[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJD7tkZnEp98A+bP4N8GvFn=vT5Ck4NgrqsFQn+V8gpSbyAzkg@mail.gmail.com>
Date: Tue, 22 Oct 2024 17:53:11 -0700
From: Yosry Ahmed <yosryahmed@...gle.com>
To: Kanchana P Sridhar <kanchana.p.sridhar@...el.com>
Cc: linux-kernel@...r.kernel.org, linux-mm@...ck.org, hannes@...xchg.org,
nphamcs@...il.com, chengming.zhou@...ux.dev, usamaarif642@...il.com,
ryan.roberts@....com, ying.huang@...el.com, 21cnbao@...il.com,
akpm@...ux-foundation.org, linux-crypto@...r.kernel.org,
herbert@...dor.apana.org.au, davem@...emloft.net, clabbe@...libre.com,
ardb@...nel.org, ebiggers@...gle.com, surenb@...gle.com,
kristen.c.accardi@...el.com, zanussi@...nel.org, viro@...iv.linux.org.uk,
brauner@...nel.org, jack@...e.cz, mcgrof@...nel.org, kees@...nel.org,
joel.granados@...nel.org, bfoster@...hat.com, willy@...radead.org,
linux-fsdevel@...r.kernel.org, wajdi.k.feghali@...el.com,
vinodh.gopal@...el.com
Subject: Re: [RFC PATCH v1 11/13] mm: swap: Add IAA batch compression API swap_crypto_acomp_compress_batch().
On Thu, Oct 17, 2024 at 11:41 PM Kanchana P Sridhar
<kanchana.p.sridhar@...el.com> wrote:
>
> Added a new API swap_crypto_acomp_compress_batch() that does batch
> compression. A system that has Intel IAA can avail of this API to submit a
> batch of compress jobs for parallel compression in the hardware, to improve
> performance. On a system without IAA, this API will process each compress
> job sequentially.
>
> The purpose of this API is to be invocable from any swap module that needs
> to compress large folios, or a batch of pages in the general case. For
> instance, zswap would batch compress up to SWAP_CRYPTO_SUB_BATCH_SIZE
> (i.e. 8 if the system has IAA) pages in the large folio in parallel to
> improve zswap_store() performance.
>
> Towards this eventual goal:
>
> 1) The definition of "struct crypto_acomp_ctx" is moved to mm/swap.h
> so that mm modules like swap_state.c and zswap.c can reference it.
> 2) The swap_crypto_acomp_compress_batch() interface is implemented in
> swap_state.c.
>
> It would be preferable for "struct crypto_acomp_ctx" to be defined in,
> and for swap_crypto_acomp_compress_batch() to be exported via
> include/linux/swap.h so that modules outside mm (for e.g. zram) can
> potentially use the API for batch compressions with IAA. I would
> appreciate RFC comments on this.
Same question as the last patch, why does this need to be in the swap
code? Why can't zswap just submit a single request to compress a large
folio or a range of contiguous subpages at once?
>
> Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@...el.com>
> ---
> mm/swap.h | 45 +++++++++++++++++++
> mm/swap_state.c | 115 ++++++++++++++++++++++++++++++++++++++++++++++++
> mm/zswap.c | 9 ----
> 3 files changed, 160 insertions(+), 9 deletions(-)
>
> diff --git a/mm/swap.h b/mm/swap.h
> index 566616c971d4..4dcb67e2cc33 100644
> --- a/mm/swap.h
> +++ b/mm/swap.h
> @@ -7,6 +7,7 @@ struct mempolicy;
> #ifdef CONFIG_SWAP
> #include <linux/swapops.h> /* for swp_offset */
> #include <linux/blk_types.h> /* for bio_end_io_t */
> +#include <linux/crypto.h>
>
> /*
> * For IAA compression batching:
> @@ -19,6 +20,39 @@ struct mempolicy;
> #define SWAP_CRYPTO_SUB_BATCH_SIZE 1UL
> #endif
>
> +/* linux/mm/swap_state.c, zswap.c */
> +struct crypto_acomp_ctx {
> + struct crypto_acomp *acomp;
> + struct acomp_req *req[SWAP_CRYPTO_SUB_BATCH_SIZE];
> + u8 *buffer[SWAP_CRYPTO_SUB_BATCH_SIZE];
> + struct crypto_wait wait;
> + struct mutex mutex;
> + bool is_sleepable;
> +};
> +
> +/**
> + * This API provides IAA compress batching functionality for use by swap
> + * modules.
