[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4a474dae-6669-4678-87dd-e0e9692a749b@suse.de>
Date: Mon, 4 Nov 2024 15:29:30 +0200
From: Stanimir Varbanov <svarbanov@...e.de>
To: Andrea della Porta <andrea.porta@...e.com>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Florian Fainelli <florian.fainelli@...adcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczynski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>, Linus Walleij
<linus.walleij@...aro.org>, Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>, Bartosz Golaszewski <brgl@...ev.pl>,
Derek Kiernan <derek.kiernan@....com>, Dragan Cvetic
<dragan.cvetic@....com>, Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Saravana Kannan <saravanak@...gle.com>, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-rpi-kernel@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, linux-gpio@...r.kernel.org,
Masahiro Yamada <masahiroy@...nel.org>, Stefan Wahren <wahrenst@....net>,
Herve Codina <herve.codina@...tlin.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>, Andrew Lunn <andrew@...n.ch>
Subject: Re: [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's
RP1 device
Hi Andrea,
On 10/28/24 16:07, Andrea della Porta wrote:
> RaspberryPi RP1 is a multi function PCI endpoint device that
> exposes several subperipherals via PCI BAR.
> Add a dtb overlay that will be compiled into a binary blob
> and linked in the RP1 driver.
> This overlay offers just minimal support to represent the
> RP1 device itself, the sub-peripherals will be added by
> future patches.
>
> Signed-off-by: Andrea della Porta <andrea.porta@...e.com>
> ---
> NOTE: this patch should be taken by the same maintainer that will take
> "[PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver", since they
> are closely related in terms of compiling.
>
> MAINTAINERS | 1 +
> arch/arm64/boot/dts/broadcom/rp1.dtso | 61 +++++++++++++++++++++++++++
> 2 files changed, 62 insertions(+)
> create mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 06277969a522..510a071ede78 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19383,6 +19383,7 @@ F: include/uapi/linux/media/raspberrypi/
> RASPBERRY PI RP1 PCI DRIVER
> M: Andrea della Porta <andrea.porta@...e.com>
> S: Maintained
> +F: arch/arm64/boot/dts/broadcom/rp1.dtso
> F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
> diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso
> new file mode 100644
> index 000000000000..8d1bbf207a30
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/rp1.dtso
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/clock/raspberrypi,rp1-clocks.h>
> +
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> + fragment@0 {
> + target-path="";
> + __overlay__ {
> + compatible = "pci1de4,1";
> + #address-cells = <3>;
> + #size-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + pci_ep_bus: pci-ep-bus@1 {
> + compatible = "simple-bus";
> + ranges = <0xc0 0x40000000
> + 0x01 0x00 0x00000000
> + 0x00 0x00400000>;
> + dma-ranges = <0x10 0x00000000
> + 0x43000000 0x10 0x00000000
> + 0x10 0x00000000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + rp1_clocks: clocks@...0018000 {
> + compatible = "raspberrypi,rp1-clocks";
> + reg = <0xc0 0x40018000 0x0 0x10038>;
shouldn't this be:
rp1_clocks: clocks@...00 {
reg = <0x00 0x00018000 0x0 0x10038>;
...
}
?
And for other nodes too...
~Stan
> + #clock-cells = <1>;
> + clocks = <&clk_rp1_xosc>;
> + clock-names = "xosc";
> + assigned-clocks = <&rp1_clocks RP1_PLL_SYS_CORE>,
> + <&rp1_clocks RP1_PLL_SYS>,
> + <&rp1_clocks RP1_CLK_SYS>;
> + assigned-clock-rates = <1000000000>, // RP1_PLL_SYS_CORE
> + <200000000>, // RP1_PLL_SYS
> + <200000000>; // RP1_CLK_SYS
> + };
> +
> + rp1_gpio: pinctrl@...00d0000 {
> + compatible = "raspberrypi,rp1-gpio";
> + reg = <0xc0 0x400d0000 0x0 0xc000>,
> + <0xc0 0x400e0000 0x0 0xc000>,
> + <0xc0 0x400f0000 0x0 0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> + <1 IRQ_TYPE_LEVEL_HIGH>,
> + <2 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> + };
> + };
> +};
Powered by blists - more mailing lists