Message-ID: <ZyTtVdkCCES0lkl4@hovoldconsulting.com>
Date: Fri, 1 Nov 2024 16:01:41 +0100
From: Johan Hovold <johan@...nel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
	Bjorn Andersson <bjorn.andersson@....qualcomm.com>
Cc: Qiang Yu <quic_qianyu@...cinc.com>,
	Jeffrey Hugo <quic_jhugo@...cinc.com>,
	Krishna chaitanya chundru <quic_krichai@...cinc.com>,
	Chris Lew <quic_clew@...cinc.com>,
	Konrad Dybcio <konradybcio@...nel.org>, mhi@...ts.linux.dev,
	linux-arm-msm@...r.kernel.org, linux-remoteproc@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: qrtr/mhi: NULL-deref with in-kernel pd-mapper

Hi,

I just ran into a NULL-deref in a qrts/mhi path during boot of the
x1e80100 CRD for the second time.

First time was with a 6.11 kernel (but I never got around to reporting
it) and today it happened again with 6.12-rc5.

Both times I was using the in-kernel pd-mapper, which has exposed a
number of bugs elsewhere due to changes in timing, but I'm not sure if
the pd-mapper is involved here or not.

See serial console log below.

Last time I think the machine survived so that I could save a cleaner
log of the oops. That one is included after the serial log for
completeness.

Johan


[    8.531773] remoteproc remoteproc1: remote processor 32300000.remoteproc is now up

