[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zy1CxtKSgRuEPX5A@lizhi-Precision-Tower-5810>
Date: Thu, 7 Nov 2024 17:44:22 -0500
From: Frank Li <Frank.li@....com>
To: Niklas Cassel <cassel@...nel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>, Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
imx@...ts.linux.dev, dlemoal@...nel.org, maz@...nel.org,
tglx@...utronix.de, jdmason@...zu.us
Subject: Re: [PATCH v4 3/5] PCI: endpoint: pci-epf-test: Add doorbell test
support
On Thu, Nov 07, 2024 at 10:52:24PM +0100, Niklas Cassel wrote:
> On Thu, Oct 31, 2024 at 12:27:02PM -0400, Frank Li wrote:
> > Add three registers: doorbell_bar, doorbell_addr, and doorbell_data,
> > along with doorbell_done. Use pci_epf_alloc_doorbell() to allocate a
> > doorbell address space.
> >
> > Enable the Root Complex (RC) side driver to trigger pci-epc-test's doorbell
> > callback handler by writing doorbell_data to the mapped doorbell_bar's
> > address space.
> >
> > Set doorbell_done in the doorbell callback to indicate completion.
> >
> > To avoid broken compatibility, add new command COMMAND_ENABLE_DOORBELL
> > and COMMAND_DISABLE_DOORBELL. Host side need send COMMAND_ENABLE_DOORBELL
> > to map one bar's inbound address to MSI space. the command
> > COMMAND_DISABLE_DOORBELL to recovery original inbound address mapping.
> >
> > Host side new driver Host side old driver
> >
> > EP: new driver S F
> > EP: old driver F F
> >
> > S: If EP side support MSI, 'pcitest -B' return success.
> > If EP side doesn't support MSI, the same to 'F'.
> >
> > F: 'pcitest -B' return failure, other case as usual.
> >
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > ---
> > change from v3 to v4
> > - remove revid requirement
> > - Add command COMMAND_ENABLE_DOORBELL and COMMAND_DISABLE_DOORBELL.
> > - call pci_epc_set_bar() to map inbound address to MSI space only at
> > COMMAND_ENABLE_DOORBELL.
> > ---
> > drivers/pci/endpoint/functions/pci-epf-test.c | 104 ++++++++++++++++++++++++++
> > 1 file changed, 104 insertions(+)
> >
> > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
> > index 7c2ed6eae53ad..dcb69921497fd 100644
> > --- a/drivers/pci/endpoint/functions/pci-epf-test.c
> > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c
> > @@ -11,12 +11,14 @@
> > #include <linux/dmaengine.h>
> > #include <linux/io.h>
> > #include <linux/module.h>
> > +#include <linux/msi.h>
> > #include <linux/slab.h>
> > #include <linux/pci_ids.h>
> > #include <linux/random.h>
> >
> > #include <linux/pci-epc.h>
> > #include <linux/pci-epf.h>
> > +#include <linux/pci-ep-msi.h>
> > #include <linux/pci_regs.h>
> >
> > #define IRQ_TYPE_INTX 0
> > @@ -29,6 +31,8 @@
> > #define COMMAND_READ BIT(3)
> > #define COMMAND_WRITE BIT(4)
> > #define COMMAND_COPY BIT(5)
> > +#define COMMAND_ENABLE_DOORBELL BIT(6)
> > +#define COMMAND_DISABLE_DOORBELL BIT(7)
> >
> > #define STATUS_READ_SUCCESS BIT(0)
> > #define STATUS_READ_FAIL BIT(1)
> > @@ -39,6 +43,11 @@
> > #define STATUS_IRQ_RAISED BIT(6)
> > #define STATUS_SRC_ADDR_INVALID BIT(7)
> > #define STATUS_DST_ADDR_INVALID BIT(8)
> > +#define STATUS_DOORBELL_SUCCESS BIT(9)
> > +#define STATUS_DOORBELL_ENABLE_SUCCESS BIT(10)
> > +#define STATUS_DOORBELL_ENABLE_FAIL BIT(11)
> > +#define STATUS_DOORBELL_DISABLE_SUCCESS BIT(12)
> > +#define STATUS_DOORBELL_DISABLE_FAIL BIT(13)
> >
> > #define FLAG_USE_DMA BIT(0)
> >
> > @@ -74,6 +83,9 @@ struct pci_epf_test_reg {
> > u32 irq_type;
> > u32 irq_number;
> > u32 flags;
> > + u32 doorbell_bar;
> > + u32 doorbell_addr;
> > + u32 doorbell_data;
> > } __packed;
> >
> > static struct pci_epf_header test_header = {
> > @@ -630,6 +642,60 @@ static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test,
> > }
> > }
> >
> > +static void pci_epf_enable_doorbell(struct pci_epf_test *epf_test, struct pci_epf_test_reg *reg)
> > +{
> > + enum pci_barno bar = reg->doorbell_bar;
> > + struct pci_epf *epf = epf_test->epf;
> > + struct pci_epc *epc = epf->epc;
> > + struct pci_epf_bar db_bar;
> > + struct msi_msg *msg;
> > + u64 doorbell_addr;
> > + u32 align;
> > + int ret;
> > +
> > + align = epf_test->epc_features->align;
> > + align = align ? align : 128;
> > +
> > + if (bar < BAR_0 || bar == epf_test->test_reg_bar || !epf->db_msg) {
> > + reg->status |= STATUS_DOORBELL_ENABLE_FAIL;
> > + return;
> > + }
> > +
> > + msg = &epf->db_msg[0].msg;
> > + doorbell_addr = msg->address_hi;
> > + doorbell_addr <<= 32;
> > + doorbell_addr |= msg->address_lo;
> > +
> > + db_bar.phys_addr = round_down(doorbell_addr, align);
