[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241025095915.22313-2-eichest@gmail.com>
Date: Fri, 25 Oct 2024 11:58:02 +0200
From: Stefan Eichenberger <eichest@...il.com>
To: robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
shawnguo@...nel.org,
s.hauer@...gutronix.de,
kernel@...gutronix.de,
festevam@...il.com,
francesco.dolcini@...adex.com
Cc: devicetree@...r.kernel.org,
imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Stefan Eichenberger <stefan.eichenberger@...adex.com>
Subject: [PATCH v1 1/2] arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
From: Stefan Eichenberger <stefan.eichenberger@...adex.com>
By default we expect all i2c nodes to be single-master, we do not have
any module or carrier board that uses multi-master mode on any i2c
controller. With this property set, we benefit from optimisations made
exclusively for single-masters.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@...adex.com>
---
arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 5fa3959141911..95d5d2333ca1e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -367,6 +367,7 @@ &i2c1 {
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ single-master;
status = "okay";
pca9450: pmic@25 {
@@ -561,6 +562,7 @@ &i2c2 {
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ single-master;
status = "disabled";
};
@@ -574,6 +576,7 @@ &i2c3 {
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ single-master;
};
/* Verdin I2C_1 */
@@ -584,6 +587,7 @@ &i2c4 {
pinctrl-1 = <&pinctrl_i2c4_gpio>;
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ single-master;
gpio_expander_21: gpio-expander@21 {
compatible = "nxp,pcal6416";
--
2.43.0
Powered by blists - more mailing lists