[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAGXv+5FeS0z74yyCL_8WcsBRp0=endU5rG5jSTN7=cOojDsG3Q@mail.gmail.com>
Date: Thu, 24 Oct 2024 18:17:21 +0800
From: Chen-Yu Tsai <wenst@...omium.org>
To: Hsin-Te Yuan <yuanhsinte@...omium.org>
Cc: "Rafael J. Wysocki" <rafael@...nel.org>, Daniel Lezcano <daniel.lezcano@...aro.org>,
Zhang Rui <rui.zhang@...el.com>, Lukasz Luba <lukasz.luba@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, James Lo <james.lo@...iatek.com>,
Hsin-Yi Wang <hsinyi@...omium.org>
Subject: Re: [PATCH RESEND v12] thermal/drivers/mediatek: add another get_temp
ops for thermal sensors
(Dropped folks whose emails are bouncing)
On Thu, Oct 24, 2024 at 5:56 PM Chen-Yu Tsai <wenst@...omium.org> wrote:
>
> Hi,
>
> The subject could be better worded, like "expose all thermal sensors".
Please also add "auxadc_thermal" to the subject, since there are now
two drivers under the mediatek folder, it is not immediately clear
which one this applies to.
ChenYu
> On Wed, Oct 16, 2024 at 1:47 PM Hsin-Te Yuan <yuanhsinte@...omium.org> wrote:
> >
> > From: James Lo <james.lo@...iatek.com>
> >
> > Previously, the driver only supported reading the temperature from all
> > sensors and returning the maximum value. This updatea adds another
>
> ^ typo
>
> > get_temp ops to support reading the temperature from each sensor
> > separately.
>
> You should mention why you want to expose all the thermal sensors.
> Just making them available to userspace is a good enough reason.
> You could also mention that some other drivers needs access to
> some of the individual sensor readings.
>
> You probably don't need to go into specific details about adding
> a new get_temp ops.
>
> > This feature provides the ability to read all thermal sensor values in
> > the SoC through the node /sys/class/thermal.
>
> This paragraph is redundant. It is implied by the subject.
>
> > Signed-off-by: Michael Kao <michael.kao@...iatek.com>
> > Signed-off-by: Hsin-Yi Wang <hsinyi@...omium.org>
> > Signed-off-by: Ben Tseng <ben.tseng@...iatek.com>
> > Signed-off-by: James Lo <james.lo@...iatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> > Signed-off-by: Hsin-Te Yuan <yuanhsinte@...omium.org>
> > ---
> > Changes in v12:
> > - Remove unnecessary check and unused variable assignment in mtk_read_sensor_temp.
> > - Add more about what this patch achieves in the commit message.
> > - Link to v11: https://lore.kernel.org/r/20240809-auxadc_thermal-v11-1-af36cc74f3a3@chromium.org
> >
> > Changes in V11:
> > - Rebase on kernel v6.11-rc2
> > - Use mtk_thermal_temp_is_valid in mtk_read_sensor_temp just like
> > mtk_thermal_bank_temperature
> > - Change the error handling of devm_thermal_of_zone_register return
> > value
> > - link to V10: https://lore.kernel.org/lkml/20220519101044.16765-1-james.lo@mediatek.com/
> >
> > Changes in V10:
> > - Rebase to kernel-v5.18-rc7
> > - Resend
> >
> > Changes in V9:
> > - Rebase to kernel-v5.14-rc1
> > - Bind raw_to_mcelsius_v1 or raw_to_mcelsius_v2 to compatible
> > data of struct mtk_thermal_data
> > - Remove duplicate struct 'mtk_thermal_bank'
> > - Remove unnecessary if condition check
> > - Return error if any thermal zone fail to register
> >
> > Changes in V8:
> > - Rebase to kernel-v5.13-rc1
> > - Resend
> >
> > Changes in v7:
> > - Fix build error in v6.
> >
> > Changes in v6:
> > - Rebase to kernel-5.11-rc1.
> > - [1/3]
> > - add interrupts property.
> > - [2/3]
> > - add the Tested-by in the commit message.
> > - [3/3]
> > - use the mt->conf->msr[id] instead of conf->msr[id] in the
> > _get_sensor_temp and mtk_thermal_bank_temperature.
> > - remove the redundant space in _get_sensor_temp and
> > mtk_read_sensor_temp.
> > - change kmalloc to dev_kmalloc in mtk_thermal_probe.
> >
> > Changes in v5:
> > - Rebase to kernel-5.9-rc1.
> > - Revise the title of cover letter.
> > - Drop "[v4,7/7] thermal: mediatek: use spinlock to protect PTPCORESEL"
> > - [2/2]
> > - Add the judgement to the version of raw_to_mcelsius.
> >
> > Changes in v4:
> > - Rebase to kernel-5.6-rc1.
> > - [1/7]
> > - Squash thermal zone settings in the dtsi from [v3,5/8]
> > arm64: dts: mt8183: Increase polling frequency for CPU thermal zone.
> > - Remove the property of interrupts and mediatek,hw-reset-temp.
> > - [2/7]
> > - Correct commit message.
> > - [4/7]
> > - Change the target temperature to the 80C and change the commit message.
> > - [6/7]
> > - Adjust newline alignment.
> > - Fix the judgement on the return value of registering thermal zone.
> >
> > Changes in v3:
> > - Rebase to kernel-5.5-rc1.
> > - [1/8]
> > - Update sustainable power of cpu, tzts1~5 and tztsABB.