> + * The acomp_ctx mutex should be locked/unlocked before/after calling this
> + * procedure.
> + *
> + * @pages: Pages to be compressed.
> + * @dsts: Pre-allocated destination buffers to store results of IAA compression.
> + * @dlens: Will contain the compressed lengths.
> + * @errors: Will contain a 0 if the page was successfully compressed, or a
> + * non-0 error value to be processed by the calling function.
> + * @nr_pages: The number of pages, up to SWAP_CRYPTO_SUB_BATCH_SIZE,
> + * to be compressed.
> + * @acomp_ctx: The acomp context for iaa_crypto/other compressor.
> + */
> +void swap_crypto_acomp_compress_batch(
> + struct page *pages[],
> + u8 *dsts[],
> + unsigned int dlens[],
> + int errors[],
> + int nr_pages,
> + struct crypto_acomp_ctx *acomp_ctx);
> +
> /* linux/mm/page_io.c */
> int sio_pool_init(void);
> struct swap_iocb;
> @@ -119,6 +153,17 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
>
> #else /* CONFIG_SWAP */
> struct swap_iocb;
> +struct crypto_acomp_ctx {};
> +static inline void swap_crypto_acomp_compress_batch(
> + struct page *pages[],
> + u8 *dsts[],
> + unsigned int dlens[],
> + int errors[],
> + int nr_pages,
> + struct crypto_acomp_ctx *acomp_ctx)
> +{
> +}
> +
> static inline void swap_read_folio(struct folio *folio, struct swap_iocb **plug)
> {
> }
> diff --git a/mm/swap_state.c b/mm/swap_state.c
> index 4669f29cf555..117c3caa5679 100644
> --- a/mm/swap_state.c
> +++ b/mm/swap_state.c
> @@ -23,6 +23,8 @@
> #include <linux/swap_slots.h>
> #include <linux/huge_mm.h>
> #include <linux/shmem_fs.h>
> +#include <linux/scatterlist.h>
> +#include <crypto/acompress.h>
> #include "internal.h"
> #include "swap.h"
>
> @@ -742,6 +744,119 @@ void exit_swap_address_space(unsigned int type)
> swapper_spaces[type] = NULL;
> }
>
> +#ifdef CONFIG_SWAP
> +
> +/**
> + * This API provides IAA compress batching functionality for use by swap
> + * modules.
> + * The acomp_ctx mutex should be locked/unlocked before/after calling this
> + * procedure.
> + *
> + * @pages: Pages to be compressed.
> + * @dsts: Pre-allocated destination buffers to store results of IAA compression.
> + * @dlens: Will contain the compressed lengths.
> + * @errors: Will contain a 0 if the page was successfully compressed, or a
> + * non-0 error value to be processed by the calling function.
> + * @nr_pages: The number of pages, up to SWAP_CRYPTO_SUB_BATCH_SIZE,
> + * to be compressed.
> + * @acomp_ctx: The acomp context for iaa_crypto/other compressor.
> + */
> +void swap_crypto_acomp_compress_batch(
> + struct page *pages[],
> + u8 *dsts[],
> + unsigned int dlens[],
> + int errors[],
> + int nr_pages,
> + struct crypto_acomp_ctx *acomp_ctx)
> +{
> + struct scatterlist inputs[SWAP_CRYPTO_SUB_BATCH_SIZE];
> + struct scatterlist outputs[SWAP_CRYPTO_SUB_BATCH_SIZE];
> + bool compressions_done = false;
> + int i, j;
> +
> + BUG_ON(nr_pages > SWAP_CRYPTO_SUB_BATCH_SIZE);
> +
> + /*
> + * Prepare and submit acomp_reqs to IAA.
