lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <806770fc-3830-4e89-a3ee-487b662685ed@gmx.net>
Date: Thu, 31 Oct 2024 11:10:32 +0100
From: Stefan Wahren <wahrenst@....net>
To: Lukasz Majewski <lukma@...x.de>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 4/4] ARM: dts: mxs: Add descriptions for imx287 based
 btt3-[012] devices

Am 31.10.24 um 09:42 schrieb Lukasz Majewski:
> Dear Community,
>
>> The btt3 device' HW revisions from 0 to 2 use imx287 SoC and are to
>> some extend similar to already upstreamed XEA devices, hence are
>> using common imx28-lwe.dtsi file.
>>
>> New, imx28-btt3.dtsi has been added to embrace common DTS
>> properties for different HW revisions for this device.
>>
>> As a result - changes introduced in imx28-btt3-[012].dts are
>> minimal.
>>
>> Signed-off-by: Lukasz Majewski <lukma@...x.de>
>>
>> ---
>> Changes for v2:
>> - Rename dts file from btt3-[012] to imx28-btt3-[012] to match current
>>    linux kernel naming convention
>> - Remove 'wlf,wm8974' from compatible for codec@1a
>>
>> Changes for v3:
>> - Keep alphabethical order for Makefile entries
>>
>> Changes for v4:
>> - Change compatible for btt3 board (to 'lwn,imx28-btt3')
>>
>> Changes for v5:
>> - Combine patch, which adds btt3-[012] with one adding board entry to
>>    fsl.yaml
>>
>> Changes for v6:
>> - Make the patch series for adding entry in fsl.yaml and btt3
>>
>> Changes for v7:
>> - Use "panel" property as suggested by the community
>> - Use panel-timing to specify the display parameters
>> - Update subject line with correct tags
>>
>> Changes for v8:
>> - Use GPIO_ACTIVE_HIGH instead of '0'
>> - Add the comment regarding mac address specification
>> - Remove superfluous comment
>> - Change wifi-en-pin node name
>>
>> Changes for v9:
>> - Remove not used 'pm-ignore-notify'
>> - Add display names for 'panel-dpi' compatible to avoid Schema
>> warnings
>>
>> Changes for v10:
>> - Drop new line with panel-timing definitions
>> - Add new lines with 'sound' node
>> - Change 'codec' to 'audio-codec'
>> - Change order of properties for saif1 node
> Are there any more comments regarding this patch?
Sorry, i wasn't aware that you are waiting for reviews after Rob's request.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