[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <60dbaa12-68da-4485-ab75-b3fa8b93d06a@kontron.de>
Date: Wed, 30 Oct 2024 08:44:27 +0100
From: Frieder Schrempf <frieder.schrempf@...tron.de>
To: Frank Li <Frank.Li@....com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <imx@...ts.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/1] arm64: dts: imx8mp-kontron-dl: change touchscreen
power-supply to AVDD28-supply
On 23.10.24 5:26 PM, Frank Li wrote:
> Update the touchscreen power-supply from 'power-supply' to 'AVDD28-supply' and
> 'VDDIO-supply' as per the binding documentation in goodix.yaml.
>
> Fix below warning:
> arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtb: touchscreen@5d:
> 'power-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml
>
> Signed-off-by: Frank Li <Frank.Li@....com>
Thanks for the fix!
Reviewed-by: Frieder Schrempf <frieder.schrempf@...tron.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> index 134bdf156607c..a3cba41d2b531 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> @@ -80,7 +80,8 @@ touchscreen@5d {
> interrupt-parent = <&gpio1>;
> interrupts = <6 8>;
> irq-gpios = <&gpio1 6 0>;
> - power-supply = <®_vcc_panel>;
> + AVDD28-supply = <®_vcc_panel>;
> + VDDIO-supply = <®_vcc_panel>;
> reset-gpios = <&gpio1 7 0>;
> };
> };
Powered by blists - more mailing lists