lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241107061124.105930-2-xandfury@gmail.com>
Date: Wed,  6 Nov 2024 23:11:23 -0700
From: Abhinav Saxena <xandfury@...il.com>
To: linux-kernel-mentees@...ts.linuxfoundation.org,
	linux-gpio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-tegra@...r.kernel.org,
	linux-mips@...r.kernel.org,
	linuxppc-dev@...ts.ozlabs.org,
	linux-arm-kernel@...ts.infradead.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
	Bartosz Golaszewski <brgl@...ev.pl>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Thierry Reding <thierry.reding@...il.com>,
	Jonathan Hunter <jonathanh@...dia.com>,
	Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	Abhinav Saxena <xandfury@...il.com>
Subject: [PATCH 1/2] Documentation: dt-bindings: Fix repeated words

Fix unintentional word repetitions in devicetree binding documentation:
- usb.txt: Fix repeated "two"
- mvebu-devbus.txt: Fix repeated "from"
- gpio.txt: Fix repeated "Both"
- pinctrl-bindings.txt: Fix repeated "device"
- cavium/bootbus.txt: Fix repeated "one"

These issues were identified using the checkpatch.pl script.

Signed-off-by: Abhinav Saxena <xandfury@...il.com>
---
 Documentation/devicetree/bindings/gpio/gpio.txt                 | 2 +-
 .../devicetree/bindings/memory-controllers/mvebu-devbus.txt     | 2 +-
 Documentation/devicetree/bindings/mips/cavium/bootbus.txt       | 2 +-
 Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt  | 2 +-
 Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt     | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index d82c32217fff..530420475a4f 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -304,7 +304,7 @@ pins 50..69.
 It is also possible to use pin groups for gpio ranges when pin groups are the
 easiest and most convenient mapping.
 
-Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+Both <pinctrl-base> and <count> must set to 0 when using named pin groups
 names.
 
 The property gpio-ranges-group-names must contain exactly one string for each
diff --git a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
index 8b9388cc1ccc..1983d7eabd2b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mvebu-devbus.txt
@@ -43,7 +43,7 @@ Read parameters:
  - devbus,bus-width:    Defines the bus width, in bits (e.g. <16>).
                         Mandatory, except if devbus,keep-config is used.
 
- - devbus,badr-skew-ps: Defines the time delay from from A[2:0] toggle,
+ - devbus,badr-skew-ps: Defines the time delay from A[2:0] toggle,
                         to read data sample. This parameter is useful for
                         synchronous pipelined devices, where the address
                         precedes the read data by one or two cycles.
diff --git a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
index 6581478225a2..1bc655d285ce 100644
--- a/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
+++ b/Documentation/devicetree/bindings/mips/cavium/bootbus.txt
@@ -15,7 +15,7 @@ Properties:
 
 - #size-cells: Must be <1>.
 
-- ranges: There must be one one triplet of (child-bus-address,
+- ranges: There must be one triplet of (child-bus-address,
   parent-bus-address, length) for each active chip select.  If the
   length element for any triplet is zero, the chip select is disabled,
   making it inactive.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 6904072d3944..500b76ba2ab3 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -18,7 +18,7 @@ states. The number and names of those states is defined by the client device's
 own binding.
 
 The common pinctrl bindings defined in this file provide an infrastructure
-for client device device tree nodes to map those state names to the pin
+for client device tree nodes to map those state names to the pin
 configuration used by those states.
 
 Note that pin controllers themselves may also be client devices of themselves.
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
index da13999337a4..682db2b561bb 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt
@@ -3,7 +3,7 @@ Freescale QUICC Engine USB Controller
 Required properties:
 - compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
 - reg : the first two cells should contain usb registers location and
-  length, the next two two cells should contain PRAM location and
+  length, the next two cells should contain PRAM location and
   length.
 - interrupts : should contain USB interrupt.
 - fsl,fullspeed-clock : specifies the full speed USB clock source:
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