[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <beeb2475-dc82-485d-a984-5d6554a4c379@gmail.com>
Date: Thu, 24 Oct 2024 09:31:17 +0300
From: Ivaylo Ivanov <ivo.ivanov.ivanov1@...il.com>
To: Markuss Broks <markuss.broks@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Lorenzo Pieralisi <lpieralisi@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
Sylwester Nawrocki <s.nawrocki@...sung.com>,
Linus Walleij <linus.walleij@...aro.org>, Tomasz Figa
<tomasz.figa@...il.com>, Will Deacon <will@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzk@...nel.org>, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-gpio@...r.kernel.org,
Maksym Holovach <nergzd@...gzd723.xyz>
Subject: Re: [PATCH 11/12] arm64: dts: exynos: Add Exynos9810 SoC support
On 10/24/24 01:36, Markuss Broks wrote:
> Exynos 9810 is an ARMv8 mobile SoC found in various Samsung devices,
> such as Samsung Galaxy S9 (starlte), S9 Plus (star2lte),
> Note 9 (crownlte) and perhaps others.
>
> Add minimal support for this SoC, including basic stuff like:
> - PSCI for bringing up secondary cores
> - ARMv8 generic timer
> - GPIO and pinctrl.
>
> The firmware coming with the devices based on this SoC is buggy
> and doesn't configure CNTFRQ_EL0, as required by spec, so it's
> needed to hardcode the frequency in the timer node.
>
> Co-authored-by: Maksym Holovach <nergzd@...gzd723.xyz>
> Signed-off-by: Markuss Broks <markuss.broks@...il.com>
> ---
> arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi | 525 +++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos9810.dtsi | 256 ++++++++++
> 2 files changed, 781 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..4b2ee59dc7241b0ec31c99fd909d1c5e25aa77e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2024 Markuss Broks <markuss.broks@...il.com>
> + * Copyright (c) 2024 Maksym Holovach <nergzd@...gzd723.xyz>
> + */
> +
> +#include "exynos-pinctrl.h"
> +
> +&pinctrl_alive {
> + wakeup-interrupt-controller {
> + compatible = "samsung,exynos9810-wakeup-eint",
> + "samsung,exynos850-wakeup-eint",
> + "samsung,exynos7-wakeup-eint";
> + };
> +
> + etc1: etc1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
[snip]
> +
> + gpp3: gpp3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpg0: gpg0-gpio-bank {
gpgX comes before gppX, sort all the nodes :D
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
[snip]
> + };
> +};
> +
> +#include "exynos9810-pinctrl.dtsi"
> +#include "arm/samsung/exynos-syscon-restart.dtsi"
>
Powered by blists - more mailing lists