linux-kernel - Re: [PATCH v10 4/4] ARM: dts: mxs: Add descriptions for imx287 based btt3-[012] devices

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <335a558f-f537-4a8e-86dc-9f76324eb206@gmx.net>
Date: Wed, 6 Nov 2024 20:26:18 +0100
From: Stefan Wahren <wahrenst@....net>
To: Lukasz Majewski <lukma@...x.de>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
 Sascha Hauer <s.hauer@...gutronix.de>
Cc: Pengutronix Kernel Team <kernel@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>, devicetree@...r.kernel.org,
 imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v10 4/4] ARM: dts: mxs: Add descriptions for imx287 based
 btt3-[012] devices

Hi Lukasz,

Am 06.11.24 um 11:57 schrieb Lukasz Majewski:
> On Thu, 31 Oct 2024 09:42:36 +0100
> Lukasz Majewski <lukma@...x.de> wrote:
>
>> Dear Community,
>>
>>> The btt3 device' HW revisions from 0 to 2 use imx287 SoC and are to
>>> some extend similar to already upstreamed XEA devices, hence are
>>> using common imx28-lwe.dtsi file.
>>>
>>> New, imx28-btt3.dtsi has been added to embrace common DTS
>>> properties for different HW revisions for this device.
>>>
>>> As a result - changes introduced in imx28-btt3-[012].dts are
>>> minimal.
>>>
>>> Signed-off-by: Lukasz Majewski <lukma@...x.de>
>>>
>>> ---
>>> Changes for v2:
>>> - Rename dts file from btt3-[012] to imx28-btt3-[012] to match
>>> current linux kernel naming convention
>>> - Remove 'wlf,wm8974' from compatible for codec@1a
>>>
>>> Changes for v3:
>>> - Keep alphabethical order for Makefile entries
>>>
>>> Changes for v4:
>>> - Change compatible for btt3 board (to 'lwn,imx28-btt3')
>>>
>>> Changes for v5:
>>> - Combine patch, which adds btt3-[012] with one adding board entry
>>> to fsl.yaml
>>>
>>> Changes for v6:
>>> - Make the patch series for adding entry in fsl.yaml and btt3
>>>
>>> Changes for v7:
>>> - Use "panel" property as suggested by the community
>>> - Use panel-timing to specify the display parameters
>>> - Update subject line with correct tags
>>>
>>> Changes for v8:
>>> - Use GPIO_ACTIVE_HIGH instead of '0'
>>> - Add the comment regarding mac address specification
>>> - Remove superfluous comment
>>> - Change wifi-en-pin node name
>>>
>>> Changes for v9:
>>> - Remove not used 'pm-ignore-notify'
>>> - Add display names for 'panel-dpi' compatible to avoid Schema
>>> warnings
>>>
>>> Changes for v10:
>>> - Drop new line with panel-timing definitions
>>> - Add new lines with 'sound' node
>>> - Change 'codec' to 'audio-codec'
>>> - Change order of properties for saif1 node
>> Are there any more comments regarding this patch?
> Gentle ping on this patch set.
I do not see a reason to ping on this series as long Rob's comment from
Oct 22th is not addressed.

Please reply to him if something is not clear.

Best regards