| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241101-x1e80100-ps8830-v4-3-f0f7518b263e@linaro.org>
Date: Fri, 01 Nov 2024 18:29:41 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rajendra Nayak <quic_rjendra@...cinc.com>,
Sibi Sankar <quic_sibis@...cinc.com>, Johan Hovold <johan@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Trilok Soni <quic_tsoni@...cinc.com>, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
Abel Vesa <abel.vesa@...aro.org>
Subject: [PATCH v4 3/4] arm64: dts: qcom: x1e80100-crd: Describe the Parade
PS8830 retimers
The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each
Type-C port. These handle the orientation and altmode switching and are
controlled over I2C. In the connection chain, they sit between the
USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints.
Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 439 +++++++++++++++++++++++++++++-
1 file changed, 433 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 279697f2c72890a6d379aa0c153171960e44bd63..6e1b9e1d227ce0a3607af708e2438be33424eec5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -99,7 +99,15 @@ port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
};
};
};
@@ -128,7 +136,15 @@ port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
};
};
};
@@ -157,7 +173,15 @@ port@1 {
reg = <1>;
pmic_glink_ss2_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ remote-endpoint = <&retimer_ss2_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss2_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss2_con_sbu_out>;
};
};
};
@@ -293,6 +317,150 @@ vreg_nvme: regulator-nvme {
regulator-boot-on;
};
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb0_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
+ vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ };
+
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
@@ -711,6 +879,178 @@ keyboard@3a {
};
};
+&i2c1 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+ vdd-supply = <&vreg_rtmr2_1p15>;
+ vdd33-supply = <&vreg_rtmr2_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+ vddar-supply = <&vreg_rtmr2_1p15>;
+ vddat-supply = <&vreg_rtmr2_1p15>;
+ vddio-supply = <&vreg_rtmr2_1p8>;
+
+ reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr2_default>;
+ pinctrl-names = "default";
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss2_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss2_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss2_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+ vdd-supply = <&vreg_rtmr0_1p15>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+ vddar-supply = <&vreg_rtmr0_1p15>;
+ vddat-supply = <&vreg_rtmr0_1p15>;
+ vddio-supply = <&vreg_rtmr0_1p8>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr0_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+ vdd-supply = <&vreg_rtmr1_1p15>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+ vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+ vddar-supply = <&vreg_rtmr1_1p15>;
+ vddat-supply = <&vreg_rtmr1_1p15>;
+ vddio-supply = <&vreg_rtmr1_1p8>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&rtmr1_default>;
+ pinctrl-names = "default";
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+
+ };
+ };
+};
+
&i2c8 {
clock-frequency = <400000>;
@@ -856,6 +1196,28 @@ &pcie6a_phy {
status = "okay";
};
+&pm8550_gpios {
+ rtmr0_default: rtmr0-reset-n-active-state {
+ pins = "gpio10";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ };
+
+ usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ };
+};
+
+&pm8550ve_9_gpios {
+ usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ };
+};
+
&pmc8380_3_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio4";
@@ -866,6 +1228,15 @@ edp_bl_en: edp-bl-en-state {
};
};
+&pmc8380_5_gpios {
+ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "normal";
+ power-source = <1>; /* 1.8V */
+ bias-disable;
+ };
+};
+
&qupv3_0 {
status = "okay";
};
@@ -1095,6 +1466,62 @@ wake-n-pins {
};
};
+ usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr1_default: rtmr1-reset-n-active-state {
+ pins = "gpio176";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+ pins = "gpio189";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+ pins = "gpio126";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+ pins = "gpio187";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_default: rtmr2-reset-n-active-state {
+ pins = "gpio185";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
@@ -1162,7 +1589,7 @@ &usb_1_ss0_dwc3_hs {
};
&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ remote-endpoint = <&retimer_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
@@ -1190,7 +1617,7 @@ &usb_1_ss1_dwc3_hs {
};
&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ remote-endpoint = <&retimer_ss1_ss_in>;
};
&usb_1_ss2_hsphy {
@@ -1218,5 +1645,5 @@ &usb_1_ss2_dwc3_hs {
};
&usb_1_ss2_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ remote-endpoint = <&retimer_ss2_ss_in>;
};
--
2.34.1
Powered by blists - more mailing lists