lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
 <MA0P287MB28222636F2331748170B6F16FE4F2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM>
Date: Fri, 25 Oct 2024 16:13:03 +0800
From: Chen Wang <unicorn_wang@...look.com>
To: Sean Young <sean@...s.org>
Cc: Chen Wang <unicornxw@...il.com>, ukleinek@...nel.org, robh@...nel.org,
 krzk+dt@...nel.org, conor+dt@...nel.org, inochiama@...look.com,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
 linux-pwm@...r.kernel.org, linux-riscv@...ts.infradead.org,
 chao.wei@...hgo.com, haijiao.liu@...hgo.com, xiaoguang.xing@...hgo.com,
 chunzhi.lin@...hgo.com
Subject: Re: [PATCH v5 2/3] pwm: sophgo: add driver for Sophgo SG2042 PWM

Hi, Sean,

Since the changes are minor compared to v4, I have kept your signature. 
If you find any problem, please let me know.

Thanks,

Chen

On 2024/10/25 16:07, Chen Wang wrote:
> From: Chen Wang <unicorn_wang@...look.com>
>
> Add a PWM driver for PWM controller in Sophgo SG2042 SoC.
>
> Signed-off-by: Chen Wang <unicorn_wang@...look.com>
> Signed-off-by: Sean Young <sean@...s.org>
> ---
>   drivers/pwm/Kconfig             |  10 ++
>   drivers/pwm/Makefile            |   1 +
>   drivers/pwm/pwm-sophgo-sg2042.c | 194 ++++++++++++++++++++++++++++++++
>   3 files changed, 205 insertions(+)
>   create mode 100644 drivers/pwm/pwm-sophgo-sg2042.c
>
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 0915c1e7df16..ec85f3895936 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -584,6 +584,16 @@ config PWM_SL28CPLD
>   	  To compile this driver as a module, choose M here: the module
>   	  will be called pwm-sl28cpld.
>   
> +config PWM_SOPHGO_SG2042
> +	tristate "Sophgo SG2042 PWM support"
> +	depends on ARCH_SOPHGO || COMPILE_TEST
> +	help
> +	  PWM driver for the PWM controller on Sophgo SG2042 SoC. The PWM
> +	  controller supports outputing 4 channels of PWM waveforms.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm_sophgo_sg2042.
> +
>   config PWM_SPEAR
>   	tristate "STMicroelectronics SPEAr PWM support"
>   	depends on PLAT_SPEAR || COMPILE_TEST
> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
> index 9081e0c0e9e0..539e0def3f82 100644
> --- a/drivers/pwm/Makefile
> +++ b/drivers/pwm/Makefile
> @@ -53,6 +53,7 @@ obj-$(CONFIG_PWM_RZ_MTU3)	+= pwm-rz-mtu3.o
>   obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
>   obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
>   obj-$(CONFIG_PWM_SL28CPLD)	+= pwm-sl28cpld.o
> +obj-$(CONFIG_PWM_SOPHGO_SG2042)	+= pwm-sophgo-sg2042.o
>   obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
>   obj-$(CONFIG_PWM_SPRD)		+= pwm-sprd.o
>   obj-$(CONFIG_PWM_STI)		+= pwm-sti.o
> diff --git a/drivers/pwm/pwm-sophgo-sg2042.c b/drivers/pwm/pwm-sophgo-sg2042.c
> new file mode 100644
> index 000000000000..a3d12505e4aa
> --- /dev/null
> +++ b/drivers/pwm/pwm-sophgo-sg2042.c
> @@ -0,0 +1,194 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sophgo SG2042 PWM Controller Driver
> + *
> + * Copyright (C) 2024 Sophgo Technology Inc.
> + * Copyright (C) 2024 Chen Wang <unicorn_wang@...look.com>
> + *
> + * Limitations:
> + * - After reset, the output of the PWM channel is always high.
> + *   The value of HLPERIOD/PERIOD is 0.
> + * - When HLPERIOD or PERIOD is reconfigured, PWM will start to
> + *   output waveforms with the new configuration after completing
> + *   the running period.
> + * - When PERIOD and HLPERIOD is set to 0, the PWM wave output will
> + *   be stopped and the output is pulled to high.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pwm.h>
> +#include <linux/reset.h>
> +
> +#include <asm/div64.h>
> +
> +/*
> + * Offset RegisterName
> + * 0x0000 HLPERIOD0
> + * 0x0004 PERIOD0
> + * 0x0008 HLPERIOD1
> + * 0x000C PERIOD1
> + * 0x0010 HLPERIOD2
> + * 0x0014 PERIOD2
> + * 0x0018 HLPERIOD3
> + * 0x001C PERIOD3
> + * Four groups and every group is composed of HLPERIOD & PERIOD
> + */
> +#define SG2042_HLPERIOD(chan) ((chan) * 8 + 0)
> +#define SG2042_PERIOD(chan) ((chan) * 8 + 4)
> +
> +#define SG2042_PWM_CHANNELNUM	4
> +
> +/**
> + * struct sg2042_pwm_ddata - private driver data
> + * @base:		base address of mapped PWM registers
> + * @clk_rate_hz:	rate of base clock in HZ
> + */
> +struct sg2042_pwm_ddata {
> +	void __iomem *base;
