lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241106090311.17536-3-alexisczezar.torreno@analog.com>
Date: Wed, 6 Nov 2024 17:03:11 +0800
From: Alexis Cezar Torreno <alexisczezar.torreno@...log.com>
To: <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-hwmon@...r.kernel.org>
CC: Radu Sabau <radu.sabau@...log.com>, Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>, Rob Herring <robh@...nel.org>,
        Krzysztof
 Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>, Jonathan
 Corbet <corbet@....net>,
        Alexis Cezar Torreno
	<alexisczezar.torreno@...log.com>,
        Andy Shevchenko
	<andriy.shevchenko@...ux.intel.com>,
        Uwe Kleine-König
	<u.kleine-koenig@...gutronix.de>
Subject: [PATCH 2/2] hwmon: (pmbus/adp1050): Support adp1051 and adp1055

ADP1051: 6 PWM for I/O Voltage, I/O Current, Temperature
ADP1055: 6 PWM for I/O Voltage, I/O Current, Power, Temperature
Signed-off-by: Alexis Cezar Torreno <alexisczezar.torreno@...log.com>
---
 Documentation/hwmon/adp1050.rst | 52 ++++++++++++++++++++++++++++++---
 drivers/hwmon/pmbus/adp1050.c   | 44 +++++++++++++++++++++++++---
 2 files changed, 88 insertions(+), 8 deletions(-)

diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst
index 8fa937064886..5e2edcbe0c59 100644
--- a/Documentation/hwmon/adp1050.rst
+++ b/Documentation/hwmon/adp1050.rst
@@ -13,18 +13,33 @@ Supported chips:
 
     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
 
+  * Analog Devices ADP1051
+
+    Prefix: 'adp1051'
+
+    Addresses scanned: I2C 0x70 - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1051.pdf
+
+  * Analog Devices ADP1055
+
+    Prefix: 'adp1055'
+
+    Addresses scanned: I2C 0x4B - 0x77
+
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1055.pdf
+
 Authors:
 
   - Radu Sabau <radu.sabau@...log.com>
 
-
 Description
 -----------
 
-This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
-Controller for Isolated Power Supply with PMBus interface.
+This driver supports hardware monitoring for Analog Devices ADP1050, ADP1051, and
+ADP1055 Digital Controller for Isolated Power Supply with PMBus interface.
 
-The ADP1050 is an advanced digital controller with a PMBus™
+The ADP105X is an advanced digital controller with a PMBus™
 interface targeting high density, high efficiency dc-to-dc power
 conversion used to monitor system temperatures, voltages and currents.
 Through the PMBus interface, the device can monitor input/output voltages,
@@ -49,16 +64,45 @@ Sysfs Attributes
 in1_label         "vin"
 in1_input         Measured input voltage
 in1_alarm	  Input voltage alarm
+in1_crit          Critical maximum input voltage
+in1_crit_alarm    Input voltage high alarm
+in1_lcrit         Critical minimum input voltage
+in1_lcrit_alarm   Input voltage critical low alarm
 in2_label	  "vout1"
 in2_input	  Measured output voltage
 in2_crit	  Critical maximum output voltage
 in2_crit_alarm    Output voltage high alarm
 in2_lcrit	  Critical minimum output voltage
 in2_lcrit_alarm	  Output voltage critical low alarm
+in2_max           Critical maximum output voltage
+in2_max_alarm     Output voltage critical max alarm
+in2_min           Critical minimum output voltage
+in2_min_alarm     Output voltage critical min alarm
 curr1_label	  "iin"
 curr1_input	  Measured input current.
 curr1_alarm	  Input current alarm
+curr1_crit        Critical maximum input current
+curr1_crit_alarm  Input current high alarm
+curr2_label       "iout1"
+curr2_input       Measured output current
+curr2_crit        Critical maximum output current
+curr2_crit_alarm  Output current high alarm
+curr2_lcrit       Critical minimum output current
+curr2_lcrit_alarm Output current critical low alarm
+curr2_max         Critical maximum output current
+curr2_max_alarm   Output current critical max alarm
+power1_label      "pout1"
+power1_input      Measured output power
+power1_crit       Critical maximum output power
+power1_crit_alarm Output power high alarm
 temp1_input       Measured temperature
 temp1_crit	  Critical high temperature
 temp1_crit_alarm  Chip temperature critical high alarm
+temp1_max         Critical maximum temperature
+temp1_max_alarm   Temperature critical max alarm
+temp2_input       Measured temperature
+temp2_crit        Critical high temperature
+temp2_crit_alarm  Chip temperature critical high alarm
+temp2_max         Critical maximum temperature
+temp2_max_alarm   Temperature critical max alarm
 ================= ========================================
diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c
index 20f22730fc01..db2054181d14 100644
--- a/drivers/hwmon/pmbus/adp1050.c
+++ b/drivers/hwmon/pmbus/adp1050.c
@@ -6,8 +6,8 @@
  */
 #include <linux/bits.h>
 #include <linux/i2c.h>
-#include <linux/mod_devicetable.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 
 #include "pmbus.h"
 
@@ -23,19 +23,55 @@ static struct pmbus_driver_info adp1050_info = {
 		| PMBUS_HAVE_STATUS_TEMP,
 };
 
+static struct pmbus_driver_info adp1051_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT
+		   | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT
+		   | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT
+		   | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static struct pmbus_driver_info adp1055_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT
+		   | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3
+		   | PMBUS_HAVE_POUT | PMBUS_HAVE_STATUS_VOUT
+		   | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT
+		   | PMBUS_HAVE_STATUS_TEMP,
+};
+
 static int adp1050_probe(struct i2c_client *client)
 {
-	return pmbus_do_probe(client, &adp1050_info);
+	const struct pmbus_driver_info *info;
+
+	info = device_get_match_data(&client->dev);
+	if (!info)
+		return -ENODEV;
+
+	return pmbus_do_probe(client, info);
 }
 
 static const struct i2c_device_id adp1050_id[] = {
-	{"adp1050"},
+	{ .name = "adp1050", .driver_data = (kernel_ulong_t)&adp1050_info},
+	{ .name = "adp1051", .driver_data = (kernel_ulong_t)&adp1051_info},
+	{ .name = "adp1055", .driver_data = (kernel_ulong_t)&adp1055_info},
 	{}
 };
+
 MODULE_DEVICE_TABLE(i2c, adp1050_id);
 
 static const struct of_device_id adp1050_of_match[] = {
-	{ .compatible = "adi,adp1050"},
+	{ .compatible = "adi,adp1050", .data = &adp1050_info},
+	{ .compatible = "adi,adp1051", .data = &adp1051_info},
+	{ .compatible = "adi,adp1055", .data = &adp1055_info},
 	{}
 };
 MODULE_DEVICE_TABLE(of, adp1050_of_match);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