[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241031200431.182443-1-steve.wahl@hpe.com>
Date: Thu, 31 Oct 2024 15:04:31 -0500
From: Steve Wahl <steve.wahl@....com>
To: Steve Wahl <steve.wahl@....com>, Ingo Molnar <mingo@...hat.com>,
Peter Zijlstra <peterz@...radead.org>,
Juri Lelli <juri.lelli@...hat.com>,
Vincent Guittot <vincent.guittot@...aro.org>,
Dietmar Eggemann <dietmar.eggemann@....com>,
Steven Rostedt <rostedt@...dmis.org>, Ben Segall <bsegall@...gle.com>,
Mel Gorman <mgorman@...e.de>, Valentin Schneider <vschneid@...hat.com>,
linux-kernel@...r.kernel.org, K Prateek Nayak <kprateek.nayak@....com>,
Vishal Chourasia <vishalc@...ux.ibm.com>, samir <samir@...ux.ibm.com>
Cc: Russ Anderson <rja@....com>, Dimitri Sivanich <sivanich@....com>
Subject: [PATCH v2] sched/topology: improve topology_span_sane speed
Use a different approach to topology_span_sane(), that checks for the
same constraint of no partial overlaps for any two CPU sets for
non-NUMA topology levels, but does so in a way that is O(N) rather
than O(N^2).
Instead of comparing with all other masks to detect collisions, keep
one mask that includes all CPUs seen so far and detect collisions with
a single cpumask_intersects test.
If the current mask has no collisions with previously seen masks, it
should be a new mask, which can be uniquely identified ("id") by the
lowest bit set in this mask. Mark that we've seen a mask with this
id, and add the CPUs in this mask to the list of those seen.
If the current mask does collide with previously seen masks, it should
be exactly equal to a mask seen before, identified once again by the
lowest bit the current mask has set. It's an error if we haven't seen
a mask with that id, or if the current mask doesn't match the one we
get by looking up that id.
Move the topology_span_sane() check out of the existing topology level
loop, let it do its own looping to match the needs of this algorithm.
On a system with 1920 processors (16 sockets, 60 cores, 2 threads),
the average time to take one processor offline is reduced from 2.18
seconds to 1.01 seconds. (Off-lining 959 of 1920 processors took
34m49.765s without this change, 16m10.038s with this change in place.)
Signed-off-by: Steve Wahl <steve.wahl@....com>
---
Version 2: Adopted suggestion by K Prateek Nayak that removes an array and
simplifies the code, and eliminates the erroneous use of
num_possible_cpus() that Peter Zijlstra noted.
Version 1 discussion:
https://lore.kernel.org/all/20241010155111.230674-1-steve.wahl@hpe.com/
kernel/sched/topology.c | 73 +++++++++++++++++++++++++++--------------
1 file changed, 48 insertions(+), 25 deletions(-)
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index 9748a4c8d668..6a2a3e91d59e 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -2356,35 +2356,58 @@ static struct sched_domain *build_sched_domain(struct sched_domain_topology_leve
/*
* Ensure topology masks are sane, i.e. there are no conflicts (overlaps) for
- * any two given CPUs at this (non-NUMA) topology level.
+ * any two given CPUs on non-NUMA topology levels.
*/
-static bool topology_span_sane(struct sched_domain_topology_level *tl,
- const struct cpumask *cpu_map, int cpu)
+static bool topology_span_sane(const struct cpumask *cpu_map)
{
- int i = cpu + 1;
+ struct sched_domain_topology_level *tl;
+ struct cpumask *covered, *id_seen;
+ int cpu;
- /* NUMA levels are allowed to overlap */
- if (tl->flags & SDTL_OVERLAP)
- return true;
+ lockdep_assert_held(&sched_domains_mutex);
+ covered = sched_domains_tmpmask;
+ id_seen = sched_domains_tmpmask2;
+
+ for_each_sd_topology(tl) {
+
+ /* NUMA levels are allowed to overlap */
+ if (tl->flags & SDTL_OVERLAP)
+ continue;
+
+ cpumask_clear(covered);
+ cpumask_clear(id_seen);
- /*
- * Non-NUMA levels cannot partially overlap - they must be either
- * completely equal or completely disjoint. Otherwise we can end up
- * breaking the sched_group lists - i.e. a later get_group() pass
- * breaks the linking done for an earlier span.
- */
- for_each_cpu_from(i, cpu_map) {
/*
- * We should 'and' all those masks with 'cpu_map' to exactly
- * match the topology we're about to build, but that can only
- * remove CPUs, which only lessens our ability to detect
- * overlaps
+ * Non-NUMA levels cannot partially overlap - they must be either
+ * completely equal or completely disjoint. Otherwise we can end up
+ * breaking the sched_group lists - i.e. a later get_group() pass
+ * breaks the linking done for an earlier span.
*/
- if (!cpumask_equal(tl->mask(cpu), tl->mask(i)) &&
- cpumask_intersects(tl->mask(cpu), tl->mask(i)))
- return false;
+ for_each_cpu(cpu, cpu_map) {
+ const struct cpumask *tl_cpu_mask = tl->mask(cpu);
+ int id;
+
+ /* lowest bit set in this mask is used as a unique id */
+ id = cpumask_first(tl_cpu_mask);
+
+ /* if this mask doesn't collide with what we've already seen */
+ if (!cpumask_intersects(tl_cpu_mask, covered)) {
+ /* Really odd case when cpu != id, likely not sane */
+ if ((cpu != id) && !cpumask_equal(tl_cpu_mask, tl->mask(id)))
+ return false;
+ if (cpumask_test_and_set_cpu(id, id_seen))
+ return false;
+ cpumask_or(covered, tl_cpu_mask, covered);
+ } else if ((!cpumask_test_cpu(id, id_seen)) ||
+ !cpumask_equal(tl->mask(id), tl_cpu_mask)) {
+ /*
+ * a collision with covered should have exactly matched
+ * a previously seen mask with the same id
+ */
+ return false;
+ }
+ }
}
-
return true;
}
@@ -2417,9 +2440,6 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
sd = NULL;
for_each_sd_topology(tl) {
- if (WARN_ON(!topology_span_sane(tl, cpu_map, i)))
- goto error;
-
sd = build_sched_domain(tl, cpu_map, attr, sd, i);
has_asym |= sd->flags & SD_ASYM_CPUCAPACITY;
@@ -2433,6 +2453,9 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
}
}
+ if (WARN_ON(!topology_span_sane(cpu_map)))
+ goto error;
+
/* Build the groups for the domains */
for_each_cpu(i, cpu_map) {
for (sd = *per_cpu_ptr(d.sd, i); sd; sd = sd->parent) {
--
2.26.2
Powered by blists - more mailing lists