[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z9ApObth8AD1gpNO0ppxUmvYW3m0q1dAyqekRhXwVxb9w@mail.gmail.com>
Date: Tue, 22 Oct 2024 10:39:07 -0700
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: E Shattow <e@...eshell.de>, Henry Bell <dmoo_dv@...tonmail.com>
Cc: Emil Renner Berthing <kernel@...il.dk>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] riscv: dts: starfive: Update ethernet phy0 delay
parameter values for Star64
E Shattow wrote:
> Improve function of Star64 bottom network port phy0 with updated delay values.
> Initial upstream patches supporting Star64 use the same vendor board support
> package parameters known to result in an unreliable bottom network port.
>
> Success acquiring DHCP lease and no dropped packets to ping LAN address:
> rx 900: tx 1500 1650 1800 1950
> rx 750: tx 1650 1800 1950
> rx 600: tx 1800 1950
> rx 1050: tx 1650 1800 1950
> rx 1200: tx 1500 1650 1800 1950
> rx 1350: tx 1500 1650 1800 1950
> rx 1500: tx 1500 1650 1800 1950
> rx 1650: tx 1500 1650 1800 1950
> rx 1800: tx 1500 1650 1800 1950
> rx 1900: tx 1950
> rx 1950: tx 1950
>
> Failure acquiring DHCP lease or many dropped packets:
> rx 450: tx 1500 1800 1950
> rx 600: tx 1200 1350 1650
> rx 750: tx 1350 1500
> rx 900: tx 1200 1350
> rx 1050: tx 1050 1200 1350 1500
> rx 1200: tx 1350
> rx 1350: tx 1350
> rx 1500: tx 1200 1350
> rx 1650: tx 1050 1200 1350
> rx 1800: tx 1050 1200 1350
> rx 1900: tx 1500 1650 1800
> rx 1950: tx 1200 1350
>
> Non-functional:
> rx 0: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
> rx 150: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
> rx 300: tx 0 150 300 450 600 750 900 1050 1200 1350 1500 1650 1800 1950
> rx 450: tx 0 150 300 450 600 750 900 1050 1200 1350 1650
> rx 600: tx 0 150 300 450 600 750 900 1050
> rx 750: tx 0 150 300 450 600 750 900 1050 1200
> rx 900: tx 0 150 300 450 600 750 900 1050
> rx 1050: tx 0 150 300 450 600 750 900
> rx 1200: tx 0 150 300 450 600 750 900 1050 1200
> rx 1350: tx 0 150 300 450 600 750 900 1050 1200
> rx 1500: tx 0 150 300 450 600 750 900 1050
> rx 1650: tx 0 150 300 450 600 750 900
> rx 1800: tx 0 150 300 450 600 750 900
> rx 1900: tx 0 150 300 450 600 750 900 1050 1200 1350
> rx 1950: tx 0 150 300 450 600 750 900 1050
>
> Selecting the median of all working rx delay values 1500 combined with tx delay
> values 1500, 1650, 1800, and 1950 only the tx delay value of 1950 (default) is
> reliable as tested in both Linux 6.11.2 and U-Boot v2024.10
>
> Signed-off-by: E Shattow <e@...eshell.de>
Thanks for working this out.
Acked-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
Powered by blists - more mailing lists