[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <67192d40.5d0a0220.33f6c1.23bc@mx.google.com>
Date: Wed, 23 Oct 2024 19:07:08 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [net-next RFC PATCH v2 3/3] net: phy: Add Airoha AN8855 Internal
Switch Gigabit PHY
On Wed, Oct 23, 2024 at 07:00:22PM +0200, Andrew Lunn wrote:
> > +static int an8855_config_init(struct phy_device *phydev)
> > +{
> > + struct air_an8855_priv *priv = phydev->priv;
> > + int ret;
> > +
> > + /* Enable HW auto downshift */
> > + ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_EXT_PAGE);
> > + if (ret)
> > + return ret;
> > + ret = phy_set_bits(phydev, AN8855_PHY_EXT_REG_14,
> > + AN8855_PHY_EN_DOWN_SHFIT);
> > + if (ret)
> > + return ret;
> > + ret = phy_write(phydev, AN8855_PHY_PAGE_CTRL, AN8855_PHY_NORMAL_PAGE);
> > + if (ret)
> > + return ret;
>
> There are locking issues here, which is why we have the helpers
> phy_select_page() and phy_restore_page(). The air_en8811h.c gets this
> right.
Ugh didn't think about it... The switch address is shared with the PHY
so yes this is a problem.
Consider that this page thing comes from my speculation... Not really
use if 1f select page...
>From what I observed
0x0 PHY page
0x1 this strange EXT
0x4 acess switch register (every PHY can access the switch)
>
> Is there anything in common with the en8811h? Does it also support
> downshift? Can its LED code be used here?
>
For some reason part of the LED are controlled by the switch and some
are by the PHY. I still have to investigate that (not giving priority to
it... just on my todo)
For downshift as you notice it's a single bit with no count...
>From their comments in the original driver it's said "Enable HW
autodownshift"
Trying to reach them but currently it's all very obscure.
--
Ansuel
Powered by blists - more mailing lists