| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f979aff2-34f4-4f6d-bb9a-03a02afc4635@notapiano>
Date: Wed, 23 Oct 2024 09:58:35 -0400
From: Nícolas F. R. A. Prado <nfraprado@...labora.com>
To: Jon Hunter <jonathanh@...dia.com>
Cc: Saravana Kannan <saravanak@...gle.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J . Wysocki" <rafael@...nel.org>,
linux-kernel@...r.kernel.org, linux-tegra@...r.kernel.org
Subject: Re: [PATCH] driver core: Don't try to create links if they are not
needed
On Wed, Oct 23, 2024 at 02:24:52PM +0100, Jon Hunter wrote:
>
> On 23/10/2024 02:00, Saravana Kannan wrote:
> > On Thu, Oct 3, 2024 at 7:59 AM Nícolas F. R. A. Prado
> > <nfraprado@...labora.com> wrote:
> > >
> > > On Thu, Oct 03, 2024 at 11:25:22AM +0100, Jon Hunter wrote:
> > > >
> > > > On 02/10/2024 21:38, Saravana Kannan wrote:
> > > > > On Wed, Oct 2, 2024 at 11:30 AM Jon Hunter <jonathanh@...dia.com> wrote:
> > > > > >
> > > > > > Hi Greg,
> > > > > >
> > > > > > On 16/09/2024 18:49, Greg Kroah-Hartman wrote:
> > > > > > > On Mon, Sep 16, 2024 at 03:50:34PM +0100, Jon Hunter wrote:
> > > > > > > >
> > > > > > > > On 11/09/2024 15:32, Greg Kroah-Hartman wrote:
> > > > > > > > > On Tue, Sep 10, 2024 at 02:00:19PM +0100, Jon Hunter wrote:
> > > > > > > > > > The following error messages are observed on boot with the Tegra234
> > > > > > > > > > Jetson AGX Orin board ...
> > > > > > > > > >
> > > > > > > > > > tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180)
> > > > > > > > > > with 1-0008
> > > > > > > > > > tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180)
> > > > > > > > > > with 1-0008
> > > > > > > > > > tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180)
> > > > > > > > > > with 1-0008
> > > > > > > > > >
> > > > > > > > > > In the above case, device_link_add() intentionally returns NULL because
> > > > > > > > > > these are SYNC_STATE_ONLY links and the device is already probed.
> > > > > > > > > > Therefore, the above messages are not actually errors. Fix this by
> > > > > > > > > > replicating the test from device_link_add() in the function
> > > > > > > > > > fw_devlink_create_devlink() and don't call device_link_add() if there
> > > > > > > > > > are no links to create.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Jon Hunter <jonathanh@...dia.com>
> > > > > > > > >
> > > > > > > > > What commit id does this fix?
> > > > > > > >
> > > > > > > >
> > > > > > > > Hard to say exactly. The above error message was first added with commit
> > > > > > > > 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
> > > > > > > > but at this time we did not have the support in place for Tegra234 USB. I am
> > > > > > > > guessing we first started seeing this when I enabled support for the type-c
> > > > > > > > controller in commit 16744314ee57 ("arm64: tegra: Populate USB Type-C
> > > > > > > > Controller for Jetson AGX Orin"). I can confirm if that is helpful?
> > > > > > > >
> > > > > > >
> > > > > > > That helps, I'll look at this after -rc1 is out, thanks!
> > > > > >
> > > > > >
> > > > > > Let me know if there is anything else I can answer on this one.
> > > > >
> > > > > Hi Jon,
> > > > >
> > > > > See this.
> > > > > https://lore.kernel.org/all/c622df86-0372-450e-b3dd-ab93cd051d6f@notapiano/
> > > > >
> > > > > Ignore my point 1. My point 2 still stands. I got busy and forgot to
> > > > > reply to Nícolas.
> > > > >
> > > > > I'm fine with either one of your patches as long as we define a
> > > > > "useless link" function and use it in all the places.
> > > >
> > > >
> > > > Thanks! Yes I am also fine with Nicolas' fix too. I quite like the dev_dbg()
> > > > in Nicolas' version. I was wondering if we should define a function for this
> > > > check too.
> > > >
> > > > Nicolas do you want to update your patch with a 'useless link' function? I
> > > > will be happy to test on my side. Looks like you identified the exact patch
> > > > that introduced this and have the appropriate fixes tag too.
> > >
> > > Hi Jon,
> > >
> > > I just sent a reply to that thread yesterday going a bit further down the rabbit
> > > hole to try and answer if there's an underlying issue there that the log
> > > messages are just exposing, but I still don't understand all the devlink details
> > > involved so was hoping for some feedback from Saravana.
