[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c418e93a-7305-4ca6-85c1-42bd458f4e7b@huawei.com>
Date: Tue, 29 Oct 2024 22:14:56 +0800
From: Yongbang Shi <shiyongbang@...wei.com>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <xinliang.liu@...aro.org>, <tiantao6@...ilicon.com>,
<maarten.lankhorst@...ux.intel.com>, <mripard@...nel.org>,
<tzimmermann@...e.de>, <airlied@...il.com>, <daniel@...ll.ch>,
<kong.kongxinwei@...ilicon.com>, <liangjian010@...wei.com>,
<chenjianmin@...wei.com>, <lidongming5@...wei.com>, <libaihan@...wei.com>,
<shenjian15@...wei.com>, <shaojijie@...wei.com>,
<dri-devel@...ts.freedesktop.org>, <linux-kernel@...r.kernel.org>,
<shiyongbang@...wei.com>
Subject: Re: [PATCH V2 drm-dp 1/4] drm/hisilicon/hibmc: add dp aux in hibmc
> On Tue, Oct 22, 2024 at 08:41:45PM +0800, Yongbang Shi wrote:
>> From: baihan li <libaihan@...wei.com>
>>
>> Add dp aux read/write functions. They are basic functions
>> and will be used later.
>>
>> Signed-off-by: baihan li <libaihan@...wei.com>
>> ---
>> ChangeLog:
>> v1 -> v2:
>> - using drm_dp_aux frame implement dp aux read and write functions, suggested by Jani Nikula.
>> - using drm dp header files' dp macros instead, suggested by Andy Yan.
>> v1:https://lore.kernel.org/all/20240930100610.782363-1-shiyongbang@huawei.com/
>> ---
>> drivers/gpu/drm/hisilicon/hibmc/Makefile | 3 +-
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c | 162 +++++++++++++++++++
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h | 31 ++++
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h | 74 +++++++++
>> drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h | 76 +++++++++
>> 5 files changed, 345 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h
>> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> index d25c75e60d3d..8770ec6dfffd 100644
>> --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>> @@ -1,4 +1,5 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> -hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o
>> +hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
>> + dp/dp_aux.o
>>
>> obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c
>> new file mode 100644
>> index 000000000000..0078cafdf86d
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c
>> @@ -0,0 +1,162 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +// Copyright (c) 2024 Hisilicon Limited.
>> +
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/minmax.h>
>> +#include <drm/drm_device.h>
>> +#include <drm/drm_print.h>
>> +#include "dp_comm.h"
>> +#include "dp_reg.h"
>> +#include "dp_aux.h"
>> +
>> +#define DP_MIN_PULSE_NUM 0x9
>> +
>> +static void dp_aux_reset(const struct dp_dev *dp)
>> +{
>> + dp_write_bits(dp->base + DP_DPTX_RST_CTRL, DP_CFG_AUX_RST_N, 0x0);
>> + usleep_range(10, 15);
>> + dp_write_bits(dp->base + DP_DPTX_RST_CTRL, DP_CFG_AUX_RST_N, 0x1);
>> +}
>> +
>> +static void dp_aux_read_data(struct dp_dev *dp, u8 *buf, u8 size)
>> +{
>> + u32 reg_num;
>> + u32 value;
>> + u32 num;
>> + u8 i, j;
>> +
>> + reg_num = round_up(size, AUX_4_BYTE) / AUX_4_BYTE;
>> + for (i = 0; i < reg_num; i++) {
>> + /* number of bytes read from a single register */
