[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241105064206.43626-3-hs@denx.de>
Date: Tue, 5 Nov 2024 07:42:05 +0100
From: Heiko Schocher <hs@...x.de>
To: linux-kernel@...r.kernel.org
Cc: Heiko Schocher <hs@...x.de>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Neil Armstrong <neil.armstrong@...aro.org>,
Rob Herring <robh@...nel.org>,
devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org
Subject: [PATCH v3 2/3] dt-bindings: pinctrl: sx150xq: allow gpio line naming
Adding gpio-line-names property works fine for this
device node, but dtb check drops warning:
'gpio-line-names' does not match any of the regexes: '-cfg$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml#
Allow to add property gpio-line-names for this devices.
Signed-off-by: Heiko Schocher <hs@...x.de>
---
checkpatch shows
WARNING: Prefer a maximum 75 chars per line (possible unwrapped commit description?)
'gpio-line-names' does not match any of the regexes: '-cfg$', 'pinctrl-[0-9]+'
Ignored, as it is a make output, which helps to understand the
reason for adding this patch.
Changes in v3:
- worked in comments from Krzysztof
gpio-line-names should match the actual number of
gpios of the device.
Changes in v2:
patch dt-bindings: pinctrl: sx150xq: allow gpio line naming new in v2
.../bindings/pinctrl/semtech,sx1501q.yaml | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
index 4214d7311f6b..39d7dad3313b 100644
--- a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
@@ -26,6 +26,10 @@ properties:
reg:
maxItems: 1
+ gpio-line-names:
+ minItems: 5
+ maxItems: 17
+
interrupts:
maxItems: 1
@@ -87,6 +91,45 @@ required:
allOf:
- $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1501q
+ - semtech,sx1504q
+ - semtech,sx1507q
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 5
+ maxItems: 5
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1502q
+ - semtech,sx1505q
+ - semtech,sx1508q
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 9
+ maxItems: 9
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1503q
+ - semtech,sx1506q
+ - semtech,sx1509q
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 17
+ maxItems: 17
- if:
not:
properties:
--
2.20.1
Powered by blists - more mailing lists