| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAL_JsqJE20OHcbKY13eQsYjbNumj_vQEKQw28GU0tH0Si=G+ZA@mail.gmail.com>
Date: Fri, 1 Nov 2024 07:02:04 -0500
From: Rob Herring <robh@...nel.org>
To: Alexey Klimov <alexey.klimov@...aro.org>
Cc: broonie@...nel.org, konradybcio@...nel.org, konrad.dybcio@....qualcomm.com,
andersson@...nel.org, srinivas.kandagatla@...aro.org, tiwai@...e.com,
lgirdwood@...il.com, perex@...ex.cz, krzk+dt@...nel.org, conor+dt@...nel.org,
dmitry.baryshkov@...aro.org, linux-sound@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 07/10] ASoC: codecs: add wsa881x-i2c amplifier codec driver
On Fri, Nov 1, 2024 at 12:32 AM Alexey Klimov <alexey.klimov@...aro.org> wrote:
>
> Add support to analog mode of WSA8810/WSA8815 Class-D Smart Speaker
> family of amplifiers. Such amplifiers is primarily interfaced with
> SoundWire but they also support analog mode which is configurable
> by setting one of the pins to high/low. In such case the WSA881X
> amplifier is configurable only using i2c.
>
> To have stereo two WSA881X amplifiers are required but mono
> configurations are also possible.
>
> Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> Signed-off-by: Alexey Klimov <alexey.klimov@...aro.org>
> ---
> sound/soc/codecs/Kconfig | 11 +
> sound/soc/codecs/Makefile | 2 +
> sound/soc/codecs/wsa881x-common.h | 19 +
> sound/soc/codecs/wsa881x-i2c.c | 1454 +++++++++++++++++++++++++++++
> 4 files changed, 1486 insertions(+)
> create mode 100644 sound/soc/codecs/wsa881x-i2c.c
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index b8ea8cf73d63..3d7868977262 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -350,6 +350,7 @@ config SND_SOC_ALL_CODECS
> imply SND_SOC_WM9712
> imply SND_SOC_WM9713
> imply SND_SOC_WSA881X
> + imply SND_SOC_WSA881X_I2C
> imply SND_SOC_WSA883X
> imply SND_SOC_WSA884X
> imply SND_SOC_ZL38060
> @@ -2484,6 +2485,16 @@ config SND_SOC_WSA881X
> This enables support for Qualcomm WSA8810/WSA8815 Class-D
> Smart Speaker Amplifier.
>
> +config SND_SOC_WSA881X_I2C
> + tristate "WSA881X Codec - Analog mode"
> + depends on I2C
> + select REGMAP_I2C
> + select SND_SOC_WSA881X_COMMON
> + help
> + This enables support for Qualcomm WSA8810/WSA8815 Class-D Smart
> + Speaker Amplifier that works in analog mode and configurable
> + via I2C.
> +
> config SND_SOC_WSA883X
> tristate "WSA883X Codec"
> depends on SOUNDWIRE
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index bc1498cedf08..682bdf63abea 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -399,6 +399,7 @@ snd-soc-wm9713-y := wm9713.o
> snd-soc-wm-hubs-y := wm_hubs.o
> snd-soc-wsa881x-y := wsa881x.o
> snd-soc-wsa881x-common-y := wsa881x-common.o
> +snd-soc-wsa881x-i2c-y := wsa881x-i2c.o
> snd-soc-wsa883x-y := wsa883x.o
> snd-soc-wsa884x-y := wsa884x.o
> snd-soc-zl38060-y := zl38060.o
> @@ -821,6 +822,7 @@ obj-$(CONFIG_SND_SOC_WM_ADSP) += snd-soc-wm-adsp.o
> obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o
> obj-$(CONFIG_SND_SOC_WSA881X) += snd-soc-wsa881x.o
> obj-$(CONFIG_SND_SOC_WSA881X_COMMON) += snd-soc-wsa881x-common.o
> +obj-$(CONFIG_SND_SOC_WSA881X_I2C) += snd-soc-wsa881x-i2c.o
> obj-$(CONFIG_SND_SOC_WSA883X) += snd-soc-wsa883x.o
> obj-$(CONFIG_SND_SOC_WSA884X) += snd-soc-wsa884x.o
> obj-$(CONFIG_SND_SOC_ZL38060) += snd-soc-zl38060.o
> diff --git a/sound/soc/codecs/wsa881x-common.h b/sound/soc/codecs/wsa881x-common.h
> index cf8643e1f7f7..1b9c20cd3807 100644
> --- a/sound/soc/codecs/wsa881x-common.h
> +++ b/sound/soc/codecs/wsa881x-common.h
> @@ -2,6 +2,7 @@
> #ifndef __WSA881x_COMMON_H__
> #define __WSA881x_COMMON_H__
>
> +#include <linux/i2c.h>
> #include <linux/soundwire/sdw.h>
> #include <sound/soc.h>
>
> @@ -193,6 +194,24 @@ struct wsa881x_priv {
> bool port_enable[WSA881X_MAX_SWR_PORTS];
> #endif
>
> +#if IS_ENABLED(CONFIG_SND_SOC_WSA881X_I2C)
> + /* i2c interace for analog mode */
> + struct regmap *regmap_analog;
> + /* First client is for digital part, the second is for analog part */
> + struct i2c_client *client[2];
> + struct snd_soc_component *component;
> + struct snd_soc_dai_driver *dai_driver;
> + struct snd_soc_component_driver *driver;
> + struct gpio_desc *mclk_pin;
> + struct clk *wsa_mclk;
> + bool boost_enable;
> + int spk_pa_gain;
> + struct i2c_msg xfer_msg[2];
> + bool regmap_flag;
> + bool wsa_active;
> + int index;
> + int version;
> +#endif
> struct gpio_desc *sd_n;
> /*
> * Logical state for SD_N GPIO: high for shutdown, low for enable.
> diff --git a/sound/soc/codecs/wsa881x-i2c.c b/sound/soc/codecs/wsa881x-i2c.c
> new file mode 100644
> index 000000000000..74fa85306ad9
> --- /dev/null
> +++ b/sound/soc/codecs/wsa881x-i2c.c
> @@ -0,0 +1,1454 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2015-2016, 2018-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2024, Linaro Limited
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/slab.h>
> +#include <linux/of_gpio.h>
No new users of this please. We are working on removing it.
Rob
Powered by blists - more mailing lists