>> + num = min(size - i * AUX_4_BYTE, AUX_4_BYTE);
>> + value = readl(dp->base + DP_AUX_RD_DATA0 + i * AUX_4_BYTE);
>> + /* convert the 32-bit value of the register to the buffer. */
>> + for (j = 0; j < num; j++)
>> + buf[i * AUX_4_BYTE + j] = value >> (j * AUX_8_BIT);
>> + }
>> +}
>> +
>> +static void dp_aux_write_data(struct dp_dev *dp, u8 *buf, u8 size)
>> +{
>> + u32 reg_num;
>> + u32 value;
>> + u8 i, j;
>> + u32 num;
>> +
>> + reg_num = round_up(size, AUX_4_BYTE) / AUX_4_BYTE;
>> + for (i = 0; i < reg_num; i++) {
>> + /* number of bytes written to a single register */
>> + num = min_t(u8, size - i * AUX_4_BYTE, AUX_4_BYTE);
>> + value = 0;
>> + /* obtain the 32-bit value written to a single register. */
>> + for (j = 0; j < num; j++)
>> + value |= buf[i * AUX_4_BYTE + j] << (j * AUX_8_BIT);
>> + /* writing data to a single register */
>> + writel(value, dp->base + DP_AUX_WR_DATA0 + i * AUX_4_BYTE);
>> + }
>> +}
>> +
>> +static u32 dp_aux_build_cmd(const struct drm_dp_aux_msg *msg)
>> +{
>> + u32 aux_cmd = msg->request;
>> +
>> + if (msg->size)
>> + aux_cmd |= (msg->size - 1) << AUX_CMD_REQ_LEN_S;
>> + else
>> + aux_cmd |= 1 << AUX_CMD_I2C_ADDR_ONLY_S;
>> +
>> + aux_cmd |= msg->address << AUX_CMD_ADDR_S;
>> +
>> + return aux_cmd;
>> +}
>> +
>> +/* ret >= 0 ,ret is size; ret < 0, ret is err code */
>> +static int dp_aux_parse_xfer(struct dp_dev *dp, struct drm_dp_aux_msg *msg)
>> +{
>> + u32 buf_data_cnt;
>> + u32 aux_status;
>> + int ret = 0;
>> +
>> + aux_status = readl(dp->base + DP_AUX_STATUS);
>> + msg->reply = FIELD_GET(DP_CFG_AUX_STATUS, aux_status);
>> +
>> + if (aux_status & DP_CFG_AUX_TIMEOUT)
>> + return -ETIMEDOUT;
>> +
>> + /* only address */
>> + if (!msg->size)
>> + return 0;
>> +
>> + if (msg->reply != DP_AUX_NATIVE_REPLY_ACK)
>> + return 0;
>> +
>> + buf_data_cnt = FIELD_GET(DP_CFG_AUX_READY_DATA_BYTE, aux_status);
>> +
>> + switch (msg->request) {
>> + case DP_AUX_NATIVE_WRITE:
>> + ret = msg->size;
>> + break;
>> + case DP_AUX_I2C_WRITE | DP_AUX_I2C_MOT:
>> + if (buf_data_cnt == AUX_I2C_WRITE_SUCCESS)
>> + ret = msg->size;
>> + else if (buf_data_cnt == AUX_I2C_WRITE_PARTIAL_SUCCESS)
>> + ret = FIELD_GET(DP_CFG_AUX, aux_status);
>> + break;
>> + case DP_AUX_NATIVE_READ:
>> + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT:
>> + buf_data_cnt--;
>> + /* only the successful part of data is read */
>> + if (buf_data_cnt != msg->size) {
>> + ret = -EBUSY;
>> + } else { /* all data is successfully read */
>> + dp_aux_read_data(dp, msg->buffer, msg->size);
>> + ret = msg->size;
>> + }
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +/* ret >= 0 ,ret is size; ret < 0, ret is err code */
>> +static ssize_t dp_aux_xfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
>> +{
>> + struct dp_dev *dp = container_of(aux, struct dp_dev, aux);
>> + u32 aux_cmd;
>> + int ret;
>> + u32 val; /* val will be assigned at the beginning of readl_poll_timeout function */
>> +
>> + writel(0, dp->base + DP_AUX_WR_DATA0);
>> + writel(0, dp->base + DP_AUX_WR_DATA1);
>> + writel(0, dp->base + DP_AUX_WR_DATA2);
>> + writel(0, dp->base + DP_AUX_WR_DATA3);
