[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAPybu_2eeUCPgeg9-D9DRTFgZXDRMwwrwfeW29_yr8Se50+gGA@mail.gmail.com>
Date: Wed, 30 Oct 2024 12:36:13 +0100
From: Ricardo Ribalda Delgado <ribalda@...nel.org>
To: git@...tzsch.eu
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>, Sakari Ailus <sakari.ailus@...ux.intel.com>,
~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Dave Stevenson <dave.stevenson@...pberrypi.com>
Subject: Re: [PATCH v2 02/13] media: i2c: imx214: Use subdev active state
Hi
It looks good to me, but I would like Sakari to review it. I am not
sure if it is ok to keep the cur_mode variable.
On Mon, Oct 21, 2024 at 12:14 AM André Apitzsch via B4 Relay
<devnull+git.apitzsch.eu@...nel.org> wrote:
>
> From: André Apitzsch <git@...tzsch.eu>
>
> Port the imx214 sensor driver to use the subdev active state.
>
> Move all the format configuration to the subdevice state and simplify
> the format handling, locking and initialization.
>
> While at it, simplify imx214_start_streaming() by removing unneeded goto
> statements and the corresponding error label.
>
> Signed-off-by: André Apitzsch <git@...tzsch.eu>
> ---
> drivers/media/i2c/imx214.c | 159 +++++++++++++++------------------------------
> 1 file changed, 53 insertions(+), 106 deletions(-)
>
> diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
> index 5d411452d342fdb177619cd1c9fd9650d31089bb..990fd0811904fc478c05d64054089fc2879cae94 100644
> --- a/drivers/media/i2c/imx214.c
> +++ b/drivers/media/i2c/imx214.c
> @@ -59,8 +59,6 @@ struct imx214 {
>
> struct v4l2_subdev sd;
> struct media_pad pad;
> - struct v4l2_mbus_framefmt fmt;
> - struct v4l2_rect crop;
>
> struct v4l2_ctrl_handler ctrls;
> struct v4l2_ctrl *pixel_rate;
> @@ -68,15 +66,11 @@ struct imx214 {
> struct v4l2_ctrl *exposure;
> struct v4l2_ctrl *unit_size;
>
> + const struct imx214_mode *cur_mode;
> +
> struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
>
> struct gpio_desc *enable_gpio;
> -
> - /*
> - * Serialize control access, get/set format, get selection
> - * and start streaming.
> - */
> - struct mutex mutex;
> };
>
> struct reg_8 {
> @@ -490,6 +484,22 @@ static int __maybe_unused imx214_power_off(struct device *dev)
> return 0;
> }
>
> +static void imx214_update_pad_format(struct imx214 *imx214,
> + const struct imx214_mode *mode,
> + struct v4l2_mbus_framefmt *fmt, u32 code)
> +{
> + fmt->code = IMX214_MBUS_CODE;
> + fmt->width = mode->width;
> + fmt->height = mode->height;
> + fmt->field = V4L2_FIELD_NONE;
> + fmt->colorspace = V4L2_COLORSPACE_SRGB;
> + fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> + fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> + fmt->colorspace,
> + fmt->ycbcr_enc);
> + fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> +}
> +
> static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_mbus_code_enum *code)
> @@ -549,52 +559,6 @@ static const struct v4l2_subdev_core_ops imx214_core_ops = {
> #endif
> };
>
> -static struct v4l2_mbus_framefmt *
> -__imx214_get_pad_format(struct imx214 *imx214,
> - struct v4l2_subdev_state *sd_state,
> - unsigned int pad,
> - enum v4l2_subdev_format_whence which)
> -{
> - switch (which) {
> - case V4L2_SUBDEV_FORMAT_TRY:
> - return v4l2_subdev_state_get_format(sd_state, pad);
> - case V4L2_SUBDEV_FORMAT_ACTIVE:
> - return &imx214->fmt;
> - default:
> - return NULL;
> - }
> -}
> -
> -static int imx214_get_format(struct v4l2_subdev *sd,
> - struct v4l2_subdev_state *sd_state,
