[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <ZxdOPNe1du9Ho8nm@dragon>
Date: Tue, 22 Oct 2024 15:03:24 +0800
From: Shawn Guo <shawnguo2@...h.net>
To: Tim Harvey <tharvey@...eworks.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/2] arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X
support
On Fri, Oct 18, 2024 at 11:24:46AM -0700, Tim Harvey wrote:
> The Gateworks GW82XX-2X is an ARM based single board computer (SBC)
> comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard
> featuring:
> - i.MX8M Plus SoC
> - LPDDR4 DRAM
> - eMMC FLASH
> - Gateworks System Controller (GSC)
> - microSD (1.8V/3.3V Capable)
> - panel status bi-color LED
> - pushbutton switch
> - fan controller with tachometer
> - USB Type-C connector
> - PCIe switch
> - 2x GbE RJ45 connectors
> - multi-protocol RS232/RS485/RS422 Serial ports
> - 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe
> (for M.2 and miniPCIe expansion)
> - 2x isolated CAN
> - GPS
> - accelerometer
> - magnetometer
> - off-board connectors for: SPI, GPIO, I2C, ADC
> - Wide range DC power input
> - support for 802.3at PoE (via adapter)
>
> Signed-off-by: Tim Harvey <tharvey@...eworks.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../dts/freescale/imx8mp-venice-gw82xx-2x.dts | 19 +
> .../dts/freescale/imx8mp-venice-gw82xx.dtsi | 537 ++++++++++++++++++
> 3 files changed, 557 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 91b72a1d5bb8..d1f205187454 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -196,6 +196,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw75xx-2x.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw82xx-2x.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-ivy.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> new file mode 100644
> index 000000000000..597813308630
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx-2x.dts
> @@ -0,0 +1,19 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 Gateworks Corporation
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mp.dtsi"
> +#include "imx8mp-venice-gw702x.dtsi"
> +#include "imx8mp-venice-gw82xx.dtsi"
> +
> +/ {
> + model = "Gateworks Venice GW82xx-2x i.MX8MP Development Kit";
> + compatible = "gateworks,imx8mp-gw82xx-2x", "fsl,imx8mp";
> +
> + chosen {
> + stdout-path = &uart2;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
> new file mode 100644
> index 000000000000..83e7dada92f6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw82xx.dtsi
> @@ -0,0 +1,537 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2024 Gateworks Corporation
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/phy/phy-imx8-pcie.h>
> +
> +/ {
> + aliases {
> + ethernet1 = ð1;
> + fsa1 = &fsa0;
> + fsa2 = &fsa1;
> + };
> +
> + led-controller {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio_leds>;
> +
> + led-0 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
> + default-state = "on";
> + linux,default-trigger = "heartbeat";
> + };
> +
> + led-1 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> + };
> +
> + pcie0_refclk: clock-pcie0 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <100000000>;
> + };
> +
> + pps {
> + compatible = "pps-gpio";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pps>;
> + gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reg_usb2_vbus: regulator-usb2 {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_reg_usb2_en>;
> + regulator-name = "usb2_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
> + regulator-name = "VDD_3V3_SD";
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + gpio = <&gpio2 19 0>; /* SD2_RESET */
Could you use GPIO_ACTIVE_HIGH?
> + enable-active-high;
> + off-on-delay-us = <12000>;
> + startup-delay-us = <100>;
> + };
> +};
> +
> +&ecspi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi2>;
> + cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>, /* CS0 onboard TPM */
> + <&gpio5 13 GPIO_ACTIVE_LOW>, /* CS1 off-board J32 SPI */
> + <&gpio1 12 GPIO_ACTIVE_LOW>, /* CS3 off-board J52 FSA1 */
> + <&gpio4 26 GPIO_ACTIVE_LOW>; /* CS2 off-board J51 FSA2 */
> + status = "okay";
> +
> + tpm@0 {
> + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
> + reg = <0x0>;
> + spi-max-frequency = <10000000>;
> + };
> +};
> +
> +&flexcan1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can1>;
> + status = "okay";
> +};
> +
> +&flexcan2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_can2>;
> + status = "okay";
> +};
> +
> +&gpio1 {
> + gpio-line-names =
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "fsa2_gpio1", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "", "";
> +};
> +
> +&gpio4 {
> + gpio-line-names =
> + "", "", "", "",
> + "", "", "", "",
> + "dio1", "fsa1_gpio2", "", "dio0",
> + "", "", "", "",
> + "", "", "", "",
> + "", "", "rs485_en", "rs485_term",
> + "fsa2_gpio2", "fsa1_gpio1", "", "rs485_half",
> + "", "", "", "";
> +};
> +
> +&i2c2 {
> + accelerometer@19 {
> + compatible = "st,lis2de12";
> + reg = <0x19>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_accel>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
> + st,drdy-int-pin = <1>;
> + };
> +
> + magnetometer@1e {
> + compatible = "st,lis2mdl";
> + reg = <0x1e>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mag>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> + st,drdy-int-pin = <1>;
Could you check Rob's bot warning?