>> +
>> + dp_aux_write_data(dp, msg->buffer, msg->size);
>> +
>> + aux_cmd = dp_aux_build_cmd(msg);
>> + writel(aux_cmd, dp->base + DP_AUX_CMD_ADDR);
>> +
>> + /* enable aux transfer */
>> + dp_write_bits(dp->base + DP_AUX_REQ, DP_CFG_AUX_REQ, 0x1);
>> + ret = readl_poll_timeout(dp->base + DP_AUX_REQ, val, !(val & DP_CFG_AUX_REQ), 50, 5000);
>> + if (ret) {
>> + dp_aux_reset(dp);
>> + return ret;
>> + }
>> +
>> + return dp_aux_parse_xfer(dp, msg);
>> +}
>> +
>> +void dp_aux_init(struct dp_dev *dp)
>> +{
>> + dp_write_bits(dp->base + DP_AUX_REQ, DP_CFG_AUX_SYNC_LEN_SEL, 0x0);
>> + dp_write_bits(dp->base + DP_AUX_REQ, DP_CFG_AUX_TIMER_TIMEOUT, 0x1);
>> + dp_write_bits(dp->base + DP_AUX_REQ, DP_CFG_AUX_MIN_PULSE_NUM, DP_MIN_PULSE_NUM);
>> +
>> + dp->aux.transfer = dp_aux_xfer;
>> + dp->aux.is_remote = 0;
>> + drm_dp_aux_init(&dp->aux);
>> +}
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h
>> new file mode 100644
>> index 000000000000..6f95a3750d60
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h
>> @@ -0,0 +1,31 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/* Copyright (c) 2024 Hisilicon Limited. */
>> +
>> +#ifndef DP_AUX_H
>> +#define DP_AUX_H
>> +
>> +#include <linux/bitops.h>
>> +#include "dp_comm.h"
>> +
>> +#define AUX_I2C_WRITE_SUCCESS 0x1
>> +#define AUX_I2C_WRITE_PARTIAL_SUCCESS 0x2
>> +
>> +#define EQ_MAX_RETRY 5
> unused
>
>> +
>> +#define DP_CFG_AUX_S 17
>> +#define DP_CFG_AUX_STATUS_S 4
> Both are unused
>
>> +
>> +#define AUX_4_BYTE 4
>> +#define AUX_4_BIT 4
>> +#define AUX_8_BIT 8
> AUX_4_BIT is unused. For other defines I think it's better to provide
> sensible names. BITS_IN_U32, BYTES_IN_U32
>
>> +
>> +#define AUX_READY_DATA_BYTE_S 12
> unused
>
>> +
>> +/* aux_cmd_addr register shift */
>> +#define AUX_CMD_REQ_LEN_S 4
>> +#define AUX_CMD_ADDR_S 8
>> +#define AUX_CMD_I2C_ADDR_ONLY_S 28
> Please use FIELD_PREP instead of definig shifts (and shift is usally
> _SHIFT, not _S)
>
>> +
>> +void dp_aux_init(struct dp_dev *dp);
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h
>> new file mode 100644
>> index 000000000000..26d97929dc06
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h
>> @@ -0,0 +1,74 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/* Copyright (c) 2024 Hisilicon Limited. */
>> +
>> +#ifndef DP_COMM_H
>> +#define DP_COMM_H
>> +
>> +#include <linux/types.h>
>> +#include <linux/bitops.h>
>> +#include <linux/errno.h>
>> +#include <linux/mutex.h>
>> +#include <linux/kernel.h>
>> +#include <linux/bitfield.h>
>> +#include <linux/io.h>
>> +
>> +#include <drm/display/drm_dp_helper.h>
>> +
>> +#define REG_LENGTH 32
>> +
>> +static inline u32 dp_read_bits(void __iomem *addr, u32 bit_mask)
>> +{
>> + u32 reg_val;
>> +
>> + reg_val = readl(addr);
>> +
>> + return (reg_val & bit_mask) >> __ffs(bit_mask);
> FIELD_GET
>
>> +}
>> +
>> +static inline void dp_write_bits(void __iomem *addr, u32 bit_mask, u32 val)
>> +{
>> + u32 reg_val;
>> +
>> + reg_val = readl(addr);
>> + reg_val &= ~bit_mask;
>> + reg_val |= (val << __ffs(bit_mask)) & bit_mask;
> FIELD_PREP
>
>> + writel(reg_val, addr);
> How is this protected from concurrent RMW cycles?
