linux-kernel - [PATCH v4 1/3] dt-bindings: display/xlnx/zynqmp-dpsub: Add audio DMAs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241023-xilinx-dp-audio-v4-1-5128881457be@ideasonboard.com>
Date: Wed, 23 Oct 2024 14:52:41 +0300
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Lars-Peter Clausen <lars@...afoo.de>, Jaroslav Kysela <perex@...ex.cz>, 
 Takashi Iwai <tiwai@...e.com>, Liam Girdwood <lgirdwood@...il.com>, 
 Mark Brown <broonie@...nel.org>, 
 Laurent Pinchart <laurent.pinchart@...asonboard.com>, 
 Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>, 
 Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>, 
 David Airlie <airlied@...il.com>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>, Michal Simek <michal.simek@....com>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Simona Vetter <simona.vetter@...ll.ch>
Cc: linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org, 
 dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, Vishal Sagar <vishal.sagar@....com>, 
 Anatoliy Klymenko <anatoliy.klymenko@....com>, 
 Péter Ujfalusi <peter.ujfalusi@...il.com>, 
 Markus Elfring <Markus.Elfring@....de>, 
 Tomi Valkeinen <tomi.valkeinen@...asonboard.com>, 
 "Rob Herring (Arm)" <robh@...nel.org>
Subject: [PATCH v4 1/3] dt-bindings: display/xlnx/zynqmp-dpsub: Add audio
 DMAs

The DP subsystem for ZynqMP supports audio via two channels, and the DP
DMA has dma-engines for those channels. For some reason the DT binding
has not specified those channels, even if the picture included in
xlnx,zynqmp-dpsub.yaml shows "2 x aud" DMAs.

This hasn't caused any issues as the drivers have not supported audio,
and has thus gone unnoticed.

To make it possible to add the audio support to the driver, add the two
audio DMAs to the binding. While strictly speaking this is an ABI break,
there should be no regressions caused by this as we're adding new
entries at the end of the dmas list, and, after the audio support has
been added in "arm64: dts: zynqmp: Add DMA for DP audio",  the driver
will treat the audio DMAs as optional to also support the old bindings.

Reviewed-by: Rob Herring (Arm) <robh@...nel.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
 .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml    | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
index 554f9d5809d4..6b754d4f260e 100644
--- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -100,12 +100,16 @@ properties:
       - description: Video layer, plane 1 (U/V or U)
       - description: Video layer, plane 2 (V)
       - description: Graphics layer
+      - description: Audio channel 0
+      - description: Audio channel 1
   dma-names:
     items:
       - const: vid0
       - const: vid1
       - const: vid2
       - const: gfx0
+      - const: aud0
+      - const: aud1
 
   phys:
     description: PHYs for the DP data lanes
@@ -194,11 +198,13 @@ examples:
         power-domains = <&pd_dp>;
         resets = <&reset ZYNQMP_RESET_DP>;
 
-        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dma-names = "vid0", "vid1", "vid2", "gfx0", "aud0", "aud1";
         dmas = <&xlnx_dpdma 0>,
                <&xlnx_dpdma 1>,
                <&xlnx_dpdma 2>,
-               <&xlnx_dpdma 3>;
+               <&xlnx_dpdma 3>,
+               <&xlnx_dpdma 4>,
+               <&xlnx_dpdma 5>;
 
         phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
                <&psgtr 0 PHY_TYPE_DP 1 3>;

-- 
2.43.0