[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <9fe4ff30-79ca-453d-a84d-53969062813c@ti.com>
Date: Thu, 7 Nov 2024 11:43:44 +0530
From: Bhavya Kapoor <b-kapoor@...com>
To: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
CC: <s-sinha@...com>, <ankurbaranwal@...com>, <u-kumar1@...com>,
<linux-arm-kernel@...ts.infradead.org>, <conor+dt@...nel.org>,
<krzk+dt@...nel.org>, <robh@...nel.org>, <kristo@...nel.org>,
<vigneshr@...com>, <nm@...com>
Subject: Re: [PATCH] arm64: dts: ti: k3-j722s-evm: Add pinmux for RPi Header
Kindly reject this patch as i will send another version with few
modifications.
Thanks
On 28/10/24 1:54 pm, Bhavya Kapoor wrote:
> Add pinmux required to bring out the i2c and gpios on
> 40-pin RPi expansion header on the J722S EVM.
>
> Signed-off-by: Bhavya Kapoor <b-kapoor@...com>
> Signed-off-by: Shreyash Sinha <s-sinha@...com>
> ---
>
> Rebased To - next-20241025
>
> arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 62 +++++++++++++++++++++++++
> 1 file changed, 62 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> index a00f4a7d20d9..7dce021a8a3c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> @@ -359,6 +359,32 @@ audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
> J722S_IOPAD(0x00a0, PIN_OUTPUT, 1) /* (N24) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
> >;
> };
> +
> + rpi_header_gpio0_pins_default: rpi-header-gpio0-default-pins {
> + pinctrl-single,pins = <
> + J722S_IOPAD(0x094, PIN_INPUT, 7) /* (P26) GPIO0_36 */
> + J722S_IOPAD(0x088, PIN_INPUT, 7) /* (N22) GPIO0_33 */
> + J722S_IOPAD(0x0ac, PIN_INPUT, 7) /* (P21) GPIO0_42 */
> + J722S_IOPAD(0x0a8, PIN_INPUT, 7) /* (R27) GPIO0_41 */
> + >;
> + };
> +
> + rpi_header_gpio1_pins_default: rpi-header-gpio1-default-pins {
> + pinctrl-single,pins = <
> + J722S_IOPAD(0x1b0, PIN_INPUT, 7) /* (F24) GPIO1_14 */
> + J722S_IOPAD(0x1ac, PIN_INPUT, 7) /* (C27) GPIO1_13 */
> + J722S_IOPAD(0x198, PIN_INPUT, 7) /* (A26) GPIO1_8 */
> + J722S_IOPAD(0x1a4, PIN_INPUT, 7) /* (D25) GPIO1_11 */
> + J722S_IOPAD(0x194, PIN_INPUT, 7) /* (A25) GPIO1_7 */
> + J722S_IOPAD(0x1b8, PIN_INPUT, 7) /* (C20) GPIO1_16 */
> + J722S_IOPAD(0x1a8, PIN_INPUT, 7) /* (C26) GPIO1_12 */
> + J722S_IOPAD(0x1a0, PIN_INPUT, 7) /* (F23) GPIO1_10 */
> + J722S_IOPAD(0x19c, PIN_INPUT, 7) /* (B25) GPIO1_9 */
> + J722S_IOPAD(0x1b4, PIN_INPUT, 7) /* (B20) GPIO1_15 */
> + J722S_IOPAD(0x1bc, PIN_INPUT, 7) /* (D20) GPIO1_17 */
> + J722S_IOPAD(0x1c0, PIN_INPUT, 7) /* (E19) GPIO1_18 */
> + >;
> + };
> };
>
> &cpsw3g {
> @@ -387,6 +413,8 @@ &cpsw_port1 {
> };
>
> &main_gpio1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rpi_header_gpio1_pins_default>;
> status = "okay";
> };
>
> @@ -443,6 +471,25 @@ J722S_MCU_IOPAD(0x050, PIN_INPUT_PULLUP, 0) /* (C6) WKUP_I2C1_SDA */
> >;
> bootph-all;
> };
> +
> + mcu_rpi_header_gpio0_pins_default: mcu-rpi-header-gpio0-default-pins {
> + pinctrl-single,pins = <
> + J722S_MCU_IOPAD(0x01c, PIN_INPUT, 7) /* (B5) MCU_GPIO0_7 */
> + J722S_MCU_IOPAD(0x020, PIN_INPUT, 7) /* (C5) MCU_GPIO0_8 */
> + J722S_MCU_IOPAD(0x00c, PIN_INPUT, 7) /* (B12) MCU_GPIO0_3 */
> + J722S_MCU_IOPAD(0x010, PIN_INPUT, 7) /* (C11) MCU_GPIO0_4 */
> + J722S_MCU_IOPAD(0x008, PIN_INPUT, 7) /* (A9) MCU_GPIO0_2 */
> + J722S_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (C12) MCU_GPIO0_0 */
> + J722S_MCU_IOPAD(0x004, PIN_INPUT, 7) /* (A10) MCU_GPIO0_1 */
> + >;
> + };
> +
> + mcu_i2c0_pins_default: mcu-i2c0-default-pins {
> + pinctrl-single,pins = <
> + J722S_MCU_IOPAD(0x048, PIN_INPUT, 0) /* (E11) MCU_I2C0_SDA */
> + J722S_MCU_IOPAD(0x044, PIN_INPUT, 0) /* (B13) MCU_I2C0_SCL */
> + >;
> + };
> };
>
> &wkup_uart0 {
> @@ -810,5 +857,20 @@ &main_mcan0 {
> };
>
> &mcu_gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_rpi_header_gpio0_pins_default>;
> + status = "okay";
> +};
> +
> +&main_gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rpi_header_gpio0_pins_default>;
> + status = "okay";
> +};
> +
> +&mcu_i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mcu_i2c0_pins_default>;
> + clock-frequency = <400000>;
> status = "okay";
> };
Powered by blists - more mailing lists