>
>> +}
>> +
>> +enum dpcd_revision {
>> + DPCD_REVISION_10 = 0x10,
>> + DPCD_REVISION_11,
>> + DPCD_REVISION_12,
>> + DPCD_REVISION_13,
>> + DPCD_REVISION_14,
> Any reason for ignoring defines in drm_dp.h?
Hi Dmitry,
I tried it but still can't find it, if you know, can you tell me which macro I can use?
Thanks,
Baihan
>
>> +};
>> +
>> +struct link_status {
>> + bool clock_recovered;
>> + bool channel_equalized;
>> + u8 cr_done_lanes;
>> +};
>> +
>> +struct link_cap {
>> + enum dpcd_revision rx_dpcd_revision;
>> + u8 link_rate;
>> + u8 lanes;
>> + bool is_tps3;
>> + bool is_tps4;
>> +};
>> +
>> +struct hibmc_dp_link {
>> + struct link_status status;
>> + u8 *train_set;
>> + struct link_cap cap;
>> +};
>> +
>> +struct dp_dev {
>> + struct hibmc_dp_link link;
>> + struct drm_dp_aux aux;
>> + struct drm_device *dev;
>> + void __iomem *base;
>> + u8 dpcd[DP_RECEIVER_CAP_SIZE];
>> +};
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h
>> new file mode 100644
>> index 000000000000..3dcb847057a4
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h
>> @@ -0,0 +1,76 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/* Copyright (c) 2024 Hisilicon Limited. */
>> +
>> +#ifndef DP_REG_H
>> +#define DP_REG_H
>> +
>> +#define DP_AUX_CMD_ADDR 0x50
>> +#define DP_AUX_WR_DATA0 0x54
>> +#define DP_AUX_WR_DATA1 0x58
>> +#define DP_AUX_WR_DATA2 0x5c
>> +#define DP_AUX_WR_DATA3 0x60
>> +#define DP_AUX_RD_DATA0 0x64
>> +#define DP_AUX_REQ 0x74
>> +#define DP_AUX_STATUS 0x78
>> +#define DP_PHYIF_CTRL0 0xa0
>> +#define DP_VIDEO_CTRL 0x100
>> +#define DP_VIDEO_CONFIG0 0x104
>> +#define DP_VIDEO_CONFIG1 0x108
>> +#define DP_VIDEO_CONFIG2 0x10c
>> +#define DP_VIDEO_CONFIG3 0x110
>> +#define DP_VIDEO_PACKET 0x114
>> +#define DP_VIDEO_MSA0 0x118
>> +#define DP_VIDEO_MSA1 0x11c
>> +#define DP_VIDEO_MSA2 0x120
>> +#define DP_VIDEO_HORIZONTAL_SIZE 0X124
>> +#define DP_TIMING_GEN_CONFIG0 0x26c
>> +#define DP_TIMING_GEN_CONFIG2 0x274
>> +#define DP_TIMING_GEN_CONFIG3 0x278
>> +#define DP_HDCP_CFG 0x600
>> +#define DP_INTR_ENABLE 0x720
>> +#define DP_INTR_ORIGINAL_STATUS 0x728
