| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <04b86150-c6f5-2898-5b43-dcf14c19845e@linux.intel.com>
Date: Wed, 6 Nov 2024 12:54:12 +0200 (EET)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Bjorn Helgaas <helgaas@...nel.org>
cc: Jian-Hong Pan <jhp@...lessos.org>, Johan Hovold <johan@...nel.org>,
David Box <david.e.box@...ux.intel.com>,
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>,
Nirmal Patel <nirmal.patel@...ux.intel.com>,
Jonathan Derrick <jonathan.derrick@...ux.dev>, linux-pci@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>, linux@...lessos.org
Subject: Re: [PATCH v12 3/3] PCI/ASPM: Make pci_save_aspm_l1ss_state save
both child and parent's L1SS configuration
On Tue, 5 Nov 2024, Bjorn Helgaas wrote:
> On Tue, Oct 01, 2024 at 04:34:42PM +0800, Jian-Hong Pan wrote:
> > PCI devices' parameters on the VMD bus have been programmed properly
> > originally. But, cleared after pci_reset_bus() and have not been restored
> > correctly. This leads the link's L1.2 between PCIe Root Port and child
> > device gets wrong configs.
> >
> > Here is a failed example on ASUS B1400CEAE with enabled VMD. Both PCIe
> > bridge and NVMe device should have the same LTR1.2_Threshold value.
> > However, they are configured as different values in this case:
> >
> > 10000:e0:06.0 PCI bridge [0604]: Intel Corporation 11th Gen Core Processor PCIe Controller [8086:9a09] (rev 01) (prog-if 00 [Normal decode])
> > ...
> > Capabilities: [200 v1] L1 PM Substates
> > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
> > PortCommonModeRestoreTime=45us PortTPowerOnTime=50us
> > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> > T_CommonMode=0us LTR1.2_Threshold=0ns
> > L1SubCtl2: T_PwrOn=0us
> >
> > 10000:e1:00.0 Non-Volatile memory controller [0108]: Sandisk Corp WD Blue SN550 NVMe SSD [15b7:5009] (rev 01) (prog-if 02 [NVM Express])
> > ...
> > Capabilities: [900 v1] L1 PM Substates
> > L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
> > PortCommonModeRestoreTime=32us PortTPowerOnTime=10us
> > L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> > T_CommonMode=0us LTR1.2_Threshold=101376ns
> > L1SubCtl2: T_PwrOn=50us
> >
> > Here is VMD mapped PCI device tree:
> >
> > -+-[0000:00]-+-00.0 Intel Corporation Device 9a04
> > | ...
> > \-[10000:e0]-+-06.0-[e1]----00.0 Sandisk Corp WD Blue SN550 NVMe SSD
> > \-17.0 Intel Corporation Tiger Lake-LP SATA Controller
> >
> > When pci_reset_bus() resets the bus [e1] of the NVMe, it only saves and
> > restores NVMe's state before and after reset. Then, when it restores the
> > NVMe's state, ASPM code restores L1SS for both the parent bridge and the
> > NVMe in pci_restore_aspm_l1ss_state(). The NVMe's L1SS is restored
> > correctly. But, the parent bridge's L1SS is restored with a wrong value 0x0
> > because the parent bridge's L1SS wasn't saved by pci_save_aspm_l1ss_state()
> > before reset.
>
> There's nothing specific to VMD here, is there? This whole log looks
> like it should be made generic. The VMD *example* is OK, but the
> justification should not be VMD-specific. This last paragraph seems
> to be the kernel of the whole thing, and I don't think it's specific
> to either VMD or NVMe.
>
> > So, if the PCI device has a parent, make pci_save_aspm_l1ss_state() save
> > the parent's L1SS configuration, too. This is symmetric on
> > pci_restore_aspm_l1ss_state().
