[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ag3wqsjdec7ujcba2jpvhzgcbbc5vnyjyes5ljyyf5b4edw7j3@rj23a25wvoyd>
Date: Thu, 31 Oct 2024 19:57:58 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Jishnu Prakash <quic_jprakash@...cinc.com>
Cc: jic23@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, agross@...nel.org, andersson@...nel.org,
konrad.dybcio@...aro.org, daniel.lezcano@...aro.org, sboyd@...nel.org,
quic_subbaram@...cinc.com, quic_collinsd@...cinc.com, quic_amelende@...cinc.com,
quic_kamalw@...cinc.com, amitk@...nel.org, lee@...nel.org, rafael@...nel.org,
rui.zhang@...el.com, lukasz.luba@....com, lars@...afoo.de, quic_skakitap@...cinc.com,
neil.armstrong@...aro.org, devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
cros-qcom-dts-watchers@...omium.org
Subject: Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5
Gen3 ADC
On Thu, Oct 31, 2024 at 12:28:52AM +0530, Jishnu Prakash wrote:
> For the PMIC5-Gen3 type PMICs, ADC peripheral is present in HW for the
> following PMICs: PMK8550, PM8550, PM8550B and PM8550VX PMICs.
>
> It is similar to PMIC5-Gen2, with SW communication to ADCs on all PMICs
> going through PBS(Programmable Boot Sequence) firmware through a single
> register interface. This interface is implemented on an SDAM (Shared
> Direct Access Memory) peripheral on the master PMIC PMK8550 rather
> than a dedicated ADC peripheral.
>
> Add documentation for PMIC5 Gen3 ADC and macro definitions for ADC
> channels and virtual channels (combination of ADC channel number and
> PMIC SID number) per PMIC, to be used by clients of this device.
>
> Co-developed-by: Anjelique Melendez <quic_amelende@...cinc.com>
> Signed-off-by: Anjelique Melendez <quic_amelende@...cinc.com>
> Signed-off-by: Jishnu Prakash <quic_jprakash@...cinc.com>
> ---
> Changes since v3:
> - Added ADC5 Gen3 documentation changes in existing qcom,spmi-vadc.yaml file
> instead of adding separate file and updated top-level constraints in documentation
> file based on discussion with reviewers.
I think it has been better, when it was a separate file. Krzysztof asked
for rationale, not for merging it back. Two different things.
> - Dropped default SID definitions.
> - Addressed other reviewer comments.
>
> Changes since v2:
> - Moved ADC5 Gen3 documentation into a separate new file.
>
> Changes since v1:
> - Updated properties separately for all compatibles to clarify usage
> of new properties and updates in usage of old properties for ADC5 Gen3.
> - Avoided updating 'adc7' name to 'adc5 gen2' and just left a comment
> mentioning this convention.
> - Used predefined channel IDs in individual PMIC channel definitions
> instead of numeric IDs.
> - Addressed other comments from reviewers.
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists