linux-kernel - Re: [RFC PATCH v1 2/2] PCI/AER: report fatal errors of RCiEP and EP if link recoverd

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <736d94be-fad9-445e-acce-81cae1a05d46@linux.alibaba.com>
Date: Thu, 7 Nov 2024 09:27:02 +0800
From: Shuai Xue <xueshuai@...ux.alibaba.com>
To: Keith Busch <kbusch@...nel.org>
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
 linuxppc-dev@...ts.ozlabs.org, bhelgaas@...gle.com, mahesh@...ux.ibm.com,
 oohall@...il.com, sathyanarayanan.kuppuswamy@...ux.intel.com
Subject: Re: [RFC PATCH v1 2/2] PCI/AER: report fatal errors of RCiEP and EP
 if link recoverd



在 2024/11/7 00:39, Keith Busch 写道:
> On Wed, Nov 06, 2024 at 05:03:39PM +0800, Shuai Xue wrote:
>> +int aer_get_device_fatal_error_info(struct pci_dev *dev, struct aer_err_info *info)
>> +{
>> +	int type = pci_pcie_type(dev);
>> +	int aer = dev->aer_cap;
>> +	u32 aercc;
>> +
>> +	pci_info(dev, "type :%d\n", type);
>> +
>> +	/* Must reset in this function */
>> +	info->status = 0;
>> +	info->tlp_header_valid = 0;
>> +	info->severity = AER_FATAL;
>> +
>> +	/* The device might not support AER */
>> +	if (!aer)
>> +		return 0;
>> +
>> +
>> +	if (type == PCI_EXP_TYPE_ENDPOINT || type == PCI_EXP_TYPE_RC_END) {
>> +		/* Link is healthy for IO reads now */
>> +		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,
>> +			&info->status);
>> +		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK,
>> +			&info->mask);
>> +		if (!(info->status & ~info->mask))
>> +			return 0;
>> +
>> +		/* Get First Error Pointer */
>> +		pci_read_config_dword(dev, aer + PCI_ERR_CAP, &aercc);
>> +		info->first_error = PCI_ERR_CAP_FEP(aercc);
>> +
>> +		if (info->status & AER_LOG_TLP_MASKS) {
>> +			info->tlp_header_valid = 1;
>> +			pcie_read_tlp_log(dev, aer + PCI_ERR_HEADER_LOG, &info->tlp);
>> +		}
> 
> This matches the uncorrectable handling in aer_get_device_error_info, so
> perhaps a helper to reduce duplication.

Yes, will do.

> 
>> +	}
>> +
>> +	return 1;
>> +}
> 
> Returning '1' even if type is root or downstream port?
> 
>>   static inline void aer_process_err_devices(struct aer_err_info *e_info)
>>   {
>>   	int i;
>> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
>> index 31090770fffc..a74ae6a55064 100644
>> --- a/drivers/pci/pcie/err.c
>> +++ b/drivers/pci/pcie/err.c
>> @@ -196,6 +196,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>>   	struct pci_dev *bridge;
>>   	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
>>   	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
>> +	struct aer_err_info info;
>>   
>>   	/*
>>   	 * If the error was detected by a Root Port, Downstream Port, RCEC,
>> @@ -223,6 +224,10 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>>   			pci_warn(bridge, "subordinate device reset failed\n");
>>   			goto failed;
>>   		}
>> +
>> +		/* Link recovered, report fatal errors on RCiEP or EP */
>> +		if (aer_get_device_fatal_error_info(dev, &info))
>> +			aer_print_error(dev, &info);
> 
> This will always print the error info even for root and downstream
> ports, but you initialize "info" status and mask only if it's an EP or
> RCiEP.

Got it. Will fix it.

Thank you for valuable comments.

Best Regards,
Shuai