linux-kernel - ubifs_recover_master_node: failed to recover master node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <826c4456-461c-424b-88de-a36e77fd7475@alliedtelesis.co.nz>
Date: Tue, 29 Oct 2024 13:38:47 +1300
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
 Miquel Raynal <miquel.raynal@...tlin.com>,
 "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>
Cc: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: ubifs_recover_master_node: failed to recover master node

(resend as plaintext)

Hi,

I recently added support for the SPI-NAND controller on the RTL9302C 
SoC[1]. I did most of the work against Linux 6.11 and it's working fine 
there. I recently rebased against the tip of Linus's tree (6.12-rc5) and 
found I was getting ubifs errors when mounting:

[    1.255191] spi-nand spi1.0: Macronix SPI NAND was found.
[    1.261283] spi-nand spi1.0: 256 MiB, block size: 128 KiB, page size: 
2048, OOB size: 64
[    1.271134] 2 fixed-partitions partitions found on MTD device spi1.0
[    1.278247] Creating 2 MTD partitions on "spi1.0":
[    1.283631] 0x000000000000-0x00000f000000 : "user"
[   20.481108] 0x00000f000000-0x000010000000 : "Reserved"
[   72.240347] ubi0: scanning is finished
[   72.270577] ubi0: attached mtd3 (name "user", size 240 MiB)
[   72.276815] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 
bytes
[   72.284537] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[   72.292132] ubi0: VID header offset: 2048 (aligned 2048), data 
offset: 4096
[   72.299885] ubi0: good PEBs: 1920, bad PEBs: 0, corrupted PEBs: 0
[   72.306689] ubi0: user volume: 1, internal volumes: 1, max. volumes 
count: 128
[   72.314747] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, 
image sequence number: 252642230
[   72.324850] ubi0: available PEBs: 0, total reserved PEBs: 1920, PEBs 
reserved for bad PEB handling: 40
[   72.370123] ubi0: background thread "ubi_bgt0d" started, PID 141
[   72.470740] UBIFS (ubi0:0): Mounting in unauthenticated mode
[   72.490246] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, 
PID 144
[   72.528272] UBIFS error (ubi0:0 pid 143): ubifs_recover_master_node: 
failed to recover master node
[   72.550122] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops
[   72.710720] UBIFS (ubi0:0): Mounting in unauthenticated mode
[   72.717447] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, 
PID 149
[   72.777602] UBIFS error (ubi0:0 pid 148): ubifs_recover_master_node: 
failed to recover master node
[   72.787792] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops

Full dmesg output is at[2]

git bisect lead me to commit 11813857864f ("mtd: spi-nand: macronix: 
Continuous read support"). Reverting the blamed commit from 6.12-rc5 
seems to avoid the problem. The flash chip on my board is a 
MX30LF2G28AD-TI. I'm not sure if there is a problem with 11813857864f or 
with my spi-mem driver that is exposed after support for continuous read 
is enabled.

Thanks,
Chris

--

[1] - 
https://lore.kernel.org/all/20241015225434.3970360-1-chris.packham@alliedtelesis.co.nz/
[2] - 
https://gist.github.com/cpackham-atlnz/66a0843362e8f8eb2c4f5c7ed01c5efe