[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20241105125620.2114301-4-lcherian@marvell.com>
Date: Tue, 5 Nov 2024 18:26:20 +0530
From: Linu Cherian <lcherian@...vell.com>
To: <davem@...emloft.net>, <sgoutham@...vell.com>, <netdev@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <gakula@...vell.com>, <hkelam@...vell.com>, <sbhatta@...vell.com>,
<jerinj@...vell.com>, <edumazet@...gle.com>, <kuba@...nel.org>,
<pabeni@...hat.com>, Linu Cherian <lcherian@...vell.com>
Subject: [PATCH v5 net-next 3/3] devlink: Add documentation for OcteonTx2 AF
Add documentation for the following devlink params
- npc_mcam_high_zone_percent
- npc_def_rule_cntr
- nix_maxlf
Signed-off-by: Linu Cherian <lcherian@...vell.com>
---
Changelog from v4:
- Describe the behaviour when counters are not sufficient to meet all
the enabled rules
- Add definition for default rules
- Add sample commands to read counters for default rules
- "Reviewed-by" from Simon not added due to above changes.
.../networking/devlink/octeontx2.rst | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst
index d33a90dd44bf..84206537aedb 100644
--- a/Documentation/networking/devlink/octeontx2.rst
+++ b/Documentation/networking/devlink/octeontx2.rst
@@ -40,6 +40,27 @@ The ``octeontx2 AF`` driver implements the following driver-specific parameters.
- runtime
- Use to set the quantum which hardware uses for scheduling among transmit queues.
Hardware uses weighted DWRR algorithm to schedule among all transmit queues.
+ * - ``npc_mcam_high_zone_percent``
+ - u8
+ - runtime
+ - Use to set the number of high priority zone entries in NPC MCAM that can be allocated
+ by a user, out of the three priority zone categories high, mid and low.
+ * - ``npc_def_rule_cntr``
+ - bool
+ - runtime
+ - Use to enable or disable hit counters for the default rules in NPC MCAM.
+ Its not guaranteed that counters gets enabled and mapped to all the default rules,
+ since the counters are scarce and driver follows a best effort approach.
+ The default rule serves as the primary packet steering rule for a specific PF or VF,
+ based on its DMAC address which is installed by AF driver as part of its initialization.
+ Sample command to read hit counters for default rule from debugfs is as follows,
+ cat /sys/kernel/debug/cn10k/npc/mcam_rules
+ * - ``nix_maxlf``
+ - u16
+ - runtime
+ - Use to set the maximum number of LFs in NIX hardware block. This would be useful
+ to increase the availability of default resources allocated to enabled LFs like
+ MCAM entries for example.
The ``octeontx2 PF`` driver implements the following driver-specific parameters.
--
2.34.1
Powered by blists - more mailing lists