Message-ID: <20241105180444.770951-1-quic_rajkbhag@quicinc.com>
Date: Tue, 5 Nov 2024 23:34:39 +0530
From: Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
To: <ath12k@...ts.infradead.org>
CC: <linux-wireless@...r.kernel.org>, Kalle Valo <kvalo@...nel.org>,
        "Rob
 Herring" <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        "Conor
 Dooley" <conor+dt@...nel.org>,
        Jeff Johnson <jjohnson@...nel.org>,
        "Bjorn
 Andersson" <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
        Raj Kumar Bhagat <quic_rajkbhag@...cinc.com>
Subject: [RFC PATCH v3 0/5] wifi: ath12k: Add wifi device node with WSI for QCN9274 in RDP433

The RDP433 is a Qualcomm Reference Design Platform based on the
IPQ9574. It features three QCN9274 WiFi devices connected to PCIe1,
PCIe2, and PCIe3. These devices are also interconnected via a WLAN
Serial Interface (WSI) connection. This WSI connection is essential
for exchanging control information among these devices.

This patch series describes the WSI interface found in QCN9274 in
device tree and uses this device tree node in the Ath12k driver to get the
details of WSI connection for Multi Link Operation (MLO) among multiple
QCN9274 devices.

NOTES:
1. As ath12k MLO patches are not ready yet, this patchset does not apply
   to the ath.git ath-next branch and that's why the patchset is marked
   as RFC. These are the work-in-progress patches we have at the moment.
   The full set of MLO patches is available at:
   https://git.kernel.org/pub/scm/linux/kernel/git/ath/ath.git/log/?h=ath12k-mlo-qcn9274

2. The dependency marked below applies only to the DTS patch. The
   dt-bindings patches do not have this dependency.

Depends-On: [PATCH V7 0/4] Add PCIe support for IPQ9574
Link: https://lore.kernel.org/linux-pci/20240801054803.3015572-1-quic_srichara@quicinc.com/

v3:
- Created a separate binding "qcom,ath12k-wsi.yaml" to describe ath12k PCI
  devices with WSI interface.
- The "wsi" node is dropped.
- The property "qcom,wsi-master" renamed to "qcom,wsi-controller".
- Updated description for "qcom,wsi-controller".
- The "qcom,wsi-group-id" property is dropped.
- The ath12k driver changes added to dynamically assign wsi group IDs.
- DTS changes done to make device node name generic (wifi).
- The patch series title is updated.

v2: https://patchwork.kernel.org/project/linux-wireless/cover/20241029173050.2188150-1-quic_rajkbhag@quicinc.com/
- "Graph with endpoint” is used to define the actual WSI connection in
  the DT binding.
- The qcom,wsi-index and qcom,wsi-num-devices properties are dropped
  from the binding. These are now determined in the driver using the
  graph with endpoint.
- The qcom,wsi-master property is added to the binding to define the
  WSI master.
- The qcom,ath12k-calibration-variant property is added to the binding
  for ath12k devices.
- DTS changes are made based on the “graph with endpoint” binding.
- The ath12k driver is updated to read graph nodes, determine the number
  of devices in WSI, and assign the wsi-index for each device.
- The ath12k driver now assigns hardware link IDs based on the order of
  WSI connections.

v1: https://patchwork.kernel.org/project/linux-wireless/cover/20241023060352.605019-1-quic_rajkbhag@quicinc.com/

Aditya Kumar Singh (1):
  wifi: ath12k: Assign unique hardware link IDs during QMI host
    capability

Harshitha Prem (1):
  wifi: ath12k: Parse multiple device information from device tree

Karthikeyan Periyasamy (1):
  wifi: ath12k: Send partner device details in QMI MLO capability

Raj Kumar Bhagat (2):
  dt-bindings: net: wireless: Describe ath12k PCI module with WSI
  arm64: dts: qcom: ipq9574: Add WiFi nodes for RDP433

 .../net/wireless/qcom,ath12k-wsi.yaml         | 205 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts   | 105 ++++++++-
 drivers/net/wireless/ath/ath12k/core.c        | 178 +++++++++++++--
 drivers/net/wireless/ath/ath12k/core.h        |  10 +
 drivers/net/wireless/ath/ath12k/qmi.c         | 120 ++++++++--
 5 files changed, 588 insertions(+), 30 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml


base-commit: 7603a9349b2fc64152a734f253cf8d8e5befb6db
prerequisite-patch-id: d1334693a2e8da65ae7b458ee4adb459850ad2e7
prerequisite-patch-id: 87f73b342f67c2636390a7da1294cee90f1fff48
prerequisite-patch-id: 46d8302766527d16cdd90c59ded6cbae0ec4ad70
prerequisite-patch-id: b17db6783b1c35f3e8812f621730fe0a1a57a14e
-- 
2.34.1

Powered by blists - more mailing lists