[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zyiju749PMFIL4aa@linaro.org>
Date: Mon, 4 Nov 2024 12:36:43 +0200
From: Abel Vesa <abel.vesa@...aro.org>
To: Christophe JAILLET <christophe.jaillet@...adoo.fr>
Cc: linux-arm-msm@...r.kernel.org, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rajendra Nayak <quic_rjendra@...cinc.com>,
Sibi Sankar <quic_sibis@...cinc.com>,
Johan Hovold <johan@...nel.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Trilok Soni <quic_tsoni@...cinc.com>, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Subject: Re: [PATCH v4 2/4] usb: typec: Add support for Parade PS8830 Type-C
Retimer
On 24-11-01 17:56:04, Christophe JAILLET wrote:
> Le 01/11/2024 à 17:29, Abel Vesa a écrit :
> > The Parade PS8830 is a USB4, DisplayPort and Thunderbolt 4 retimer,
> > controlled over I2C. It usually sits between a USB/DisplayPort PHY
> > and the Type-C connector, and provides orientation and altmode handling.
> >
> > The boards that use this retimer are the ones featuring the Qualcomm
> > Snapdragon X Elite SoCs.
> >
> > Add a driver with support for the following modes:
> > - DisplayPort 4-lanes
> > - DisplayPort 2-lanes + USB3
> > - USB3
> >
> > There is another variant of this retimer which is called PS8833. It seems
> > to be really similar to the PS8830, so future-proof this driver by
> > naming it ps883x.
> >
> > Signed-off-by: Abel Vesa <abel.vesa-QSEj5FYQhm4dnm+yROfE0A@...lic.gmane.org>
> > ---
>
> Hi,
>
> ...
>
> > +static void ps883x_disable_vregs(struct ps883x_retimer *retimer)
> > +{
> > + regulator_disable(retimer->vddio_supply);
> > + regulator_disable(retimer->vddat_supply);
> > + regulator_disable(retimer->vddar_supply);
> > + regulator_disable(retimer->vdd_supply);
> > + regulator_disable(retimer->vdd33_cap_supply);
> > + regulator_disable(retimer->vdd33_supply);
> > +}
> > +
> > +static int ps883x_get_vregs(struct ps883x_retimer *retimer)
>
> This could maybe be replaced by a
> devm_regulator_bulk_get() call?
> (and use the bulk API in other places)
Nope, look in the ps883x_enable_vregs. There are some delays needed between
enabling them, according to spec.
>
> > +{
> > + struct device *dev = &retimer->client->dev;
> > +
> > + retimer->vdd_supply = devm_regulator_get(dev, "vdd");
> > + if (IS_ERR(retimer->vdd_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vdd_supply),
> > + "failed to get VDD\n");
> > +
> > + retimer->vdd33_supply = devm_regulator_get(dev, "vdd33");
> > + if (IS_ERR(retimer->vdd33_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vdd33_supply),
> > + "failed to get VDD 3.3V\n");
> > +
> > + retimer->vdd33_cap_supply = devm_regulator_get(dev, "vdd33-cap");
> > + if (IS_ERR(retimer->vdd33_cap_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vdd33_cap_supply),
> > + "failed to get VDD CAP 3.3V\n");
> > +
> > + retimer->vddat_supply = devm_regulator_get(dev, "vddat");
> > + if (IS_ERR(retimer->vddat_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vddat_supply),
> > + "failed to get VDD AT\n");
> > +
> > + retimer->vddar_supply = devm_regulator_get(dev, "vddar");
> > + if (IS_ERR(retimer->vddar_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vddar_supply),
> > + "failed to get VDD AR\n");
> > +
> > + retimer->vddio_supply = devm_regulator_get(dev, "vddio");
> > + if (IS_ERR(retimer->vddio_supply))
> > + return dev_err_probe(dev, PTR_ERR(retimer->vddio_supply),
> > + "failed to get VDD IO\n");
> > +
> > + return 0;
> > +}
>
> ...
>
> > +static int ps883x_retimer_probe(struct i2c_client *client)
> > +{
> > + struct device *dev = &client->dev;
> > + struct typec_switch_desc sw_desc = { };
> > + struct typec_retimer_desc rtmr_desc = { };
> > + struct ps883x_retimer *retimer;
> > + int ret;
> > +
> > + retimer = devm_kzalloc(dev, sizeof(*retimer), GFP_KERNEL);
> > + if (!retimer)
> > + return -ENOMEM;
> > +
> > + retimer->client = client;
> > +
> > + mutex_init(&retimer->lock);
> > +
> > + retimer->regmap = devm_regmap_init_i2c(client, &ps883x_retimer_regmap);
> > + if (IS_ERR(retimer->regmap)) {
> > + ret = PTR_ERR(retimer->regmap);
> > + dev_err(dev, "failed to allocate register map: %d\n", ret);
>
> Maybe dev_err_probe() as below?
Sure, even though this one here doesn't return EPROBE_DEFER.
