| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5a5hwcql76oxryxlhekykm7gipptfmp27ovs5uzrjemmbw47sw@lqajkvn2pkdx>
Date: Sat, 2 Nov 2024 14:16:00 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Barnabás Czémán <barnabas.czeman@...nlining.org>
Cc: Robert Foss <rfoss@...nel.org>, Todor Tomov <todor.too@...il.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>, Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-media@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v2 2/3] media: dt-bindings: media: camss: Add
qcom,msm8953-camss binding
On Sat, Nov 02, 2024 at 02:32:29AM +0100, Barnabás Czémán wrote:
> Add bindings for qcom,msm8953-camss in order to support the camera
> subsystem for MSM8953/SDM450/SDM632.
>
subject: only one media prefix, the first one.
> Signed-off-by: Barnabás Czémán <barnabas.czeman@...nlining.org>
> ---
> .../bindings/media/qcom,msm8953-camss.yaml | 323 +++++++++++++++++++++
> 1 file changed, 323 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..1d2236bc8d94ba81d8b993a105dc5d6a812c727e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
> @@ -0,0 +1,323 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
Drop blank line
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm CAMSS ISP
All CAMSS? Or only MSM8953?
> +
> +maintainers:
> + - Barnabas Czeman <barnabas.czeman@...nlining.org>
> +
> +description: |
Do not need '|' unless you need to preserve formatting.
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> + compatible:
> + const: qcom,msm8953-camss
> +
> + clocks:
> + minItems: 30
> + maxItems: 30
> +
> + clock-names:
> + items:
> + - const: ahb
> + - const: csi0
> + - const: csi0_ahb
> + - const: csi0_phy
> + - const: csi0_pix
> + - const: csi0_rdi
> + - const: csi1
> + - const: csi1_ahb
> + - const: csi1_phy
> + - const: csi1_pix
> + - const: csi1_rdi
> + - const: csi2
> + - const: csi2_ahb
> + - const: csi2_phy
> + - const: csi2_pix
> + - const: csi2_rdi
> + - const: csi_vfe0
> + - const: csi_vfe1
> + - const: csiphy0_timer
> + - const: csiphy1_timer
> + - const: csiphy2_timer
> + - const: ispif_ahb
> + - const: micro_ahb
> + - const: top_ahb
> + - const: vfe0
> + - const: vfe0_ahb
> + - const: vfe0_axi
> + - const: vfe1
> + - const: vfe1_ahb
> + - const: vfe1_axi
> +
> + interrupts:
> + minItems: 9
> + maxItems: 9
> +
> + interrupt-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + iommus:
> + maxItems: 1
> +
> + power-domains:
> + items:
> + - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
> + - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
> +
> + power-domain-names:
> + items:
> + - const: vfe0
> + - const: vfe1
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + description:
> + An array of physical data lanes indexes.
> + Position of an entry determines the logical
> + lane number, while the value of an entry
> + indicates physical lane index. Lane swapping
> + is supported. Physical lane indexes;
> + 0, 2, 3, 4.
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> + reg:
> + minItems: 13
> + maxItems: 13
> +
> + reg-names:
> + items:
> + - const: csi_clk_mux
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csiphy0
> + - const: csiphy0_clk_mux
> + - const: csiphy1
> + - const: csiphy1_clk_mux
> + - const: csiphy2
> + - const: csiphy2_clk_mux
> + - const: ispif
> + - const: vfe0
> + - const: vfe1
> +
> + vdda-supply:
> + description:
> + Definition of the regulator used as analog power supply.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - iommus
> + - power-domains
> + - power-domain-names
> + - vdda-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8953.h>
> +
> + camss: camss@...0000 {
> + compatible = "qcom,msm8953-camss";
> +
> + reg = <0x1b00020 0x10>,
Your DTS was not tested :/. Mismatched unit address.
See Soc maintainer profiles about W=1 checks. Do not use us for such
review, but tools.
Best regards,
Krzysztof
Powered by blists - more mailing lists