[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <dd008ff5-ee2a-47be-8a5b-d4f3a1e2bac3@kernel.org>
Date: Tue, 22 Oct 2024 14:27:32 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Janaki Ramaiah Thota <quic_janathot@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: quic_mohamull@...cinc.com, quic_hbandi@...cinc.com,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
On 22/10/2024 12:46, Janaki Ramaiah Thota wrote:
> Add Bluetooth and UART7 support for qcs6490-rb3gen2.
>
> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 122 ++++++++++++++++++-
> 1 file changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 0d45662b8028..b774d89172ea 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: BSD-3-Clause
> /*
> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
> @@ -31,7 +31,9 @@
> chassis-type = "embedded";
>
> aliases {
> + bluetooth0 = &bluetooth;
Which driver uses this alias?
> serial0 = &uart5;
> + serial1 = &uart7;
> };
...
> };
>
> &uart5 {
> status = "okay";
> };
>
> +&uart7 {
> + status = "okay";
> + /delete-property/interrupts;
> + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
> + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>,
> + <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
This could be just one phandle to state node with multiple pins subnode.
> +
> + bluetooth: bluetooth {
> + compatible = "qcom,wcn6750-bt";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_en>, <&sw_ctrl>;
> + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
> + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
> + vddaon-supply = <&vreg_s7b_0p972>;
> + vddbtcxmx-supply = <&vreg_s7b_0p972>;
> + vddrfacmn-supply = <&vreg_s7b_0p972>;
> + vddrfa0p8-supply = <&vreg_s7b_0p972>;
> + vddrfa1p7-supply = <&vreg_s1b_1p872>;
> + vddrfa1p2-supply = <&vreg_s8b_1p272>;
> + vddrfa2p2-supply = <&vreg_s1c_2p19>;
> + vddasd-supply = <&vreg_l11c_2p8>;
> + max-speed = <3200000>;
There were warnings in the past. Please confirm that you addressed them
and this is warning free.
Best regards,
Krzysztof
Powered by blists - more mailing lists