Shawn
> + };
> +};
> +
> +&i2c3 {
> + i2c-mux@70 {
> + compatible = "nxp,pca9548";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* J30 */
> + fsa1: i2c@0 {
> + reg = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsa2i2c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + eeprom@54 {
> + compatible = "atmel,24c02";
> + reg = <0x54>;
> + pagesize = <16>;
> + };
> +
> + eeprom@55 {
> + compatible = "atmel,24c02";
> + reg = <0x55>;
> + pagesize = <16>;
> + };
> + };
> +
> + /* J29 */
> + fsa0: i2c@1 {
> + reg = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fsa1i2c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + interrupt-parent = <&gpio4>;
> + interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + eeprom@54 {
> + compatible = "atmel,24c02";
> + reg = <0x54>;
> + pagesize = <16>;
> + };
> +
> + eeprom@55 {
> + compatible = "atmel,24c02";
> + reg = <0x55>;
> + pagesize = <16>;
> + };
> + };
> +
> + /* J33 */
> + i2c@2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&pcie_phy {
> + clocks = <&pcie0_refclk>;
> + clock-names = "ref";
> + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> + fsl,clkreq-unsupported;
> + status = "okay";
> +};
> +
> +&pcie {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pcie0>;
> + reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +
> + pcie@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + pcie@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + pcie@7,0 {
> + reg = <0x3800 0 0 0 0>;
> + device_type = "pci";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> +
> + eth1: ethernet@0,0 {
> + reg = <0x0000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges;
> + local-mac-address = [00 00 00 00 00 00];
> + };
> + };
> + };
> + };
> +};
> +
> +/* GPS */
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> + status = "okay";
> +};
> +
> +/* RS232 */
> +&uart4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart4>;
> + status = "okay";
> +};
> +
> +/* USB1 - FSA1 */
> +&usb3_0 {
> + fsl,permanently-attached;
> + fsl,disable-port-power-control;
> + status = "okay";
> +};
> +
> +&usb3_phy0 {
> + status = "okay";
> +};
> +
> +&usb_dwc3_0 {
> + adp-disable;
> + hnp-disable;
> + srp-disable;
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +/* USB2 - USB3.0 Hub */
> +&usb3_1 {
> + fsl,permanently-attached;
> + fsl,disable-port-power-control;
> + status = "okay";
> +};
> +
> +&usb3_phy1 {
> + vbus-supply = <®_usb2_vbus>;
> + status = "okay";
> +};
> +
> +&usb_dwc3_1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +/* SDIO 1.8V */
> +&usdhc1 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> + pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> + bus-width = <4>;
> + non-removable;
> + status = "okay";
> +};
> +
> +/* microSD */
> +&usdhc2 {
> + pinctrl-names = "default", "state_100mhz", "state_200mhz";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
> + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
> + cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; /* CD is active high */
> + bus-width = <4>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
> + MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
> + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */
> + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */
> + MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */
> + >;
> + };
> +
> + pinctrl_accel: accelgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ# */
> + >;
> + };
> +
> + pinctrl_can1: can1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
> + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
> + >;
> + };
> +
> + pinctrl_can2: can2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
> + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
> + >;
> + };
> +
> + pinctrl_gpio_leds: gpioledgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
> + MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
> + >;
> + };
> +
> + pinctrl_fsa1i2c: fsa1i2cgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x1d0 /* FSA1_ALERT# */
> + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x400001d0 /* FSA1_GPIO1 */
> + MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x400001d0 /* FSA1_GPIO2 */
> + >;
> + };
> +
> + pinctrl_fsa2i2c: fsa2i2cgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x1d0 /* FSA2_ALERT# */
> + MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x400001d0 /* FSA2_GPIO1 */
> + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x400001d0 /* FSA2_GPIO2 */
> + >;
> + };
> +
> + pinctrl_mag: maggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x140 /* IRQ# */
> + >;
> + };
> +
> + pinctrl_pcie0: pcie0grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 /* PERST# */
> + >;
> + };
> +
> + pinctrl_pps: ppsgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
> + >;
> + };
> +
> + pinctrl_reg_usb2_en: regusb2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */
> + >;
> + };
> +
> + pinctrl_spi2: spi2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0xd0
> + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0xd0
> + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0xd0
> + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 /* J32_CS */
> + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 /* TPM_CS */
> + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140 /* FSA1_CS */
> + MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x140 /* FSA2_CS */
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
> + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_uart4: uart4grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
> + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
> + >;
> + };
> +
> + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
> + MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
> + MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
> + MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
> + MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
> + MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
> + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
> + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
> + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
> + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
> + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
> + MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
> + >;
> + };
> +
> + pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x1d0
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
> + >;
> + };
> +};
> --
> 2.25.1
>
Powered by blists - more mailing lists