[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241030140535.000009ca@Huawei.com>
Date: Wed, 30 Oct 2024 14:05:35 +0000
From: Jonathan Cameron <Jonathan.Cameron@...wei.com>
To: <ira.weiny@...el.com>
CC: Dave Jiang <dave.jiang@...el.com>, Fan Ni <fan.ni@...sung.com>, "Navneet
Singh" <navneet.singh@...el.com>, Jonathan Corbet <corbet@....net>, "Andrew
Morton" <akpm@...ux-foundation.org>, Dan Williams <dan.j.williams@...el.com>,
Davidlohr Bueso <dave@...olabs.net>, "Alison Schofield"
<alison.schofield@...el.com>, Vishal Verma <vishal.l.verma@...el.com>,
<linux-cxl@...r.kernel.org>, <linux-doc@...r.kernel.org>,
<nvdimm@...ts.linux.dev>, <linux-kernel@...r.kernel.org>, Kees Cook
<kees@...nel.org>, "Gustavo A. R. Silva" <gustavoars@...nel.org>,
<linux-hardening@...r.kernel.org>
Subject: Re: [PATCH v5 08/27] cxl/mem: Read dynamic capacity configuration
from the device
On Tue, 29 Oct 2024 15:34:43 -0500
ira.weiny@...el.com wrote:
> From: Navneet Singh <navneet.singh@...el.com>
>
> Devices which optionally support Dynamic Capacity (DC) are configured
> via mailbox commands. CXL 3.1 requires the host to issue the Get DC
> Configuration command in order to properly configure DCDs. Without the
> Get DC Configuration command DCD can't be supported.
>
> Implement the DC mailbox commands as specified in CXL 3.1 section
> 8.2.9.9.9 (opcodes 48XXh) to read and store the DCD configuration
> information. Disable DCD if DCD is not supported. Leverage the Get DC
> Configuration command supported bit to indicate if DCD is supported.
>
> Linux has no use for the trailing fields of the Get Dynamic Capacity
> Configuration Output Payload (Total number of supported extents, number
> of available extents, total number of supported tags, and number of
> available tags). Avoid defining those fields to use the more useful
> dynamic C array.
>
> Cc: Li, Ming <ming4.li@...el.com>
> Cc: Kees Cook <kees@...nel.org>
> Cc: Gustavo A. R. Silva <gustavoars@...nel.org>
> Cc: linux-hardening@...r.kernel.org
> Signed-off-by: Navneet Singh <navneet.singh@...el.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
> Co-developed-by: Ira Weiny <ira.weiny@...el.com>
> Signed-off-by: Ira Weiny <ira.weiny@...el.com>
I'll assume you'll fix the typo the bot found.
> +
> +/* See CXL 3.1 Table 8-164 get dynamic capacity config Output Payload */
> +struct cxl_mbox_get_dc_config_out {
> + u8 avail_region_count;
> + u8 regions_returned;
> + u8 rsvd[6];
> + /* See CXL 3.1 Table 8-165 */
> + struct cxl_dc_region_config {
> + __le64 region_base;
> + __le64 region_decode_length;
> + __le64 region_length;
> + __le64 region_block_size;
> + __le32 region_dsmad_handle;
> + u8 flags;
> + u8 rsvd[3];
> + } __packed region[] __counted_by(regions_retunred);
returned
> + /* Trailing fields unused */
> +} __packed;
Powered by blists - more mailing lists