[    8.825593] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000034
.
[    8.838623] Mem abort info:
[    8.838626]   ESR = 0x0000000096000004
[    8.838628]   EC = 0x25: DABT (current EL), IL = 32 bits
[    8.838630]   SET = 0, FnV = 0
[    8.838632]   EA = 0, S1PTW = 0
[    8.838633]   FSC = 0x04: level 0 translation fault
[    8.838635] Data abort info:
[    8.838637]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[    8.838639]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    8.838641]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    8.838643] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008813bf000
[    8.838645] [0000000000000034] pgd=0000000000000000, p4d=0000000000000000
[    8.838777] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[    8.857297] Modules linked in: mhi_wwan_ctrl(+) wwan qrtr_mhi(+) mhi_net(+) rpmsg_ctrl(+) rpmsg_char pmic_glink_altm
ode qcom_pd_mapper ucsi_glink aux_hpd_bridge qcom_battmgr typec_ucsi hci_uart btqca phy_qcom_eusb2_repeater qcom_spmi_t
emp_alarm(+) qcom_pon bluetooth sm3_ce ps8830 ath12k(+)
[    8.864039]  industrialio sm3 reboot_mode nvmem_qcom_spmi_sdam mac80211 snd_soc_x1e80100 phy_qcom_qmp_combo regmap_i
2c sha3_ce ecdh_generic pci_pwrctl_pwrseq ecc aux_bridge
[    8.872648]  snd_soc_qcom_common libarc4 sha512_ce pci_pwrctl_core pwrseq_qcom_wcn sha512_arm64 snd_soc_qcom_sdw typ
ec pwrseq_core qcom_q6v5_pas qcom_stats
[    8.880892]  snd_soc_wcd938x input_leds mhi_pci_generic snd_soc_wcd_classh qcom_pil_info snd_soc_wcd938x_sdw qcom_co
mmon dispcc_x1e80100 snd_soc_lpass_rx_macro led_class qcom_glink_smem
[    8.889499]  snd_soc_lpass_tx_macro snd_soc_lpass_va_macro regmap_sdw snd_soc_lpass_wsa_macro mhi phy_qcom_edp pinct
rl_sm8550_lpass_lpi snd_soc_wcd_mbhc soundwire_qcom snd_soc_lpass_macro_common
[    8.900156]  qcom_glink phy_qcom_qmp_usb phy_qcom_snps_eusb2 pinctrl_lpass_lpi lpasscc_sc8280xp qrtr snd_soc_core qc
om_q6v5 cfg80211 gpucc_x1e80100
[    8.913754]  qcom_sysmon
[    8.933436]  pmic_glink snd_compress rfkill icc_bwmon rpmsg_core snd_pcm pdr_interface qcom_cpucp_mbox snd_timer soc
info arm_smccc_trng qcom_pdr_msg qmi_helpers snd rng_core soundcore soundwire_bus fuse dm_mod ip_tables
[    8.960019] qcom-snps-eusb2-hsphy fde000.phy: Registered Qcom-eUSB2 phy
[    8.972985]  x_tables ipv6 autofs4 msm mdt_loader drm_exec gpu_sched drm_display_helper drm_kms_helper drm_dp_aux_bu
s llcc_qcom pcie_qcom crc8
[    9.002021]  phy_qcom_qmp_pcie tcsrcc_x1e80100 nvme nvme_core hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2
c_core
[    9.002030] CPU: 10 UID: 0 PID: 11 Comm: kworker/u48:0 Not tainted 6.12.0-rc5 #4
[    9.029550] Hardware name: Qualcomm CRD, BIOS 6.0.231221.BOOT.MXF.2.4-00348.1-HAMOA-1 12/21/2023
[    9.029552] Workqueue: qrtr_ns_handler qrtr_ns_worker [qrtr]
[    9.061350] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[    9.061353] pc : mhi_gen_tre+0x44/0x224 [mhi]
[    9.090573] qcom_pmic_glink pmic-glink: Failed to create device link (0x180) with 2-0008
[    9.106931] lr : mhi_gen_tre+0x40/0x224 [mhi]
[    9.106934] sp : ffff8000800fb7d0
[    9.106935] x29: ffff8000800fb7d0 x28: ffff6db7852bd000 x27: ffff800082490188
[    9.120382] dwc3 a000000.usb: Adding to iommu group 5
[    9.133750]
[    9.133752] x26: 0000000000000000 x25: ffff6db783e65080 x24: ffff80008248ff88
[    9.133754] x23: 0000000000000000 x22: ffff80008248ff80 x21: ffff8000800fb890
[    9.133756] x20: 0000000000000000 x19: 0000000000000002 x18: 000000000005cf20
[    9.133758] x17: 0000000000000028 x16: 0000000000000000
[    9.172738]  x15: ffffa5834131fbd0
[    9.172741] x14: ffffa5834137caf0 x13: 000000000000ce30 x12: ffff6db7808bc028
[    9.172743] x11: ffffa58341993000 x10: 0000000000000000 x9 : 00000000cf3f2b90
[    9.172745] x8 : 0000000094e5072b x7 : 00000000000404ce x6 : ffffa5834162cfb0
[    9.172747] x5 : 000000000000008b x4 : ffffa583419cddf0 x3 : 0000000000000007
[    9.172750] x2 : 0000000000000000
[    9.192697]  x1 : 000000000000000a x0 : ffff6db7808bb700
[    9.192700] Call trace:
[    9.192701]  mhi_gen_tre+0x44/0x224 [mhi]
[    9.192704]  mhi_queue+0x74/0x194 [mhi]
[    9.192706]  mhi_queue_skb+0x5c/0x8c [mhi]
[    9.210985]  qcom_mhi_qrtr_send+0x6c/0x160 [qrtr_mhi]
[    9.210989]  qrtr_node_enqueue+0xd0/0x4a0 [qrtr]
[    9.210992]  qrtr_bcast_enqueue+0x78/0xe8 [qrtr]
[    9.225530]  qrtr_sendmsg+0x15c/0x33c [qrtr]
[    9.225532]  sock_sendmsg+0xc0/0xec
[    9.240436]  kernel_sendmsg+0x30/0x40
[    9.240438]  service_announce_new+0xbc/0x1c4 [qrtr]
[    9.240440]  qrtr_ns_worker+0x714/0x794 [qrtr]
[    9.240441]  process_one_work+0x210/0x614
[    9.254527]  worker_thread+0x23c/0x378
[    9.254529]  kthread+0x124/0x128
[    9.254531]  ret_from_fork+0x10/0x20
[    9.254534] Code: aa0003f9 aa1b03e0 94001a4d f9401b14 (3940d280)
[    9.267369] ---[ end trace 0000000000000000 ]---
[    9.267371] Kernel panic - not syncing: Oops: Fatal exception in interrupt


