[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241101080614.1070819-2-andrei.stefanescu@oss.nxp.com>
Date: Fri, 1 Nov 2024 10:06:07 +0200
From: Andrei Stefanescu <andrei.stefanescu@....nxp.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Chester Lin <chester62515@...il.com>,
Matthias Brugger <mbrugger@...e.com>,
Ghennadi Procopciuc <Ghennadi.Procopciuc@....com>,
Larisa Grigore <larisa.grigore@....com>,
Andrei Stefanescu <andrei.stefanescu@....nxp.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Lee Jones <lee@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Dong Aisheng <aisheng.dong@....com>,
Jacky Bai <ping.bai@....com>
Cc: linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
NXP S32 Linux Team <s32@....com>,
Christophe Lizzi <clizzi@...hat.com>,
Alberto Ruiz <aruizrui@...hat.com>,
Enric Balletbo <eballetb@...hat.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
imx@...ts.linux.dev
Subject: [PATCH v5 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module
Add the dt-bindings for the NXP SIUL2 module which is a multi
function device. It can export information about the SoC, configure
the pinmux&pinconf for pins and it is also a GPIO controller with
interrupt capability.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@....nxp.com>
---
.../devicetree/bindings/mfd/nxp,siul2.yaml | 191 ++++++++++++++++++
1 file changed, 191 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
diff --git a/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml b/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
new file mode 100644
index 000000000000..141ec1219821
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/nxp,siul2.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/nxp,siul2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: System Integration Unit Lite2 (SIUL2)
+
+maintainers:
+ - Andrei Stefanescu <andrei.stefanescu@....nxp.com>
+
+description: |
+ SIUL2 is a hardware block which implements pinmuxing,
+ pinconf, GPIOs (some with interrupt capability) and
+ registers which contain information about the SoC.
+ There are generally two SIUL2 modules whose functionality
+ is grouped together. For example interrupt configuration
+ registers are part of SIUL2_1 even though interrupts are
+ also available for SIUL2_0 pins.
+
+ The following register types are exported by SIUL2:
+ - MIDR (MCU ID Register) - information related to the SoC
+ - interrupt configuration registers
+ - MSCR (Multiplexed Signal Configuration Register) - pinmuxing and pinconf
+ - IMCR (Input Multiplexed Signal Configuration Register)- pinmuxing
+ - PGPDO (Parallel GPIO Pad Data Out Register) - GPIO output value
+ - PGPDI (Parallel GPIO Pad Data In Register) - GPIO input value
+
+ Most registers are 32bit wide with the exception of PGPDO/PGPDI which are
+ 16bit wide.
+
+properties:
+ compatible:
+ enum:
+ - nxp,s32g2-siul2
+ - nxp,s32g3-siul2
+
+ reg:
+ items:
+ - description: SIUL2_0 module memory
+ - description: SIUL2_1 module memory
+
+ reg-names:
+ items:
+ - const: siul20
+ - const: siul21
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ minItems: 2
+ maxItems: 2
+
+ gpio-reserved-ranges:
+ minItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ nvmem-layout:
+ $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
+ description:
+ This container may reference an NVMEM layout parser.
+
+patternProperties:
+ '-hog(-[0-9]+)?$':
+ required:
+ - gpio-hog
+
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-grp[0-9]$':
+ type: object
+ allOf:
+ - $ref: /schemas/pinctrl/pinmux-node.yaml#
+ - $ref: /schemas/pinctrl/pincfg-node.yaml#
+ description:
+ Pinctrl node's client devices specify pin muxes using subnodes,
+ which in turn use the standard properties below.
+
+ properties:
+ bias-disable: true
+ bias-high-impedance: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-open-drain: true
+ input-enable: true
+ output-enable: true
+
+ pinmux:
+ description: |
+ An integer array for representing pinmux configurations of
+ a device. Each integer consists of a PIN_ID and a 4-bit
+ selected signal source(SSS) as IOMUX setting, which is
+ calculated as: pinmux = (PIN_ID << 4 | SSS)
+
+ slew-rate:
+ description: Supported slew rate based on Fmax values (MHz)
+ enum: [83, 133, 150, 166, 208]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+ - gpio-reserved-ranges
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ siul2: siul2@...9c000 {
+ compatible = "nxp,s32g2-siul2";
+ reg = <0x4009c000 0x179c>,
+ <0x44010000 0x17b0>;
+ reg-names = "siul20", "siul21";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&siul2 0 0 102>, <&siul2 112 112 79>;
+ gpio-reserved-ranges = <102 10>, <123 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+
+ jtag_pins: jtag-pins {
+ jtag-grp0 {
+ pinmux = <0x0>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+
+ jtag-grp1 {
+ pinmux = <0x11>;
+ slew-rate = <166>;
+ };
+
+ jtag-grp2 {
+ pinmux = <0x40>;
+ input-enable;
+ bias-pull-down;
+ slew-rate = <166>;
+ };
+
+ jtag-grp3 {
+ pinmux = <0x23c0>,
+ <0x23d0>,
+ <0x2320>;
+ };
+
+ jtag-grp4 {
+ pinmux = <0x51>;
+ input-enable;
+ bias-pull-up;
+ slew-rate = <166>;
+ };
+ };
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ soc-major@0 {
+ reg = <0 0x4>;
+ };
+ };
+ };
+...
--
2.45.2
Powered by blists - more mailing lists