[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241105091224.23453-1-b-kapoor@ti.com>
Date: Tue, 5 Nov 2024 14:42:24 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
CC: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>, <b-kapoor@...com>,
<u-kumar1@...com>, <s-sinha@...com>
Subject: [PATCH] arm64: dts: ti: k3-j722s-evm: Enable support for mcu_i2c0
Enable support for mcu_i2c0 and add pinmux required to bring out the
mcu_i2c0 signals on 40-pin RPi expansion header on the J722S EVM.
Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
Signed-off-by: Shreyash Sinha <s-sinha@...com>
---
arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index a00f4a7d20d9..796287c76b69 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -406,6 +406,13 @@ &main_uart5 {
&mcu_pmx0 {
+ mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+ pinctrl-single,pins = <
+ J722S_MCU_IOPAD(0x048, PIN_INPUT, 0) /* (E11) MCU_I2C0_SDA */
+ J722S_MCU_IOPAD(0x044, PIN_INPUT, 0) /* (B13) MCU_I2C0_SCL */
+ >;
+ };
+
mcu_mcan0_pins_default: mcu-mcan0-default-pins {
pinctrl-single,pins = <
J722S_MCU_IOPAD(0x038, PIN_INPUT, 0) /* (D8) MCU_MCAN0_RX */
@@ -812,3 +819,10 @@ &main_mcan0 {
&mcu_gpio0 {
status = "okay";
};
+
+&mcu_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_i2c0_pins_default>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
--
2.34.1
Powered by blists - more mailing lists