| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241030-ad7380-add-adaq4380-4-support-v4-1-864ff02babae@baylibre.com>
Date: Wed, 30 Oct 2024 14:44:25 +0100
From: Julien Stephan <jstephan@...libre.com>
To: Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
David Lechner <dlechner@...libre.com>, Jonathan Cameron <jic23@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Jonathan Corbet <corbet@....net>
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-doc@...r.kernel.org,
Julien Stephan <jstephan@...libre.com>,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v4 1/5] dt-bindings: iio: adc: ad7380: add adaq4370-4 and
adaq4380-4 compatible parts
adaq4370-4 (2MSPS) and adaq4380-4 (4MSPS) are quad-channel precision data
acquisition signal chain μModule solutions compatible with the ad738x
family, with the following differences:
- pin selectable gain in front of each 4 adc
- internal reference is 3V derived from refin-supply (5V)
- additional supplies
To select the gain a new patternProperties is added to describe each
channel. It is restricted to adaq devices.
Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
Signed-off-by: Julien Stephan <jstephan@...libre.com>
---
.../devicetree/bindings/iio/adc/adi,ad7380.yaml | 120 +++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index 0065d650882489e21b952bb9fb25f1e3a070ee68..ada08005b3cd1ce7ba13f96484a33fdee0e83a1c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -25,6 +25,8 @@ description: |
* https://www.analog.com/en/products/ad7386-4.html
* https://www.analog.com/en/products/ad7387-4.html
* https://www.analog.com/en/products/ad7388-4.html
+ * https://www.analog.com/en/products/adaq4370-4.html
+ * https://www.analog.com/en/products/adaq4380-4.html
$ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -46,6 +48,8 @@ properties:
- adi,ad7386-4
- adi,ad7387-4
- adi,ad7388-4
+ - adi,adaq4370-4
+ - adi,adaq4380-4
reg:
maxItems: 1
@@ -70,6 +74,20 @@ properties:
refin-supply:
description:
A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+ For adaq devices, a 5V supply voltage. A 3.3V internal reference is
+ derived from it. Connect to vs-p-supply for normal operation.
+
+ vs-p-supply:
+ description:
+ Amplifiers positive supply.
+
+ vs-n-supply:
+ description:
+ Amplifiers negative supply.
+
+ ldo-supply:
+ description:
+ LDO supply. Connect to vs-p-supply or a 3.6 to 5.5 V supply.
aina-supply:
description:
@@ -97,12 +115,45 @@ properties:
specify the ALERT interrupt.
maxItems: 1
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
required:
- compatible
- reg
- vcc-supply
- vlogic-supply
+patternProperties:
+ "^channel@[0-3]$":
+ $ref: adc.yaml
+ type: object
+
+ properties:
+ reg:
+ description:
+ The channel number. From 0 to 3 corresponding to channels A,B,C,D
+ minimum: 0
+ maximum: 3
+
+ adi,gain-milli:
+ description:
+ The hardware gain applied to the ADC input (in milli units).
+ If not present, default to 1000 (no actual gain applied).
+ Refer to the typical connection diagrams section of the datasheet for
+ pin wiring.
+ $ref: /schemas/types.yaml#/definitions/uint16
+ enum: [300, 600, 1000, 1600]
+ default: 1000
+
+ required:
+ - reg
+
+ additionalProperties: false
+
unevaluatedProperties: false
allOf:
@@ -140,6 +191,7 @@ allOf:
aind-supply: false
# ad7380-4 uses refin-supply as external reference.
+ # adaq devices use internal reference only, derived from refin-supply
# All other chips from ad738x family use refio as optional external reference.
# When refio-supply is omitted, internal reference is used.
- if:
@@ -147,6 +199,8 @@ allOf:
compatible:
enum:
- adi,ad7380-4
+ - adi,adaq4370-4
+ - adi,adaq4380-4
then:
properties:
refio-supply: false
@@ -156,6 +210,27 @@ allOf:
properties:
refin-supply: false
+ # adaq devices need more supplies and using channel to declare gain property
+ # only applies to adaq devices
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,adaq4370-4
+ - adi,adaq4380-4
+ then:
+ required:
+ - vs-p-supply
+ - vs-n-supply
+ - ldo-supply
+ else:
+ properties:
+ vs-p-supply: false
+ vs-n-supply: false
+ ldo-supply: false
+ patternProperties:
+ "^channel@[0-3]$": false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
@@ -180,3 +255,48 @@ examples:
refio-supply = <&supply_2_5V>;
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,adaq4380-4";
+ reg = <0>;
+
+ spi-cpol;
+ spi-cpha;
+ spi-max-frequency = <80000000>;
+
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio0>;
+
+ vcc-supply = <&supply_3_3V>;
+ vlogic-supply = <&supply_3_3V>;
+ refin-supply = <&supply_5V>;
+ vs-p-supply = <&supply_5V>;
+ vs-n-supply = <&supply_0V>;
+ ldo-supply = <&supply_5V>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ adi,gain-milli = /bits/ 16 <300>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ adi,gain-milli = /bits/ 16 <600>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ adi,gain-milli = /bits/ 16 <1000>;
+ };
+ };
+ };
--
2.47.0
Powered by blists - more mailing lists