> + * IAA will process these compress jobs in parallel in async mode.
> + * If the compressor does not support a poll() method, or if IAA is
> + * used in sync mode, the jobs will be processed sequentially using
> + * acomp_ctx->req[0] and acomp_ctx->wait.
> + */
> + for (i = 0; i < nr_pages; ++i) {
> + j = acomp_ctx->acomp->poll ? i : 0;
> + sg_init_table(&inputs[i], 1);
> + sg_set_page(&inputs[i], pages[i], PAGE_SIZE, 0);
> +
> + /*
> + * Each acomp_ctx->buffer[] is of size (PAGE_SIZE * 2).
> + * Reflect same in sg_list.
> + */
> + sg_init_one(&outputs[i], dsts[i], PAGE_SIZE * 2);
> + acomp_request_set_params(acomp_ctx->req[j], &inputs[i],
> + &outputs[i], PAGE_SIZE, dlens[i]);
> +
> + /*
> + * If the crypto_acomp provides an asynchronous poll()
> + * interface, submit the request to the driver now, and poll for
> + * a completion status later, after all descriptors have been
> + * submitted. If the crypto_acomp does not provide a poll()
> + * interface, submit the request and wait for it to complete,
> + * i.e., synchronously, before moving on to the next request.
> + */
> + if (acomp_ctx->acomp->poll) {
> + errors[i] = crypto_acomp_compress(acomp_ctx->req[j]);
> +
> + if (errors[i] != -EINPROGRESS)
> + errors[i] = -EINVAL;
> + else
> + errors[i] = -EAGAIN;
> + } else {
> + errors[i] = crypto_wait_req(
> + crypto_acomp_compress(acomp_ctx->req[j]),
> + &acomp_ctx->wait);
> + if (!errors[i])
> + dlens[i] = acomp_ctx->req[j]->dlen;
> + }
> + }
> +
> + /*
> + * If not doing async compressions, the batch has been processed at
> + * this point and we can return.
> + */
> + if (!acomp_ctx->acomp->poll)
> + return;
> +
> + /*
> + * Poll for and process IAA compress job completions
> + * in out-of-order manner.
> + */
> + while (!compressions_done) {
> + compressions_done = true;
> +
> + for (i = 0; i < nr_pages; ++i) {
> + /*
> + * Skip, if the compression has already completed
> + * successfully or with an error.
> + */
> + if (errors[i] != -EAGAIN)
> + continue;
> +
> + errors[i] = crypto_acomp_poll(acomp_ctx->req[i]);
> +
> + if (errors[i]) {
> + if (errors[i] == -EAGAIN)
> + compressions_done = false;
> + } else {
> + dlens[i] = acomp_ctx->req[i]->dlen;
> + }
> + }
> + }
> +}
> +EXPORT_SYMBOL_GPL(swap_crypto_acomp_compress_batch);
> +
> +#endif /* CONFIG_SWAP */
> +
> static int swap_vma_ra_win(struct vm_fault *vmf, unsigned long *start,
> unsigned long *end)
> {
> diff --git a/mm/zswap.c b/mm/zswap.c
> index 579869d1bdf6..cab3114321f9 100644
> --- a/mm/zswap.c
> +++ b/mm/zswap.c
> @@ -150,15 +150,6 @@ bool zswap_never_enabled(void)
> * data structures
> **********************************/
>
> -struct crypto_acomp_ctx {
> - struct crypto_acomp *acomp;
> - struct acomp_req *req[SWAP_CRYPTO_SUB_BATCH_SIZE];
> - u8 *buffer[SWAP_CRYPTO_SUB_BATCH_SIZE];
> - struct crypto_wait wait;
> - struct mutex mutex;
> - bool is_sleepable;
> -};
> -
> /*
> * The lock ordering is zswap_tree.lock -> zswap_pool.lru_lock.
> * The only case where lru_lock is not acquired while holding tree.lock is
> --
> 2.27.0
>
Powered by blists - more mailing lists