> > >
> > > But if there's no feedback I can surely update the patch with the commonized
> > > function to fix the immediate problem. I'll wait a couple days to give Saravana
> > > (and others) some time to respond.
> >
> > Finally managed to squeeze in some time for Nicolas's issue. It was a
> > real issue. Replied to the original thread from Nicolas.
> >
> > Jon, can you do an analysis similar to Nicolas? What consumer node did
> > fw_devlink try to create a link for and what consumer device did it
> > end up creating a device link with instead?
>
>
> I am not 100% sure what you want, but enabling the same debug messages
> as Nicolas I am seeing ...
>
> [ 9.867969] i2c 3-0008: bus: 'i2c': __driver_probe_device: matched device with driver ucsi_ccg
> [ 9.868004] i2c 3-0008: bus: 'i2c': really_probe: probing driver ucsi_ccg with device
> [ 9.898834] ucsi_ccg 3-0008: driver: 'ucsi_ccg': driver_bound: bound to device
> [ 9.898845] /bus@...adctl@...0000/ports/usb3-0 Linked as a fwnode consumer to /bus@...2c@...0000/typec@8
> [ 9.898858] /bus@...adctl@...0000/ports/usb3-0 Dropping the fwnode link to /bus@...2c@...0000/typec@...onnector@0
> [ 9.898871] /bus@...adctl@...0000/ports/usb2-1 Linked as a fwnode consumer to /bus@...2c@...0000/typec@8
> [ 9.898881] /bus@...adctl@...0000/ports/usb2-1 Dropping the fwnode link to /bus@...2c@...0000/typec@...onnector@0
> [ 9.898893] /bus@...adctl@...0000/ports/usb3-1 Linked as a fwnode consumer to /bus@...2c@...0000/typec@8
> [ 9.898899] /bus@...adctl@...0000/ports/usb3-1 Dropping the fwnode link to /bus@...2c@...0000/typec@...onnector@1
> [ 9.898905] /bus@...adctl@...0000/ports/usb2-0 Linked as a fwnode consumer to /bus@...2c@...0000/typec@8
> [ 9.898910] /bus@...adctl@...0000/ports/usb2-0 Dropping the fwnode link to /bus@...2c@...0000/typec@...onnector@1
> [ 9.898923] device: 'i2c:3-0008--usb_role:usb2-0-role-switch': device_add
> [ 9.898961] usb_role usb2-0-role-switch: Linked as a sync state only consumer to 3-0008
> [ 9.898963] /bus@...adctl@...0000/ports/usb2-0 Dropping the fwnode link to /bus@...2c@...0000/typec@8
> [ 9.898970] tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 3-0008
> [ 9.907920] tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 3-0008
> [ 9.916841] tegra-xusb-padctl 3520000.padctl: Failed to create device link (0x180) with 3-0008
> [ 9.925798] ucsi_ccg 3-0008: Dropping the link to usb2-0-role-switch
> [ 9.925808] device: 'usb_role:usb2-0-role-switch--i2c:3-0008': device_unregister
> [ 9.925903] ucsi_ccg 3-0008: Dropping the link to 3520000.padctl
> [ 9.925908] device: 'platform:3520000.padctl--i2c:3-0008': device_unregister
> [ 9.926001] ucsi_ccg 3-0008: bus: 'i2c': really_probe: bound device to driver ucsi_ccg
> [ 9.963266] device: 'platform:3520000.padctl--typec:port0': device_add
> [ 9.963296] typec port0: Linked as a consumer to 3520000.padctl
> [ 9.963298] /bus@...2c@...0000/typec@...onnector@0 Dropping the fwnode link to /bus@...adctl@...0000
> [ 10.015196] device: 'platform:3520000.padctl--typec:port1': device_add
> [ 10.015291] typec port1: Linked as a sync state only consumer to 3520000.padctl
> [ 10.015302] /bus@...2c@...0000/typec@...onnector@1 Dropping the fwnode link to /bus@...adctl@35
>
> Let me know if there is anything else you need.
I'm guessing a similar change to what Saravana suggested for the
of_dp_aux_populate_bus() helper is needed here:
diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index cfdb54b6070a..0a2096085971 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -543,7 +543,7 @@ static int tegra_xusb_port_init(struct tegra_xusb_port *port,
device_initialize(&port->dev);
port->dev.type = &tegra_xusb_port_type;
- port->dev.of_node = of_node_get(np);
+ device_set_node(&port->dev, of_fwnode_handle(of_node_get(np)));
port->dev.parent = padctl->dev;
err = dev_set_name(&port->dev, "%s-%u", name, index);
As a side note, I wonder if it would be possible to detect these mistakes... But
I'm guessing there are legitimate situations where there's no fwnode.
Thanks,
Nícolas
Powered by blists - more mailing lists