> - struct v4l2_subdev_format *format)
> -{
> - struct imx214 *imx214 = to_imx214(sd);
> -
> - mutex_lock(&imx214->mutex);
> - format->format = *__imx214_get_pad_format(imx214, sd_state,
> - format->pad,
> - format->which);
> - mutex_unlock(&imx214->mutex);
> -
> - return 0;
> -}
> -
> -static struct v4l2_rect *
> -__imx214_get_pad_crop(struct imx214 *imx214,
> - struct v4l2_subdev_state *sd_state,
> - unsigned int pad, enum v4l2_subdev_format_whence which)
> -{
> - switch (which) {
> - case V4L2_SUBDEV_FORMAT_TRY:
> - return v4l2_subdev_state_get_crop(sd_state, pad);
> - case V4L2_SUBDEV_FORMAT_ACTIVE:
> - return &imx214->crop;
> - default:
> - return NULL;
> - }
> -}
> -
> static int imx214_set_format(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_format *format)
> @@ -604,34 +568,25 @@ static int imx214_set_format(struct v4l2_subdev *sd,
> struct v4l2_rect *__crop;
> const struct imx214_mode *mode;
>
> - mutex_lock(&imx214->mutex);
> -
> - __crop = __imx214_get_pad_crop(imx214, sd_state, format->pad,
> - format->which);
> -
> mode = v4l2_find_nearest_size(imx214_modes,
> ARRAY_SIZE(imx214_modes), width, height,
> format->format.width,
> format->format.height);
>
> - __crop->width = mode->width;
> - __crop->height = mode->height;
> + imx214_update_pad_format(imx214, mode, &format->format, format->format.code);
> + __format = v4l2_subdev_state_get_format(sd_state, 0);
>
> - __format = __imx214_get_pad_format(imx214, sd_state, format->pad,
> - format->which);
> - __format->width = __crop->width;
> - __format->height = __crop->height;
> - __format->code = IMX214_MBUS_CODE;
> - __format->field = V4L2_FIELD_NONE;
> - __format->colorspace = V4L2_COLORSPACE_SRGB;
> - __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
> - __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> - __format->colorspace, __format->ycbcr_enc);
> - __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
> + if (imx214->cur_mode == mode && __format->code == format->format.code)
> + return 0;
>
Isnt' if (imx214->cur_mode == mode) enough?
> - format->format = *__format;
> + *__format = format->format;
>
> - mutex_unlock(&imx214->mutex);
> + __crop = v4l2_subdev_state_get_crop(sd_state, 0);
> + __crop->width = mode->width;
> + __crop->height = mode->height;
> +
> + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
> + imx214->cur_mode = mode;
>
> return 0;
> }
> @@ -640,14 +595,9 @@ static int imx214_get_selection(struct v4l2_subdev *sd,
> struct v4l2_subdev_state *sd_state,
> struct v4l2_subdev_selection *sel)
> {
> - struct imx214 *imx214 = to_imx214(sd);
> -
> switch (sel->target) {
> case V4L2_SEL_TGT_CROP:
> - mutex_lock(&imx214->mutex);
> - sel->r = *__imx214_get_pad_crop(imx214, sd_state, sel->pad,
> - sel->which);
> - mutex_unlock(&imx214->mutex);
> + sel->r = *v4l2_subdev_state_get_crop(sd_state, 0);
> return 0;
>
> case V4L2_SEL_TGT_NATIVE_SIZE:
> @@ -826,40 +776,28 @@ static int imx214_write_table(struct imx214 *imx214,
>
> static int imx214_start_streaming(struct imx214 *imx214)
> {
> - const struct imx214_mode *mode;
> int ret;
>
> - mutex_lock(&imx214->mutex);
> ret = imx214_write_table(imx214, mode_table_common);
> if (ret < 0) {
> dev_err(imx214->dev, "could not sent common table %d\n", ret);
> - goto error;
> + return ret;
> }
>
> - mode = v4l2_find_nearest_size(imx214_modes,
> - ARRAY_SIZE(imx214_modes), width, height,
> - imx214->fmt.width, imx214->fmt.height);
> - ret = imx214_write_table(imx214, mode->reg_table);
