lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <db981ff0a5c4f5cae898e6cd4ffcc530e5b09ba8.1730717841.git.matthias.schiffer@ew.tq-group.com>
Date: Mon,  4 Nov 2024 12:13:33 +0100
From: Matthias Schiffer <matthias.schiffer@...tq-group.com>
To: Lee Jones <lee@...nel.org>
Cc: linux@...tq-group.com,
	linux-kernel@...r.kernel.org,
	Gregor Herburger <gregor.herburger@...group.com>,
	Matthias Schiffer <matthias.schiffer@...tq-group.com>
Subject: [PATCH v6 5/5] mfd: tqmx86: add I2C IRQ support

From: Gregor Herburger <gregor.herburger@...group.com>

The i2c-ocores controller can run in interrupt mode on tqmx86 modules.
Add module parameter to allow configuring the IRQ number, similar to the
handling of the GPIO IRQ.

The new code and module parameter refer to the I2C controller as "I2C1",
as the TQMx86 PLD actually contains a second I2C controller, for which
driver support will be added in the future.

Signed-off-by: Gregor Herburger <gregor.herburger@...group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@...tq-group.com>
---

v2: improve module parameter description (was patch 4/4)
v3: replace IRQ 0 resource with an empty placeholder to simplify error handling
v4: no changes
v5: move placeholder to the end of the resource array, use define for index
v6:
  - remove obsolete comment
  - refer to I2C controller as "I2C1"

 drivers/mfd/tqmx86.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index 1fd2212bf492c..7dd971b762578 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -50,6 +50,7 @@
 #define TQMX86_REG_IO_EXT_INT_9			2
 #define TQMX86_REG_IO_EXT_INT_12		3
 #define TQMX86_REG_IO_EXT_INT_MASK		0x3
+#define TQMX86_REG_IO_EXT_INT_I2C1_SHIFT	0
 #define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT	4
 #define TQMX86_REG_SAUC		0x17
 
@@ -60,11 +61,18 @@ static uint gpio_irq;
 module_param(gpio_irq, uint, 0);
 MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (valid parameters: 7, 9, 12)");
 
+static uint i2c1_irq;
+module_param(i2c1_irq, uint, 0);
+MODULE_PARM_DESC(i2c1_irq, "I2C1 IRQ number (valid parameters: 7, 9, 12)");
+
 /* Index of IRQ placeholder in resource list */
 #define TQMX86_IRQ_GPIO 1
+#define TQMX86_IRQ_I2C1 1
 
-static const struct resource tqmx_i2c_soft_resources[] = {
+static struct resource tqmx_i2c_soft_resources[] = {
 	DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
+	/* Placeholder for IRQ resource - filled in by the probe function */
+	[TQMX86_IRQ_I2C1] = {},
 };
 
 static const struct resource tqmx_watchdog_resources[] = {
@@ -262,6 +270,13 @@ static int tqmx86_probe(struct platform_device *pdev)
 	ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
 
 	if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
+		if (i2c1_irq) {
+			err = tqmx86_setup_irq(dev, "I2C1", i2c1_irq, io_base,
+					       TQMX86_REG_IO_EXT_INT_I2C1_SHIFT);
+			if (!err)
+				tqmx_i2c_soft_resources[TQMX86_IRQ_I2C1] = DEFINE_RES_IRQ(i2c1_irq);
+		}
+
 		err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
 					   tqmx86_i2c_soft_dev,
 					   ARRAY_SIZE(tqmx86_i2c_soft_dev),
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