> +	unsigned long clk_rate_hz;
> +};
> +
> +static void pwm_sg2042_config(void __iomem *base, unsigned int chan, u32 period, u32 hlperiod)
> +{
> +	writel(period, base + SG2042_PERIOD(chan));
> +	writel(hlperiod, base + SG2042_HLPERIOD(chan));
> +}
> +
> +static int pwm_sg2042_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> +			    const struct pwm_state *state)
> +{
> +	struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip);
> +	u32 hlperiod;
> +	u32 period;
> +
> +	if (state->polarity == PWM_POLARITY_INVERSED)
> +		return -EINVAL;
> +
> +	if (!state->enabled) {
> +		pwm_sg2042_config(ddata->base, pwm->hwpwm, 0, 0);
> +		return 0;
> +	}
> +
> +	/*
> +	 * Period of High level (duty_cycle) = HLPERIOD x Period_clk
> +	 * Period of One Cycle (period) = PERIOD x Period_clk
> +	 */
> +	period = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->period, NSEC_PER_SEC), U32_MAX);
> +	hlperiod = min(mul_u64_u64_div_u64(ddata->clk_rate_hz, state->duty_cycle, NSEC_PER_SEC), U32_MAX);
> +
> +	if (hlperiod > period) {
> +		dev_err(pwmchip_parent(chip), "period < hlperiod, failed to apply current setting\n");
> +		return -EINVAL;
> +	}
> +
> +	dev_dbg(pwmchip_parent(chip), "chan[%u]: period=%u, hlperiod=%u\n",
> +		pwm->hwpwm, period, hlperiod);
> +
> +	pwm_sg2042_config(ddata->base, pwm->hwpwm, period, hlperiod);
> +
> +	return 0;
> +}
> +
> +static int pwm_sg2042_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
> +				struct pwm_state *state)
> +{
> +	struct sg2042_pwm_ddata *ddata = pwmchip_get_drvdata(chip);
> +	unsigned int chan = pwm->hwpwm;
> +	u32 hlperiod;
> +	u32 period;
> +
> +	period = readl(ddata->base + SG2042_PERIOD(chan));
> +	hlperiod = readl(ddata->base + SG2042_HLPERIOD(chan));
> +
> +	if (!period && !hlperiod)
> +		state->enabled = false;
> +	else
> +		state->enabled = true;
> +
> +	state->period = DIV_ROUND_UP_ULL((u64)period * NSEC_PER_SEC, ddata->clk_rate_hz);
> +	state->duty_cycle = DIV_ROUND_UP_ULL((u64)hlperiod * NSEC_PER_SEC, ddata->clk_rate_hz);
> +
> +	state->polarity = PWM_POLARITY_NORMAL;
> +
> +	return 0;
> +}
> +
> +static const struct pwm_ops pwm_sg2042_ops = {
> +	.apply = pwm_sg2042_apply,
> +	.get_state = pwm_sg2042_get_state,
> +};
> +
> +static const struct of_device_id sg2042_pwm_ids[] = {
> +	{ .compatible = "sophgo,sg2042-pwm" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sg2042_pwm_ids);
> +
> +static int pwm_sg2042_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct sg2042_pwm_ddata *ddata;
> +	struct reset_control *rst;
> +	struct pwm_chip *chip;
> +	struct clk *clk;
> +	int ret;
> +
> +	chip = devm_pwmchip_alloc(dev, SG2042_PWM_CHANNELNUM, sizeof(*ddata));
> +	if (IS_ERR(chip))
> +		return PTR_ERR(chip);
> +	ddata = pwmchip_get_drvdata(chip);
> +
> +	ddata->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(ddata->base))
> +		return PTR_ERR(ddata->base);
> +
> +	clk = devm_clk_get_enabled(dev, "apb");
> +	if (IS_ERR(clk))
> +		return dev_err_probe(dev, PTR_ERR(clk), "failed to get base clk\n");
> +
> +	ret = devm_clk_rate_exclusive_get(dev, clk);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get exclusive rate\n");
> +
> +	ddata->clk_rate_hz = clk_get_rate(clk);
> +	if (!ddata->clk_rate_hz || ddata->clk_rate_hz > NSEC_PER_SEC)
> +		return dev_err_probe(dev, -EINVAL,
> +				     "Invalid clock rate: %lu\n", ddata->clk_rate_hz);
> +
> +	rst = devm_reset_control_get_optional_shared(dev, NULL);
> +	if (IS_ERR(rst))
> +		return dev_err_probe(dev, PTR_ERR(rst), "failed to get reset\n");
> +
> +	/* Deassert reset */
> +	ret = reset_control_deassert(rst);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to deassert\n");
> +
> +	chip->ops = &pwm_sg2042_ops;
> +	chip->atomic = true;
> +
> +	ret = devm_pwmchip_add(dev, chip);
> +	if (ret < 0) {
> +		reset_control_assert(rst);
> +		return dev_err_probe(dev, ret, "failed to register PWM chip\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static struct platform_driver pwm_sg2042_driver = {
> +	.driver	= {
> +		.name = "sg2042-pwm",
> +		.of_match_table = sg2042_pwm_ids,
> +	},
> +	.probe = pwm_sg2042_probe,
> +};
> +module_platform_driver(pwm_sg2042_driver);
> +
> +MODULE_AUTHOR("Chen Wang");
> +MODULE_DESCRIPTION("Sophgo SG2042 PWM driver");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