> > - [7/8]
> > - Bypass the failure that non cpu_thermal sensor is not find in thermal-zones
> > in dts, which is normal for mt8173, so prompt a warning here instead of
> > failing.
> >
> > Return -EAGAIN instead of -EACCESS on the first read of sensor that
> > often are bogus values. This can avoid following warning on boot:
> >
> > thermal thermal_zone6: failed to read out thermal zone (-13)
> >
> > Changes in v2:
> > - [1/8]
> > - Add the sustainable-power,trips,cooling-maps to the tzts1~tztsABB.
> > - [4/8]
> > - Add the min opp of cpu throttle.
> > ---
> >
> > ---
> > drivers/thermal/mediatek/auxadc_thermal.c | 70 +++++++++++++++++++++++++++----
> > 1 file changed, 62 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/thermal/mediatek/auxadc_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
> > index 9ee2e7283435acfcbb1a956303b6122a08affecc..10938be2e5545fba2fff7d5cc5a0269d42e5d44d 100644
> > --- a/drivers/thermal/mediatek/auxadc_thermal.c
> > +++ b/drivers/thermal/mediatek/auxadc_thermal.c
> > @@ -847,7 +847,8 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
> >
> > static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> > {
> > - struct mtk_thermal *mt = thermal_zone_device_priv(tz);
> > + struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
> > + struct mtk_thermal *mt = bank->mt;
> > int i;
> > int tempmax = INT_MIN;
> >
> > @@ -866,10 +867,41 @@ static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
> > return 0;
> > }
> >
> > +static int mtk_read_sensor_temp(struct thermal_zone_device *tz, int *temperature)
> > +{
> > + struct mtk_thermal_bank *bank = thermal_zone_device_priv(tz);
> > + struct mtk_thermal *mt = bank->mt;
> > + const struct mtk_thermal_data *conf = mt->conf;
> > + int id = bank->id - 1;
> > + int temp = INT_MIN;
> > + u32 raw;
> > +
> > + raw = readl(mt->thermal_base + conf->msr[id]);
> > +
> > + temp = mt->raw_to_mcelsius(mt, id, raw);
> > +
> > + /*
> > + * The first read of a sensor often contains very high bogus
> > + * temperature value. Filter these out so that the system does
> > + * not immediately shut down.
> > + */
> > +
> > + if (unlikely(!mtk_thermal_temp_is_valid(temp)))
> > + return -EAGAIN;
> > +
> > + *temperature = temp;
> > +
> > + return 0;
> > +}
> > +
> > static const struct thermal_zone_device_ops mtk_thermal_ops = {
> > .get_temp = mtk_read_temp,
> > };
> >
> > +static const struct thermal_zone_device_ops mtk_thermal_sensor_ops = {
> > + .get_temp = mtk_read_sensor_temp,
> > +};
> > +
> > static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
> > u32 apmixed_phys_base, u32 auxadc_phys_base,
> > int ctrl_id)
> > @@ -1199,6 +1231,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> > u64 auxadc_phys_base, apmixed_phys_base;
> > struct thermal_zone_device *tzdev;
> > void __iomem *apmixed_base, *auxadc_base;
> > + struct mtk_thermal_bank *tz;
> >
> > mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
> > if (!mt)
> > @@ -1285,14 +1318,35 @@ static int mtk_thermal_probe(struct platform_device *pdev)
> > mtk_thermal_init_bank(mt, i, apmixed_phys_base,
> > auxadc_phys_base, ctrl_id);
> >
> > - tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
> > - &mtk_thermal_ops);
> > - if (IS_ERR(tzdev))
> > - return PTR_ERR(tzdev);
> > + for (i = 0; i <= mt->conf->num_sensors; i++) {
> > + tz = devm_kmalloc(&pdev->dev, sizeof(*tz), GFP_KERNEL);
> > + if (!tz)
> > + return -ENOMEM;
> > +
> > + tz->mt = mt;
> > + tz->id = i;
> > +
> > + tzdev = devm_thermal_of_zone_register(&pdev->dev, i,
> > + tz, (i == 0) ?
> > + &mtk_thermal_ops
> > + : &mtk_thermal_sensor_ops);
> > +
> > + if (IS_ERR(tzdev)) {
> > + ret = PTR_ERR(tzdev);
> > + if (ret == -ENODEV) {
> > + dev_warn(&pdev->dev, "can't find thermal sensor %d\n", i);
>
> "Can't find thermal zone for sensor %d; sensor skipped.\n".
>
> Based on the core code, the failure is not being able to find a matching
> thermal zone node.
>
> Also, make it known to the user what happened.
>
> > + continue;
> > + }
> > + dev_err(&pdev->dev,
> > + "Error: Failed to register thermal zone %d, ret = %d\n",
> > + i, ret);
> > + return ret;
>
> return dev_err_probe(&pdev->dev, ret, "Failed to register thermal zone
> %d.\n", i);
>
> > + }
> >
> > - ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
> > - if (ret)
> > - dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
> > + ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
> > + if (ret)
> > + dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs: %d\n", ret);
>
> Mention which sensor ID this failed for.
>
> ChenYu
>
> > + }
> >
> > return 0;
> > }
> >
> > ---
> > base-commit: b589839414be04b2b37e4bf6f84af576c99faf64
> > change-id: 20240809-auxadc_thermal-9be338ec8b1c
> >
> > Best regards,
> > --
> > Hsin-Te Yuan <yuanhsinte@...omium.org>
> >
> >
Powered by blists - more mailing lists