>> +#define DP_DPTX_RST_CTRL 0x700
>> +#define DP_DPTX_CLK_CTRL 0x704
>> +#define DP_DPTX_GCTL0 0x708
>> +#define DP_TIMING_MODEL_CTRL 0x884
>> +#define DP_TIMING_SYNC_CTRL 0xFF0
>> +
>> +#define DP_CFG_AUX_SYNC_LEN_SEL BIT(1)
>> +#define DP_CFG_AUX_TIMER_TIMEOUT BIT(2)
>> +#define DP_CFG_STREAM_FRAME_MODE BIT(6)
>> +#define DP_CFG_AUX_MIN_PULSE_NUM GENMASK(13, 9)
>> +#define DP_CFG_LANE_DATA_EN GENMASK(11, 8)
>> +#define DP_CFG_PHY_LANE_NUM GENMASK(2, 1)
>> +#define DP_CFG_AUX_REQ BIT(0)
>> +#define DP_CFG_AUX_RST_N BIT(4)
>> +#define DP_CFG_AUX_TIMEOUT BIT(0)
>> +#define DP_CFG_AUX_READY_DATA_BYTE GENMASK(16, 12)
>> +#define DP_CFG_AUX GENMASK(24, 17)
>> +#define DP_CFG_AUX_STATUS GENMASK(11, 4)
>> +#define DP_CFG_SCRAMBLE_EN BIT(0)
>> +#define DP_CFG_PAT_SEL GENMASK(7, 4)
>> +#define DP_CFG_TIMING_GEN0_HACTIVE GENMASK(31, 16)
>> +#define DP_CFG_TIMING_GEN0_HBLANK GENMASK(15, 0)
>> +#define DP_CFG_TIMING_GEN0_VACTIVE GENMASK(31, 16)
>> +#define DP_CFG_TIMING_GEN0_VBLANK GENMASK(15, 0)
>> +#define DP_CFG_TIMING_GEN0_VFRONT_PORCH GENMASK(31, 16)
>> +#define DP_CFG_STREAM_HACTIVE GENMASK(31, 16)
>> +#define DP_CFG_STREAM_HBLANK GENMASK(15, 0)
>> +#define DP_CFG_STREAM_HSYNC_WIDTH GENMASK(15, 0)
>> +#define DP_CFG_STREAM_VACTIVE GENMASK(31, 16)
>> +#define DP_CFG_STREAM_VBLANK GENMASK(15, 0)
>> +#define DP_CFG_STREAM_VFRONT_PORCH GENMASK(31, 16)
>> +#define DP_CFG_STREAM_VSYNC_WIDTH GENMASK(15, 0)
>> +#define DP_CFG_STREAM_VSTART GENMASK(31, 16)
>> +#define DP_CFG_STREAM_HSTART GENMASK(15, 0)
>> +#define DP_CFG_STREAM_VSYNC_POLARITY BIT(8)
>> +#define DP_CFG_STREAM_HSYNC_POLARITY BIT(7)
>> +#define DP_CFG_STREAM_RGB_ENABLE BIT(1)
>> +#define DP_CFG_STREAM_VIDEO_MAPPING GENMASK(5, 2)
>> +#define DP_CFG_PIXEL_NUM_TIMING_MODE_SEL1 GENMASK(31, 16)
>> +#define DP_CFG_STREAM_TU_SYMBOL_SIZE GENMASK(5, 0)
>> +#define DP_CFG_STREAM_TU_SYMBOL_FRAC_SIZE GENMASK(9, 6)
>> +#define DP_CFG_STREAM_HTOTAL_SIZE GENMASK(31, 16)
>> +#define DP_CFG_STREAM_HBLANK_SIZE GENMASK(15, 0)
>> +
>> +#endif
>> --
>> 2.33.0
>>
Powered by blists - more mailing lists