac/adi,axi-dac.yaml | 69 +++++++++++++++++++++-
> 1 file changed, 66 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> index a55e9bfc66d7..0aabb210f26d 100644
> --- a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
> @@ -19,11 +19,13 @@ description: |
> memory via DMA into the DAC.
>
> https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
> + https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html
>
> properties:
> compatible:
> enum:
> - adi,axi-dac-9.1.b
> + - adi,axi-ad3552r
>
> reg:
> maxItems: 1
> @@ -36,7 +38,12 @@ properties:
> - const: tx
>
> clocks:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + maxItems: 2
>
> '#io-backend-cells':
> const: 0
> @@ -47,7 +54,31 @@ required:
> - reg
> - clocks
>
> -additionalProperties: false
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: adi,axi-ad3552r
> + then:
> + $ref: /schemas/spi/spi-controller.yaml#
> + properties:
> + clocks:
> + minItems: 2
> + maxItems: 2
Is this maxItems required? It matches the outer maximum.
> + clock-names:
> + items:
> + - const: s_axi_aclk
> + - const: dac_clk
The names are the same in both cases, you can move the definitions
outside of the if/then/else stuff and only constrain it here.
> + else:
> + properties:
> + clocks:
> + maxItems: 1
> + clock-names:
> + items:
> + - const: s_axi_aclk
> +
> +unevaluatedProperties: false
>
> examples:
> - |
> @@ -57,6 +88,38 @@ examples:
> dmas = <&tx_dma 0>;
> dma-names = "tx";
> #io-backend-cells = <0>;
> - clocks = <&axi_clk>;
> + clocks = <&clkc 15>;
> + clock-names = "s_axi_aclk";
> + };
> +
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + axi_dac: spi@...70000 {
> + compatible = "adi,axi-ad3552r";
> + reg = <0x44a70000 0x1000>;
> + dmas = <&dac_tx_dma 0>;
> + dma-names = "tx";
> + #io-backend-cells = <0>;
> + clocks = <&clkc 15>, <&ref_clk>;
> + clock-names = "s_axi_aclk", "dac_clk";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dac@0 {
> + compatible = "adi,ad3552r";
> + reg = <0>;
> + reset-gpios = <&gpio0 92 GPIO_ACTIVE_HIGH>;
> + io-backends = <&axi_dac>;
> + spi-max-frequency = <20000000>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + channel@0 {
> + reg = <0>;
> + adi,output-range-microvolt = <(-10000000) (10000000)>;
> + };
> + };
> };
> ...
>
> --
> 2.45.0.rc1
>
Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)
Powered by blists - more mailing lists