But will help with stringifying the error code nonetheless.
So will do that in the next version.
>
> > + return ret;
> > + }
> > +
> > + ret = ps883x_get_vregs(retimer);
> > + if (ret)
> > + return ret;
> > +
> > + retimer->xo_clk = devm_clk_get(dev, NULL);
> > + if (IS_ERR(retimer->xo_clk))
> > + return dev_err_probe(dev, PTR_ERR(retimer->xo_clk),
> > + "failed to get xo clock\n");
> > +
> > + retimer->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
> > + if (IS_ERR(retimer->reset_gpio))
> > + return dev_err_probe(dev, PTR_ERR(retimer->reset_gpio),
> > + "failed to get reset gpio\n");
> > +
> > + retimer->typec_switch = typec_switch_get(dev);
> > + if (IS_ERR(retimer->typec_switch))
> > + return dev_err_probe(dev, PTR_ERR(retimer->typec_switch),
> > + "failed to acquire orientation-switch\n");
> > +
> > + retimer->typec_mux = typec_mux_get(dev);
> > + if (IS_ERR(retimer->typec_mux)) {
> > + ret = dev_err_probe(dev, PTR_ERR(retimer->typec_mux),
> > + "failed to acquire mode-mux\n");
> > + goto err_switch_put;
> > + }
> > +
> > + ret = drm_aux_bridge_register(dev);
> > + if (ret)
> > + goto err_mux_put;
> > +
> > + ret = clk_prepare_enable(retimer->xo_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to enable XO: %d\n", ret);
> > + goto err_mux_put;
> > + }
> > +
> > + ret = ps883x_enable_vregs(retimer);
> > + if (ret)
> > + goto err_clk_disable;
> > +
> > + sw_desc.drvdata = retimer;
> > + sw_desc.fwnode = dev_fwnode(dev);
> > + sw_desc.set = ps883x_sw_set;
> > +
> > + retimer->sw = typec_switch_register(dev, &sw_desc);
> > + if (IS_ERR(retimer->sw)) {
> > + ret = PTR_ERR(retimer->sw);
> > + dev_err(dev, "failed to register typec switch: %d\n", ret);
>
> Maybe dev_err_probe() as above?
Yep.
>
> > + goto err_vregs_disable;
> > + }
> > +
> > + rtmr_desc.drvdata = retimer;
> > + rtmr_desc.fwnode = dev_fwnode(dev);
> > + rtmr_desc.set = ps883x_retimer_set;
> > +
> > + retimer->retimer = typec_retimer_register(dev, &rtmr_desc);
> > + if (IS_ERR(retimer->retimer)) {
> > + ret = PTR_ERR(retimer->retimer);
> > + dev_err(dev, "failed to register typec retimer: %d\n", ret);
>
> Maybe dev_err_probe() as above?
Yep.
>
> > + goto err_switch_unregister;
> > + }
> > +
> > + /* skip resetting if already configured */
> > + if (regmap_test_bits(retimer->regmap, 0x00, BIT(0)))
> > + return 0;
> > +
> > + gpiod_direction_output(retimer->reset_gpio, 1);
> > +
> > + /* VDD IO supply enable to reset release delay */
> > + usleep_range(4000, 14000);
> > +
> > + gpiod_set_value(retimer->reset_gpio, 0);
> > +
> > + /* firmware initialization delay */
> > + msleep(60);
> > +
> > + return 0;
> > +
> > +err_switch_unregister:
> > + typec_switch_unregister(retimer->sw);
> > +err_vregs_disable:
> > + ps883x_disable_vregs(retimer);
> > +err_clk_disable:
> > + clk_disable_unprepare(retimer->xo_clk);
> > +err_mux_put:
> > + typec_mux_put(retimer->typec_mux);
> > +err_switch_put:
> > + typec_switch_put(retimer->typec_switch);
> > +
> > + return ret;
> > +}
> > +
> > +static void ps883x_retimer_remove(struct i2c_client *client)
> > +{
> > + struct ps883x_retimer *retimer = i2c_get_clientdata(client);
> > +
> > + typec_retimer_unregister(retimer->retimer);
> > + typec_switch_unregister(retimer->sw);
> > +
> > + gpiod_set_value(retimer->reset_gpio, 1);
> > +
> > + regulator_disable(retimer->vddio_supply);
> > + regulator_disable(retimer->vddat_supply);
> > + regulator_disable(retimer->vddar_supply);
> > + regulator_disable(retimer->vdd_supply);
> > + regulator_disable(retimer->vdd33_cap_supply);
> > + regulator_disable(retimer->vdd33_supply);
>
> ps883x_disable_vregs()?
Makes sense. Will do
>
> > +
> > + clk_disable_unprepare(retimer->xo_clk);
> > +
> > + typec_mux_put(retimer->typec_mux);
> > + typec_switch_put(retimer->typec_switch);
> > +}
>
> ...
>
> CJ
Thanks for reviewing.
Abel
Powered by blists - more mailing lists