> + ret = imx214_write_table(imx214, imx214->cur_mode->reg_table);
> if (ret < 0) {
> dev_err(imx214->dev, "could not sent mode table %d\n", ret);
> - goto error;
> + return ret;
> }
> ret = __v4l2_ctrl_handler_setup(&imx214->ctrls);
> if (ret < 0) {
> dev_err(imx214->dev, "could not sync v4l2 controls\n");
> - goto error;
> + return ret;
> }
> ret = regmap_write(imx214->regmap, IMX214_REG_MODE_SELECT, IMX214_MODE_STREAMING);
> - if (ret < 0) {
> + if (ret < 0)
> dev_err(imx214->dev, "could not sent start table %d\n", ret);
> - goto error;
> - }
>
> - mutex_unlock(&imx214->mutex);
> - return 0;
> -
> -error:
> - mutex_unlock(&imx214->mutex);
> return ret;
> }
>
> @@ -877,6 +815,7 @@ static int imx214_stop_streaming(struct imx214 *imx214)
> static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> {
> struct imx214 *imx214 = to_imx214(subdev);
> + struct v4l2_subdev_state *state;
> int ret;
>
> if (enable) {
> @@ -884,7 +823,9 @@ static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
> if (ret < 0)
> return ret;
>
> + state = v4l2_subdev_lock_and_get_active_state(subdev);
> ret = imx214_start_streaming(imx214);
> + v4l2_subdev_unlock_state(state);
> if (ret < 0)
> goto err_rpm_put;
> } else {
> @@ -948,7 +889,7 @@ static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
> .enum_mbus_code = imx214_enum_mbus_code,
> .enum_frame_size = imx214_enum_frame_size,
> .enum_frame_interval = imx214_enum_frame_interval,
> - .get_fmt = imx214_get_format,
> + .get_fmt = v4l2_subdev_get_fmt,
> .set_fmt = imx214_set_format,
> .get_selection = imx214_get_selection,
> .get_frame_interval = imx214_get_frame_interval,
> @@ -1079,13 +1020,13 @@ static int imx214_probe(struct i2c_client *client)
> pm_runtime_enable(imx214->dev);
> pm_runtime_idle(imx214->dev);
>
> + /* Set default mode to max resolution */
> + imx214->cur_mode = &imx214_modes[0];
> +
> ret = imx214_ctrls_init(imx214);
> if (ret < 0)
> goto error_power_off;
>
> - mutex_init(&imx214->mutex);
> - imx214->ctrls.lock = &imx214->mutex;
> -
> imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
> imx214->sd.dev = &client->dev;
> @@ -1097,20 +1038,27 @@ static int imx214_probe(struct i2c_client *client)
> goto free_ctrl;
> }
>
> - imx214_entity_init_state(&imx214->sd, NULL);
> + imx214->sd.state_lock = imx214->ctrls.lock;
> + ret = v4l2_subdev_init_finalize(&imx214->sd);
> + if (ret < 0) {
> + dev_err(dev, "subdev init error: %d\n", ret);
> + goto free_entity;
> + }
>
> ret = v4l2_async_register_subdev_sensor(&imx214->sd);
> if (ret < 0) {
> dev_err(dev, "could not register v4l2 device\n");
> - goto free_entity;
> + goto error_subdev_cleanup;
> }
>
> return 0;
>
> +error_subdev_cleanup:
> + v4l2_subdev_cleanup(&imx214->sd);
> +
> free_entity:
> media_entity_cleanup(&imx214->sd.entity);
> free_ctrl:
> - mutex_destroy(&imx214->mutex);
> v4l2_ctrl_handler_free(&imx214->ctrls);
> error_power_off:
> pm_runtime_disable(imx214->dev);
> @@ -1125,13 +1073,12 @@ static void imx214_remove(struct i2c_client *client)
> struct imx214 *imx214 = to_imx214(sd);
>
> v4l2_async_unregister_subdev(&imx214->sd);
> + v4l2_subdev_cleanup(sd);
> media_entity_cleanup(&imx214->sd.entity);
> v4l2_ctrl_handler_free(&imx214->ctrls);
>
> pm_runtime_disable(&client->dev);
> pm_runtime_set_suspended(&client->dev);
> -
> - mutex_destroy(&imx214->mutex);
> }
>
> static const struct of_device_id imx214_of_match[] = {
>
> --
> 2.47.0
>
>
Powered by blists - more mailing lists