[    9.408420] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000034
[    9.408429] Mem abort info:
[    9.408431]   ESR = 0x0000000096000004
[    9.408434]   EC = 0x25: DABT (current EL), IL = 32 bits
[    9.408437]   SET = 0, FnV = 0
[    9.408439]   EA = 0, S1PTW = 0
[    9.408441]   FSC = 0x04: level 0 translation fault
[    9.408444] Data abort info:
[    9.408446]   ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[    9.408448]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    9.408450]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    9.408453] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000882f43000
[    9.408456] [0000000000000034] pgd=0000000000000000, p4d=0000000000000000
[    9.408476] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[    9.408479] Modules linked in: mhi_wwan_ctrl(+) wwan qrtr_mhi(+) mhi_net(+) qcom_pd_mapper(+) ucsi_glink pmic_glink_
altmode sm3_ce qcom_battmgr(+) aux_hpd_bridge typec_ucsi ath12k(+) sm3 sha3_ce mac80211 snd_soc_x1e80100 sha512_ce liba
rc4 phy_qcom_eusb2_repeater nvmem_qcom_spmi_sdam sha512_arm64 ps8830(+) snd_soc_qcom_common qcom_spmi_temp_alarm snd_so
c_qcom_sdw qcom_pon qcom_q6v5_pas regmap_i2c phy_qcom_qmp_combo reboot_mode aux_bridge qcom_pil_info industrialio typec
 cfg80211 phy_qcom_snps_eusb2 qcom_stats phy_qcom_edp dispcc_x1e80100 qcom_common pinctrl_sm8550_lpass_lpi snd_soc_lpas
s_va_macro qcom_glink_smem pinctrl_lpass_lpi lpasscc_sc8280xp snd_soc_wcd938x snd_soc_lpass_tx_macro snd_soc_lpass_wsa_
macro snd_soc_lpass_rx_macro qcom_glink snd_soc_wcd_classh soundwire_qcom snd_soc_lpass_macro_common snd_soc_wcd938x_sd
w qcom_q6v5 regmap_sdw mhi_pci_generic gpucc_x1e80100 snd_soc_wcd_mbhc qcom_sysmon mhi icc_bwmon snd_soc_core rfkill sn
d_compress qrtr snd_pcm qcom_cpucp_mbox snd_timer input_leds pmic_glink snd
[    9.408524]  led_class arm_smccc_trng rng_core rpmsg_core soundcore pdr_interface soundwire_bus qcom_pdr_msg socinfo
 qmi_helpers fuse dm_mod ip_tables x_tables ipv6 autofs4 msm mdt_loader drm_exec gpu_sched drm_display_helper drm_kms_h
elper drm_dp_aux_bus llcc_qcom pcie_qcom crc8 phy_qcom_qmp_pcie tcsrcc_x1e80100 nvme nvme_core hid_multitouch i2c_qcom_
geni i2c_hid_of i2c_hid drm i2c_core
[    9.408548] CPU: 4 UID: 0 PID: 94 Comm: kworker/u48:1 Not tainted 6.11.0 #185
[    9.408550] Hardware name: Qualcomm CRD, BIOS 6.0.231221.BOOT.MXF.2.4-00348.1-HAMOA-1 12/21/2023
[    9.408551] Workqueue: qrtr_ns_handler qrtr_ns_worker [qrtr]
[    9.408556] pstate: a1400005 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[    9.408558] pc : mhi_gen_tre+0x44/0x224 [mhi]
[    9.408563] lr : mhi_gen_tre+0x40/0x224 [mhi]
[    9.408566] sp : ffff800080d637d0
[    9.408567] x29: ffff800080d637d0 x28: ffff65434505a380 x27: ffff8000827ee188
[    9.408570] x26: 0000000000000000 x25: ffff65434ad59080 x24: ffff8000827edf88
[    9.408572] x23: 0000000000000000 x22: ffff8000827edf80 x21: ffff800080d63890
[    9.408575] x20: 0000000000000000 x19: 0000000000000002 x18: 00000000000506c0
[    9.408577] x17: 0000000000000028 x16: 0000000000000000 x15: ffffb0aa21cdac88
[    9.408579] x14: ffffb0aa21d2b348 x13: 000000000000a9ac x12: ffff654341700928
[    9.408582] x11: ffffb0aa2234ecc8 x10: fffffffffffffd20 x9 : 0000000089ad6b58
[    9.408585] x8 : 00000000d944ea76 x7 : 00000000000404a8 x6 : ffffb0aa21fd49a8
[    9.408587] x5 : 0000000000000084 x4 : ffffb0aa223883b8 x3 : 000000001fffffff
[    9.408589] x2 : 0000000000000000 x1 : 0000000000000004 x0 : ffff654341700000
[    9.408592] Call trace:
[    9.408593]  mhi_gen_tre+0x44/0x224 [mhi]
[    9.408596]  mhi_queue+0x74/0x194 [mhi]
[    9.408598]  mhi_queue_skb+0x5c/0x8c [mhi]
[    9.408601]  qcom_mhi_qrtr_send+0x6c/0x160 [qrtr_mhi]
[    9.408604]  qrtr_node_enqueue+0xd0/0x4a0 [qrtr]
[    9.408606]  qrtr_bcast_enqueue+0x78/0xdc [qrtr]
[    9.408609]  qrtr_sendmsg+0x15c/0x33c [qrtr]
[    9.408612]  sock_sendmsg+0xc0/0xec
[    9.408617]  kernel_sendmsg+0x30/0x40
[    9.408619]  service_announce_new+0xbc/0x1c4 [qrtr]
[    9.408621]  qrtr_ns_worker+0x714/0x794 [qrtr]
[    9.408622]  process_one_work+0x210/0x614
[    9.408626]  worker_thread+0x23c/0x378
[    9.408627]  kthread+0x124/0x128
[    9.408628]  ret_from_fork+0x10/0x20
[    9.408631] Code: aa0003f9 aa1b03e0 94001a51 f9401b14 (3940d280)
[    9.408633] ---[ end trace 0000000000000000 ]---

Powered by blists - more mailing lists