[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241104-pxa1908-lkml-v13-6-e050609b8d6c@skole.hr>
Date: Mon, 04 Nov 2024 17:37:08 +0100
From: Duje Mihanović via B4 Relay <devnull+duje.mihanovic.skole.hr@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Tony Lindgren <tony@...mide.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Duje Mihanović <duje.mihanovic@...le.hr>,
Lubomir Rintel <lkundrak@...sk>, Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht,
Karel Balej <balejk@...fyz.cz>, David Wronek <david@...nlining.org>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH RESEND v13 06/12] clk: mmp: Add Marvell PXA1908 APBCP
driver
From: Duje Mihanović <duje.mihanovic@...le.hr>
Add driver for the APBCP controller block found on Marvell's PXA1908
SoC.
Signed-off-by: Duje Mihanović <duje.mihanovic@...le.hr>
---
drivers/clk/mmp/Makefile | 2 +-
drivers/clk/mmp/clk-pxa1908-apbcp.c | 82 +++++++++++++++++++++++++++++++++++++
2 files changed, 83 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index 685bb80f8ae1f16d967dc4f6f5a6ce4e3f52d2bd..038bcd4d035e1807973f5094db5565fe437e0650 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -11,4 +11,4 @@ obj-$(CONFIG_MACH_MMP_DT) += clk-of-pxa168.o clk-of-pxa910.o
obj-$(CONFIG_COMMON_CLK_MMP2) += clk-of-mmp2.o clk-pll.o pwr-island.o
obj-$(CONFIG_COMMON_CLK_MMP2_AUDIO) += clk-audio.o
-obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-pxa1908-apbc.o clk-pxa1908-apbcp.o
diff --git a/drivers/clk/mmp/clk-pxa1908-apbcp.c b/drivers/clk/mmp/clk-pxa1908-apbcp.c
new file mode 100644
index 0000000000000000000000000000000000000000..08f3845cbb1becfa08e82e6e7fd8cb8aac7a0385
--- /dev/null
+++ b/drivers/clk/mmp/clk-pxa1908-apbcp.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APBCP_UART2 0x1c
+#define APBCP_TWSI2 0x28
+#define APBCP_AICER 0x38
+
+#define APBCP_NR_CLKS 4
+
+struct pxa1908_clk_unit {
+ struct mmp_clk_unit unit;
+ void __iomem *base;
+};
+
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+ {PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+ {PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+ {PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+ {0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+ struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+ mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->base,
+ ARRAY_SIZE(apbcp_mux_clks));
+ mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->base,
+ ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static int pxa1908_apbcp_probe(struct platform_device *pdev)
+{
+ struct pxa1908_clk_unit *pxa_unit;
+
+ pxa_unit = devm_kzalloc(&pdev->dev, sizeof(*pxa_unit), GFP_KERNEL);
+ if (IS_ERR(pxa_unit))
+ return PTR_ERR(pxa_unit);
+
+ pxa_unit->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pxa_unit->base))
+ return PTR_ERR(pxa_unit->base);
+
+ mmp_clk_init(pdev->dev.of_node, &pxa_unit->unit, APBCP_NR_CLKS);
+
+ pxa1908_apb_p_periph_clk_init(pxa_unit);
+
+ return 0;
+}
+
+static const struct of_device_id pxa1908_apbcp_match_table[] = {
+ { .compatible = "marvell,pxa1908-apbcp" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pxa1908_apbcp_match_table);
+
+static struct platform_driver pxa1908_apbcp_driver = {
+ .probe = pxa1908_apbcp_probe,
+ .driver = {
+ .name = "pxa1908-apbcp",
+ .of_match_table = pxa1908_apbcp_match_table
+ }
+};
+module_platform_driver(pxa1908_apbcp_driver);
+
+MODULE_AUTHOR("Duje Mihanović <duje.mihanovic@...le.hr>");
+MODULE_DESCRIPTION("Marvell PXA1908 APBCP Clock Driver");
+MODULE_LICENSE("GPL");
--
2.47.0
Powered by blists - more mailing lists