> >
> > Link: https://lore.kernel.org/linux-pci/CAPpJ_eexU0gCHMbXw_z924WxXw0+B6SdS4eG9oGpEX1wmnMLkQ@mail.gmail.com/
> > Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218394
> > Fixes: 17423360a27a ("PCI/ASPM: Save L1 PM Substates Capability for suspend/resume")
> > Suggested-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
> > Signed-off-by: Jian-Hong Pan <jhp@...lessos.org>
> > ---
> > v9:
> > - Drop the v8 fix about drivers/pci/pcie/aspm.c. Use this in VMD instead.
> >
> > v10:
> > - Drop the v9 fix about drivers/pci/controller/vmd.c
> > - Fix in PCIe ASPM to make it symmetric between pci_save_aspm_l1ss_state()
> > and pci_restore_aspm_l1ss_state()
> >
> > v11:
> > - Introduce __pci_save_aspm_l1ss_state as a resusable helper function
> > which is same as the original pci_configure_aspm_l1ss
> > - Make pci_save_aspm_l1ss_state invoke __pci_save_aspm_l1ss_state for
> > both child and parent devices
> > - Smooth the commit message
> >
> > v12:
> > - Update the commit message
> >
> > drivers/pci/pcie/aspm.c | 20 +++++++++++++++++++-
> > 1 file changed, 19 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
> > index bd0a8a05647e..17cdf372f7e0 100644
> > --- a/drivers/pci/pcie/aspm.c
> > +++ b/drivers/pci/pcie/aspm.c
> > @@ -79,7 +79,7 @@ void pci_configure_aspm_l1ss(struct pci_dev *pdev)
> > ERR_PTR(rc));
> > }
> >
> > -void pci_save_aspm_l1ss_state(struct pci_dev *pdev)
> > +static void __pci_save_aspm_l1ss_state(struct pci_dev *pdev)
> > {
> > struct pci_cap_saved_state *save_state;
> > u16 l1ss = pdev->l1ss;
> > @@ -101,6 +101,24 @@ void pci_save_aspm_l1ss_state(struct pci_dev *pdev)
> > pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, cap++);
> > }
> >
> > +void pci_save_aspm_l1ss_state(struct pci_dev *pdev)
> > +{
> > + struct pci_dev *parent;
> > +
> > + __pci_save_aspm_l1ss_state(pdev);
>
> Is there any point in saving the "pdev" state if there's no parent?
>
> > + /*
> > + * To be symmetric on pci_restore_aspm_l1ss_state(), save parent's L1
> > + * substate configuration, if the parent has not saved state.
> > + */
> > + if (!pdev->bus || !pdev->bus->self)
> > + return;
>
> Is "pdev->bus == NULL" possible here even though it doesn't seem
> possible in pci_restore_aspm_l1ss_state()?
>
> > + parent = pdev->bus->self;
> > + if (!parent->state_saved)
> > + __pci_save_aspm_l1ss_state(parent);
> > +}
>
> I see the suggestion for a helper here, but I'm not convinced.
> pci_save_aspm_l1ss_state() and pci_restore_aspm_l1ss_state() should
> *look* similar, and a helper makes them less similar.
>
> I think you should go to some effort to follow the
> pci_restore_aspm_l1ss_state() structure, as much as possible doing the
> same declarations, checks, and lookups in the same order, e.g.:
>
> struct pci_cap_saved_state *pl_save_state, *cl_save_state;
> struct pci_dev *parent = pdev->bus->self;
>
> if (pcie_downstream_port(pdev) || !parent)
> return;
>
> if (!pdev->l1ss || !parent->l1ss)
> return;
>
> cl_save_state = pci_find_saved_ext_cap(pdev, PCI_EXT_CAP_ID_L1SS);
> pl_save_state = pci_find_saved_ext_cap(parent, PCI_EXT_CAP_ID_L1SS);
> if (!cl_save_state || !pl_save_state)
> return;
Hi,
I understand I'm not the one who has the final say in this, but the reason
why restore has to be done the way it is (the long way), is because of the
strict ordering requirement of operations it performs.
There are no similar ordering requirements on the save side AFAIK.
--
i.
Powered by blists - more mailing lists