lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241022193537.1117919-3-cnsztl@gmail.com>
Date: Wed, 23 Oct 2024 03:35:27 +0800
From: Tianling Shen <cnsztl@...il.com>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Heiko Stuebner <heiko@...ech.de>,
	Chris Morgan <macromorgan@...mail.com>,
	Jonas Karlman <jonas@...boo.se>,
	Andy Yan <andyshrk@....com>,
	Jagan Teki <jagan@...eble.ai>,
	Tianling Shen <cnsztl@...il.com>
Cc: devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH 2/5] arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S

Replace deprecated snps,reset props and move them to the PHY node.

Fixes: 50decd493c83 ("arm64: dts: rockchip: Add FriendlyARM NanoPi R3S board")
Suggested-by: Jonas Karlman <jonas@...boo.se>
Signed-off-by: Tianling Shen <cnsztl@...il.com>
---
 arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
index 6bc17f755b79..66a00cddda0c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts
@@ -149,10 +149,6 @@ &gmac1m0_tx_bus2_level3
 		     &gmac1m0_rx_bus2
 		     &gmac1m0_rgmii_clk_level2
 		     &gmac1m0_rgmii_bus_level3>;
-	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	/* Reset time is 20ms, 100ms for rtl8211f */
-	snps,reset-delays-us = <0 20000 100000>;
 	status = "okay";
 };
 
@@ -414,6 +410,9 @@ rgmii_phy1: ethernet-phy@1 {
 		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&eth_phy_reset_pin>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.47.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