linux-kernel - [PATCH v4 01/13] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241028023740.19732-2-victor.liu@nxp.com>
Date: Mon, 28 Oct 2024 10:37:28 +0800
From: Liu Ying <victor.liu@....com>
To: dri-devel@...ts.freedesktop.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-media@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org
Cc: andrzej.hajda@...el.com,
	neil.armstrong@...aro.org,
	rfoss@...nel.org,
	Laurent.pinchart@...asonboard.com,
	jonas@...boo.se,
	jernej.skrabec@...il.com,
	maarten.lankhorst@...ux.intel.com,
	mripard@...nel.org,
	tzimmermann@...e.de,
	airlied@...il.com,
	simona@...ll.ch,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	quic_jesszhan@...cinc.com,
	mchehab@...nel.org,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	kernel@...gutronix.de,
	festevam@...il.com,
	catalin.marinas@....com,
	will@...nel.org,
	sakari.ailus@...ux.intel.com,
	hverkuil@...all.nl,
	tomi.valkeinen@...asonboard.com,
	quic_bjorande@...cinc.com,
	geert+renesas@...der.be,
	dmitry.baryshkov@...aro.org,
	arnd@...db.de,
	nfraprado@...labora.com,
	thierry.reding@...il.com,
	prabhakar.mahadev-lad.rj@...renesas.com,
	sam@...nborg.org,
	marex@...x.de,
	biju.das.jz@...renesas.com
Subject: [PATCH v4 01/13] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz

The LVDS panel "multi-inno,mi1010ait-1cp" used on this platform has
a typical pixel clock rate of 70MHz.  Set "media_disp2_pix" clock rate
to that rate, instead of the original 68.9MHz.  The LVDS serial clock
is controlled by "media_ldb" clock.  It should run at 490MHz(7-fold the
pixel clock rate due to single LVDS link).  Set "video_pll1" clock rate
and "media_ldb" to 490MHz to achieve that.

This should be able to suppress this LDB driver warning:
[   17.206644] fsl-ldb 32ec0000.blk-ctrl:bridge@5c: Configured LDB clock (70000000 Hz) does not match requested LVDS clock: 490000000 Hz

This also makes the display mode used by the panel pass mode validation
against pixel clock rate and "media_ldb" clock rate in a certain display
driver.

Signed-off-by: Liu Ying <victor.liu@....com>
---
v4:
* No change.

v3:
* New patch.

 .../dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts     | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
index 30962922b361..2c75da5f064f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts
@@ -52,7 +52,7 @@ &lcdif2 {
 
 &lvds_bridge {
 	/* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */
-	assigned-clock-rates = <482300000>;
+	assigned-clock-rates = <490000000>;
 	status = "okay";
 
 	ports {
@@ -70,10 +70,10 @@ &media_blk_ctrl {
 	 */
 	assigned-clock-rates = <500000000>, <200000000>, <0>,
 		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
-		<68900000>,
+		<70000000>,
 		<500000000>,
-		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
-		<964600000>;
+		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB */
+		<490000000>;
 };
 
 &pwm4 {
-- 
2.34.1