> > + db_bar.barno = bar;
> > + db_bar.size = epf->bar[bar].size;
> > + db_bar.flags = epf->bar[bar].flags;
> > + db_bar.addr = NULL;
> > +
> > + ret = pci_epc_set_bar(epc, epf->func_no, epf->vfunc_no, &db_bar);
> > + if (!ret)
> > + reg->status |= STATUS_DOORBELL_ENABLE_SUCCESS;
> > +}
> > +
> > +static void pci_epf_disable_doorbell(struct pci_epf_test *epf_test, struct pci_epf_test_reg *reg)
> > +{
> > + enum pci_barno bar = reg->doorbell_bar;
> > + struct pci_epf *epf = epf_test->epf;
> > + struct pci_epc *epc = epf->epc;
> > + int ret;
> > +
> > + if (bar < BAR_0 || bar == epf_test->test_reg_bar || !epf->db_msg) {
> > + reg->status |= STATUS_DOORBELL_DISABLE_FAIL;
> > + return;
> > + }
> > +
> > + ret = pci_epc_set_bar(epc, epf->func_no, epf->vfunc_no, &epf->bar[bar]);
> > + if (ret)
> > + reg->status |= STATUS_DOORBELL_DISABLE_FAIL;
> > + else
> > + reg->status |= STATUS_DOORBELL_DISABLE_SUCCESS;
> > +}
> > +
> > static void pci_epf_test_cmd_handler(struct work_struct *work)
> > {
> > u32 command;
> > @@ -676,6 +742,14 @@ static void pci_epf_test_cmd_handler(struct work_struct *work)
> > pci_epf_test_copy(epf_test, reg);
> > pci_epf_test_raise_irq(epf_test, reg);
> > break;
> > + case COMMAND_ENABLE_DOORBELL:
> > + pci_epf_enable_doorbell(epf_test, reg);
> > + pci_epf_test_raise_irq(epf_test, reg);
> > + break;
> > + case COMMAND_DISABLE_DOORBELL:
> > + pci_epf_disable_doorbell(epf_test, reg);
> > + pci_epf_test_raise_irq(epf_test, reg);
> > + break;
> > default:
> > dev_err(dev, "Invalid command 0x%x\n", command);
> > break;
> > @@ -810,11 +884,24 @@ static int pci_epf_test_link_down(struct pci_epf *epf)
> > return 0;
> > }
> >
> > +static int pci_epf_test_doorbell(struct pci_epf *epf, int index)
> > +{
> > + struct pci_epf_test *epf_test = epf_get_drvdata(epf);
> > + enum pci_barno test_reg_bar = epf_test->test_reg_bar;
> > + struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
> > +
> > + reg->status |= STATUS_DOORBELL_SUCCESS;
> > + pci_epf_test_raise_irq(epf_test, reg);
> > +
> > + return 0;
> > +}
> > +
> > static const struct pci_epc_event_ops pci_epf_test_event_ops = {
> > .epc_init = pci_epf_test_epc_init,
> > .epc_deinit = pci_epf_test_epc_deinit,
> > .link_up = pci_epf_test_link_up,
> > .link_down = pci_epf_test_link_down,
> > + .doorbell = pci_epf_test_doorbell,
> > };
> >
> > static int pci_epf_test_alloc_space(struct pci_epf *epf)
> > @@ -909,6 +996,23 @@ static int pci_epf_test_bind(struct pci_epf *epf)
> > if (ret)
> > return ret;
> >
> > + ret = pci_epf_alloc_doorbell(epf, 1);
>
> Calling pci_epf_alloc_doorbell() unconditionally from bind will lead to the
> following print for all platforms that have not configured a msi-parent:
> [ 64.543388] a40000000.pcie-ep: Failed to allocate MSI
>
> In ealier discussions, I thought that you wanted to call
> pci_epf_alloc_doorbell() in pci_epf_enable_doorbell(), and then let
> pci_epf_enable_doorbell() return STATUS_DOORBELL_ENABLE_FAIL
> if pci_epf_enable_doorbell() failed.
>
>
> Perhaps you could modify pci_epf_enable_doorbell() to also check if
> dev->msi.domain is NULL, before calling pci_epc_alloc_doorbell(),
> and if dev->msi.domain is NULL, perhaps print a clearer error,
> e.g. "no msi domain found, is 'msi-parent' device tree property missing?"
> Or put the text in a comment next to the error check, if you think that a
> print seems too silly.
I think resource should be allocated in bind. it may be too frequent to
allocate and free msi resources when call pci_epf_enable_doorbell()/
pci_epf_disable_doorbell().
If you think "a40000000.pcie-ep: Failed to allocate MSI" a noise, I think
we can add a msi_domain check in pci_epc_alloc_doorbell() and print a nice
message at pci_epc_alloc_doorbell().
It should be similar as eDMA detect. It'd better show captiblity
information at beginning instead of defer to when use it.
Frank
>
>
> > + if (!ret) {
> > + struct pci_epf_test_reg *reg = epf_test->reg[test_reg_bar];
> > + struct msi_msg *msg = &epf->db_msg[0].msg;
> > + u32 align = epc_features->align;
> > + u64 doorbell_addr;
> > +
> > + align = align ? align : 128;
> > + doorbell_addr = msg->address_hi;
> > + doorbell_addr <<= 32;
> > + doorbell_addr |= msg->address_lo;
> > +
> > + reg->doorbell_addr = doorbell_addr & (align - 1);
> > + reg->doorbell_data = msg->data;
> > + reg->doorbell_bar = pci_epc_get_next_free_bar(epc_features, test_reg_bar + 1);
> > + }
> > +
> > return 0;
> > }
> >
> >
> > --
> > 2.34.1
> >
Powered by blists - more mailing lists