[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <258bf011-cca6-6d56-c6f2-a9c619c9a212@quicinc.com>
Date: Thu, 24 Oct 2024 15:43:10 +0530
From: Krishna Chaitanya Chundru <quic_krichai@...cinc.com>
To: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>,
<manivannan.sadhasivam@...aro.org>
CC: Bjorn Helgaas <bhelgaas@...gle.com>, <linux-pci@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Dmitry Baryshkov
<dmitry.baryshkov@...aro.org>,
Johan Hovold <johan+linaro@...nel.org>,
"Abel
Vesa" <abel.vesa@...aro.org>,
Stephan Gerhold <stephan.gerhold@...aro.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Bjorn Andersson
<bjorn.andersson@....qualcomm.com>,
<stable+noautosel@...nel.org>
Subject: Re: [PATCH 0/5] PCI/pwrctl: Ensure that the pwrctl drivers are probed
before PCI client drivers
On 10/23/2024 4:00 PM, Bartosz Golaszewski wrote:
> On Tue, 22 Oct 2024 at 12:28, Manivannan Sadhasivam via B4 Relay
> <devnull+manivannan.sadhasivam.linaro.org@...nel.org> wrote:
>>
>> Hi,
>>
>> This series reworks the PCI/pwrctl integration to ensure that the pwrctl drivers
>> are always probed before the PCI client drivers. This series addresses a race
>> condition when both pwrctl and pwrctl/pwrseq drivers probe parallely (even when
>> the later one probes last). One such issue was reported for the Qcom X13s
>> platform with WLAN module and fixed with 'commit a9aaf1ff88a8 ("power:
>> sequencing: request the WLAN enable GPIO as-is")'.
>>
>> Though the issue was fixed with a hack in the pwrseq driver, it was clear that
>> the issue is applicable to all pwrctl drivers. Hence, this series tries to
>> address the issue in the PCI/pwrctl integration.
>>
>> - Mani
>>
>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>> ---
>> Manivannan Sadhasivam (5):
>> PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
>> PCI/pwrctl: Create pwrctl devices only if at least one power supply is present
>> PCI/pwrctl: Ensure that the pwrctl drivers are probed before the PCI client drivers
>> PCI/pwrctl: Move pwrctl device creation to its own helper function
>> PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
>>
>> drivers/pci/bus.c | 64 +++++++++++++++++++++++++++++++++++++++++------
>> drivers/pci/of.c | 27 ++++++++++++++++++++
>> drivers/pci/pci.h | 5 ++++
>> drivers/pci/pwrctl/core.c | 10 --------
>> drivers/pci/remove.c | 17 ++++++-------
>> 5 files changed, 96 insertions(+), 27 deletions(-)
>> ---
>> base-commit: 48dc7986beb60522eb217c0016f999cc7afaf0b7
>> change-id: 20241022-pci-pwrctl-rework-a1b024158555
>>
>> Best regards,
>> --
>> Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>>
>>
>
> Excellent work, thanks for doing this.
>
> Tested on: sc8280xp-crd, RB5 and sm8450-hdk.
>
> Tested-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Just a couple nits from my side under respective patches.
>
> Bart
Tested on: qcs6490-rb3gen board with work in progress qps615 pcie switch
Tested-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
- Krishna Chaitanya.
>
Powered by blists - more mailing lists